> > What can I do about this? My wireless card is unusable. Seems to be a > spontaneous failure. This is the output of dmesg | grep iwlwifi: > > [ 7.206387] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) > [ 7.215066] iwlwifi 0000:02:00.0: loaded firmware version > 36.7596afd4.0 op_mode iwlmvm > [ 7.686950] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band > Wireless AC 8260, REV=0x208 > [ 7.769839] iwlwifi 0000:02:00.0: base HW address: 14:ab:c5:7c:5e:a2 > [ 7.770427] iwlwifi 0000:02:00.0: Microcode SW error detected. > Restarting 0x2000000. > [ 7.770555] iwlwifi 0000:02:00.0: Start IWL Error Log Dump: > [ 7.770557] iwlwifi 0000:02:00.0: Status: 0x00000100, count: 6 > [ 7.770559] iwlwifi 0000:02:00.0: Loaded firmware version: 36.7596afd4.0 > [ 7.770561] iwlwifi 0000:02:00.0: 0x00001392 | ADVANCED_SYSASSERT > [ 7.770562] iwlwifi 0000:02:00.0: 0x000002F2 | trm_hw_status0 > [ 7.770564] iwlwifi 0000:02:00.0: 0x00000000 | trm_hw_status1 > [ 7.770565] iwlwifi 0000:02:00.0: 0x000124BE | branchlink2 > [ 7.770566] iwlwifi 0000:02:00.0: 0x0001C1E2 | interruptlink1 > [ 7.770568] iwlwifi 0000:02:00.0: 0x00000000 | interruptlink2 > [ 7.770569] iwlwifi 0000:02:00.0: 0x0000010B | data1 > [ 7.770570] iwlwifi 0000:02:00.0: 0x00000000 | data2 > [ 7.770572] iwlwifi 0000:02:00.0: 0xDEADBEEF | data3 Report of bug on bugzilla.kernel.org as explained here: https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi/debugging >From what I see this is a bug in calibrations. Not fun. > > This happened once before, about a year ago. It resolved itself when I > tried installing Windows 10 and running an update. Now when I try a > clean install of Windows 10 it bluescreens on startup with probable > cause Netwtw06.sys. > Even less fun. When you want to compare this to any other problem you have seen, please check the ASSERT number. In this case, you have ASSERT 1392.
