[BISECTED] igb initialization failure on Bay Trail

"Matwey V. Kornilov" <matwey.kornilov@xxxxxxxxx> · Mon, 25 Jul 2022 00:00:37 +0300

Hello,

I've just found that the following commit

    648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")

breaks the ethernet on my Lex 3I380CW (Atom E3845) motherboard. The board is
equipped with dual Intel I211 based 1Gbps copper ethernet.

Before the commit I see the following:

     igb 0000:01:00.0: added PHC on eth0
     igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
     igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 4c:02:89:10:02:e4
     igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
     igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
     igb 0000:02:00.0: added PHC on eth1
     igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
     igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 4c:02:89:10:02:e5
     igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
     igb 0000:02:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)

while when the commit is applied I see the following:

     igb 0000:01:00.0: added PHC on eth0
     igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
     igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 4c:02:89:10:02:e4
     igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
     igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
     igb: probe of 0000:02:00.0 failed with error -2

Please note, that the second ethernet initialization is failed.

See also: http://www.lex.com.tw/products/pdf/3I380A&3I380CW.pdf