Hi Cameron,
On Fri, Nov 16, 2018 at 5:59 PM Cameron Kellough
<cameron@xxxxxxxxxxxxxxxxxxxxxx> wrote:
>
> I did a quick review of the Technexion dts file and it looks like they setup the iomux so that the clock Arend mentioned is needed actually gets muxed out to GPIO1_IO03.
>
> From the technexion imx7d-pico.dtsi under the iomuxc_lpsr group:
>
> pinctrl_hog_2: hoggrp-2 {
> fsl,pins = <
> MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x7d /* wifi LPO 32K Hz clock */
> MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x59 /* pmic sd_vel pin*/
> >;
> };
Could you please test the following patch against mainline that
implements this suggestion?
http://dark-code.bulix.org/4m18pb-507579
Thanks,
Fabio Estevam
