On 30 June 2016 at 21:24, Michael Eskowitz <MichaelE@xxxxxxxxxxxxxxx> wrote: > insmod brcmfmac.ko > firmware_path=ISM4334X_Wifi_FW_6.10.190.49_P.bin > nvram_path=ISM4334X_NVRAM_C1.txt > > I receive the following errors: > > brcmfmac: Unknown symbol brcmu_pktq_mlen (err 0) > brcmfmac: Unknown symbol brcmu_pkt_buf_free_skb (err 0) > brcmfmac: Unknown symbol brcmu_pktq_init (err 0) > brcmfmac: Unknown symbol brcmu_pktq_penq_head (err 0) > brcmfmac: Unknown symbol brcmu_pktq_pdeq (err 0) > brcmfmac: Unknown symbol brcmu_pktq_peek_tail (err 0) > brcmfmac: Unknown symbol brcmu_pktq_flush (err 0) > brcmfmac: Unknown symbol brcmu_pktq_pdeq_match (err 0) > brcmfmac: Unknown symbol brcmu_pktq_mdeq (err 0) > brcmfmac: Unknown symbol brcmu_pktq_penq (err 0) > brcmfmac: Unknown symbol brcmu_pktq_pdeq_tail (err 0) > brcmfmac: Unknown symbol brcmu_pkt_buf_get_skb (err 0) > brcmfmac: Unknown symbol brcmu_d11_attach (err 0) > insmod: ERROR: could not insert module brcmfmac.ko: Unknown symbol > in module > > I'm not sure that the firmware_path and nvram_path should be specified in > this manner, but I doubt that is what is causing these errors. > > The module compiled and built just fine so I am assuming that there are some > dependencies that aren't being met. Is there another module that I need to > load before attempting to load the fmac driver? If you don't know module dependencies, why not use something that handled this for you? Replace insmod with modprobe. You can't load brcmfmac.ko without loading brcmutil.ko first. -- Rafał -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
