Search Linux Wireless

Re: [BISECTED] igb initialization failure on Bay Trail

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



пн, 25 июл. 2022 г. в 20:08, Pierre-Louis Bossart
<pierre-louis.bossart@xxxxxxxxxxxxxxx>:
>
>
>
> On 7/24/22 16:00, Matwey V. Kornilov wrote:
> > Hello,
> >
> > I've just found that the following commit
> >
> >     648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
> >
> > breaks the ethernet on my Lex 3I380CW (Atom E3845) motherboard. The board is
> > equipped with dual Intel I211 based 1Gbps copper ethernet.
>
> It's not going to be simple, it's 4 yr old commit that fixes other
> issues with S0i3...

Additionally, it seems that the issue appears only when CONFIG_IGB=m
is used. When CONFIG_IGB=y then both ethernets are initialized
correctly.
However, most (if not all) kernel configs in Linux distros use CONFIG_IGB=m

>
> >
> > Before the commit I see the following:
> >
> >      igb 0000:01:00.0: added PHC on eth0
> >      igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
> >      igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 4c:02:89:10:02:e4
> >      igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
> >      igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
> >      igb 0000:02:00.0: added PHC on eth1
> >      igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
> >      igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 4c:02:89:10:02:e5
> >      igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
> >      igb 0000:02:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
> >
> > while when the commit is applied I see the following:
> >
> >      igb 0000:01:00.0: added PHC on eth0
> >      igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
> >      igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 4c:02:89:10:02:e4
> >      igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
> >      igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
> >      igb: probe of 0000:02:00.0 failed with error -2
> >
> > Please note, that the second ethernet initialization is failed.
> >
> >
> > See also: http://www.lex.com.tw/products/pdf/3I380A&3I380CW.pdf



-- 
With best regards,
Matwey V. Kornilov




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux