Am 21.11.2017 um 08:58 schrieb Kalle Valo:
Sven Eckelmann <sven.eckelmann@xxxxxxxxxxxx> writes:
On Dienstag, 15. November 2016 22:07:29 CET akolli@xxxxxxxxxxxxxxxx wrote:
From: Anilkumar Kolli <akolli@xxxxxxxxxxxxxxxx>
Per peer tx stats are part of 'HTT_10_4_T2H_MSG_TYPE_PEER_STATS'
event, Firmware sends one HTT event for every four PPDUs.
HTT payload has success pkts/bytes, failed pkts/bytes, retry
pkts/bytes and rate info per ppdu.
Peer stats are enabled through 'WMI_SERVICE_PEER_STATS',
which are nowadays enabled by default.
Parse peer stats and update the tx rate information per STA.
tx rate, Peer stats are tested on QCA4019 with Firmware version
10.4-3.2.1-00028.
Signed-off-by: Anilkumar Kolli <akolli@xxxxxxxxxxxxxxxx>
Why is the support for 10.2.4 firmware not upstreamed? I mean the one which is
using pktlog to transfer the PEER_STATS information.
I'm not sure what you are asking. If you are asking the firmware release
mentioned in the commit log that's in ath10k-firmware:
https://github.com/kvalo/ath10k-firmware/tree/master/QCA4019/hw1.0/3.2.1
But I'm sure you know that already.
i believe he is just talking about a patch which allows to get station
statistics like rx and tx rate on the firmare 10.2 series which is
qca988x mainly
this patch was posted here months ago but never got upstream
--
Mit freundlichen Grüssen / Regards
Sebastian Gottschall / CTO
NewMedia-NET GmbH - DD-WRT
Firmensitz: Stubenwaldallee 21a, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473
Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: s.gottschall@xxxxxxxxxx
Tel.: +496251-582650 / Fax: +496251-5826565
