Sebastian Gottschall <s.gottschall@xxxxxxxxxx> writes: > Am 21.11.2017 um 08:58 schrieb Kalle Valo: >> Sven Eckelmann <sven.eckelmann@xxxxxxxxxxxx> writes: >> >>> On Dienstag, 15. November 2016 22:07:29 CET akolli@xxxxxxxxxxxxxxxx wrote: >>>> From: Anilkumar Kolli <akolli@xxxxxxxxxxxxxxxx> >>>> >>>> Per peer tx stats are part of 'HTT_10_4_T2H_MSG_TYPE_PEER_STATS' >>>> event, Firmware sends one HTT event for every four PPDUs. >>>> HTT payload has success pkts/bytes, failed pkts/bytes, retry >>>> pkts/bytes and rate info per ppdu. >>>> Peer stats are enabled through 'WMI_SERVICE_PEER_STATS', >>>> which are nowadays enabled by default. >>>> >>>> Parse peer stats and update the tx rate information per STA. >>>> >>>> tx rate, Peer stats are tested on QCA4019 with Firmware version >>>> 10.4-3.2.1-00028. >>>> >>>> Signed-off-by: Anilkumar Kolli <akolli@xxxxxxxxxxxxxxxx> >>> Why is the support for 10.2.4 firmware not upstreamed? I mean the one which is >>> using pktlog to transfer the PEER_STATS information. >> I'm not sure what you are asking. If you are asking the firmware release >> mentioned in the commit log that's in ath10k-firmware: >> >> https://github.com/kvalo/ath10k-firmware/tree/master/QCA4019/hw1.0/3.2.1 >> >> But I'm sure you know that already. > > i believe he is just talking about a patch which allows to get station > statistics like rx and tx rate on the firmare 10.2 series which is > qca988x mainly > > this patch was posted here months ago but never got upstream Any pointers to the patch? Patch title or link to patchwork would help. I see hundreds of patches per release, I cannot remember all of them. -- Kalle Valo
