Sven Eckelmann <sven.eckelmann@xxxxxxxxxxxx> writes: > On Dienstag, 15. November 2016 22:07:29 CET akolli@xxxxxxxxxxxxxxxx wrote: >> From: Anilkumar Kolli <akolli@xxxxxxxxxxxxxxxx> >> >> Per peer tx stats are part of 'HTT_10_4_T2H_MSG_TYPE_PEER_STATS' >> event, Firmware sends one HTT event for every four PPDUs. >> HTT payload has success pkts/bytes, failed pkts/bytes, retry >> pkts/bytes and rate info per ppdu. >> Peer stats are enabled through 'WMI_SERVICE_PEER_STATS', >> which are nowadays enabled by default. >> >> Parse peer stats and update the tx rate information per STA. >> >> tx rate, Peer stats are tested on QCA4019 with Firmware version >> 10.4-3.2.1-00028. >> >> Signed-off-by: Anilkumar Kolli <akolli@xxxxxxxxxxxxxxxx> > > Why is the support for 10.2.4 firmware not upstreamed? I mean the one which is > using pktlog to transfer the PEER_STATS information. I'm not sure what you are asking. If you are asking the firmware release mentioned in the commit log that's in ath10k-firmware: https://github.com/kvalo/ath10k-firmware/tree/master/QCA4019/hw1.0/3.2.1 But I'm sure you know that already. -- Kalle Valo
