On 10-11-17 13:43, Vanessa Maegima wrote:
Hi,
On Qui, 2017-09-21 at 12:30 -0300, Vanessa Ayumi Maegima wrote:
Hi Arend,
On Thu, Sep 21, 2017 at 4:26 AM, Arend van Spriel
<arend.vanspriel@xxxxxxxxxxxx> wrote:
On 20-09-17 21:33, Vanessa Ayumi Maegima wrote:
Hi,
I am trying to enable Wifi on imx7d-pico using mainline kernel.
imx7d-pico
has an AP6335 chip.
I am facing some issues related to the nvram file. I am using the
firmware
provided by Buildroot (brcmfmac4339-sdio.bin). I get the
following error:
[ 8.630380] brcmfmac: brcmf_sdio_htclk: HT Avail timeout
(1000000):
clkctl 0x50
I have tried to use the firmware and nvram provided by TechNexion
but I
get
the same error.
Is there anyone that could enable Wifi on AP6335 using kernel
mainline?
What nvram file was used?
I am able to use Wifi on the board if I use the firmware, nvram
file and
kernel
provided by TechNexion. They use a 4.1 kernel from NXP with the
bcmdhd
driver.
So I know that the hardware is functional.
Any suggestions as how to get it working with a 4.13 and brcmfmac
driver
is
appreciated.
So the nvram file is specific to the wifi chipset on your platform
so best
to stick with the provided one. The "HT Avail timeout" most often
is an
indication that the firmware crashed. So getting more debug output
would
help us understand how it ended up like that. Can you build the
brcmfmac
with CONFIG_BRCMDBG and load the driver using:
$ insmod brcmfmac.ko debug=0x1416
Thanks for the reply!
Here is the log (using 4.14-rc1):
# dmesg | grep brcmfmac
[ 19.297206] brcmfmac: brcmfmac_module_init No platform data
available.
[ 19.307075] brcmfmac: brcmf_sdio_probe Enter
[ 19.308384] brcmfmac: F1 signature read @0x18000000=0x16224335
[ 19.309026] brcmfmac: brcmf_chip_recognition found AXI chip:
BCM4339, rev=2
[ 19.317115] brcmfmac: brcmf_chip_cores_check [1 ] core 0x800:46
base 0x18000000 wrap 0x18100000
[ 19.317141] brcmfmac: brcmf_chip_cores_check [2 ] core 0x812:46
base 0x18001000 wrap 0x18101000
[ 19.317165] brcmfmac: brcmf_chip_cores_check [3 ] core 0x83e:4
base 0x18002000 wrap 0x18102000
[ 19.317188] brcmfmac: brcmf_chip_cores_check [4 ] core 0x83c:4
base 0x18003000 wrap 0x18103000
[ 19.317210] brcmfmac: brcmf_chip_cores_check [5 ] core 0x81a:20
base 0x18004000 wrap 0x18104000
[ 19.317233] brcmfmac: brcmf_chip_cores_check [6 ] core 0x829:21
base 0x18005000 wrap 0x18105000
[ 19.317256] brcmfmac: brcmf_chip_cores_check [7 ] core 0x135:0
base 0x00000000 wrap 0x18109000
[ 19.317279] brcmfmac: brcmf_chip_cores_check [8 ] core 0x240:0
base 0x00000000 wrap 0x00000000
[ 19.317298] brcmfmac: brcmf_chip_set_passive Enter
[ 19.322232] brcmfmac: brcmf_chip_get_raminfo RAM: base=0x180000
size=786432 (0xc0000) sr=0 (0x0)
[ 19.322457] brcmfmac: brcmf_chip_setup ccrev=46, pmurev=23,
pmucaps=0x39cc5f17
[ 19.322481] brcmfmac: brcmf_get_module_param Enter, bus=0,
chip=17209, rev=2
[ 19.322504] brcmfmac: brcmf_sdiod_sgtable_alloc nents=35
[ 19.322531] brcmfmac: brcmf_sdio_kso_init Enter
[ 19.322618] brcmfmac: brcmf_sdio_drivestrengthinit No SDIO driver
strength init needed for chip 43
39 rev 2 pmurev 23
[ 19.323235] brcmfmac: brcmf_attach Enter
[ 19.323725] brcmfmac: brcmf_proto_attach Enter
[ 19.323769] brcmfmac: brcmf_fweh_register event handler registered
for PSM_WATCHDOG
[ 19.324306] brcmfmac: brcmf_sdio_probe completed!!
[ 19.324337] brcmfmac: brcmf_fw_map_chip_to_name: using
brcm/brcmfmac4339-sdio.bin for chip 0x00433
9(17209) rev 0x000002
[ 19.335353] brcmfmac: brcmf_fw_get_firmwares_pcie enter:
dev=mmc0:0001:1
[ 19.351787] brcmfmac: brcmf_fw_request_code_done enter:
dev=mmc0:0001:1
[ 19.353202] brcmfmac: brcmf_fw_request_nvram_done enter:
dev=mmc0:0001:1
[ 19.353424] brcmfmac: brcmf_sdio_firmware_callback Enter:
dev=mmc0:0001:1, err=0
[ 19.353814] brcmfmac: brcmf_sdio_download_code_file Enter
[ 19.388586] brcmfmac: brcmf_sdio_verifymemory Compare RAM dl & ul
at 0x00180000; size=493599
[ 19.546675] brcmfmac: brcmf_sdio_download_nvram Enter
[ 19.547432] brcmfmac: brcmf_sdio_verifymemory Compare RAM dl & ul
at 0x0023f730; size=2256
[ 19.548665] brcmfmac: brcmf_chip_set_active Enter
[ 20.562974] brcmfmac: brcmf_sdio_htclk: HT Avail timeout
(1000000):
clkctl 0x50
[ 20.570490] brcmfmac: brcmf_sdio_firmware_callback failed:
dev=mmc0:0001:1, err=0
[ 20.570739] brcmfmac: brcmf_sdio_remove Enter
[ 20.570775] brcmfmac: brcmf_detach Enter
[ 20.610414] brcmfmac: brcmf_bus_change_state 0 -> 0
[ 20.610441] brcmfmac: brcmf_sdio_bus_stop Enter
[ 21.622477] brcmfmac: brcmf_sdio_htclk: HT Avail timeout
(1000000):
clkctl 0x50
[ 21.630912] brcmfmac: brcmf_proto_detach Enter
[ 21.630967] brcmfmac: brcmf_fweh_unregister event handler cleared
for PSM_WATCHDOG
[ 22.642457] brcmfmac: brcmf_sdio_htclk: HT Avail timeout
(1000000):
clkctl 0x50
[ 22.680131] brcmfmac: brcmf_chip_set_passive Enter
[ 22.682580] brcmfmac: brcmf_sdio_remove Disconnected
Any suggestions on this?
Sorry for not getting back to your earlier email. Thanks for the
reminder. So you tried different firmwares, right? Can you provide
output of the following command:
$ strings firmware.bin | tail -1
for the firmwares you tried.
Regards,
Arend
Regards,
Arend
Thanks!
Regards,
Vanessa
