On 1-7-2016 11:07, Rafał Miłecki wrote: > On 30 June 2016 at 21:24, Michael Eskowitz <MichaelE@xxxxxxxxxxxxxxx> wrote: >> insmod brcmfmac.ko >> firmware_path=ISM4334X_Wifi_FW_6.10.190.49_P.bin >> nvram_path=ISM4334X_NVRAM_C1.txt >> >> I receive the following errors: >> >> brcmfmac: Unknown symbol brcmu_pktq_mlen (err 0) >> brcmfmac: Unknown symbol brcmu_pkt_buf_free_skb (err 0) >> brcmfmac: Unknown symbol brcmu_pktq_init (err 0) >> brcmfmac: Unknown symbol brcmu_pktq_penq_head (err 0) >> brcmfmac: Unknown symbol brcmu_pktq_pdeq (err 0) >> brcmfmac: Unknown symbol brcmu_pktq_peek_tail (err 0) >> brcmfmac: Unknown symbol brcmu_pktq_flush (err 0) >> brcmfmac: Unknown symbol brcmu_pktq_pdeq_match (err 0) >> brcmfmac: Unknown symbol brcmu_pktq_mdeq (err 0) >> brcmfmac: Unknown symbol brcmu_pktq_penq (err 0) >> brcmfmac: Unknown symbol brcmu_pktq_pdeq_tail (err 0) >> brcmfmac: Unknown symbol brcmu_pkt_buf_get_skb (err 0) >> brcmfmac: Unknown symbol brcmu_d11_attach (err 0) >> insmod: ERROR: could not insert module brcmfmac.ko: Unknown symbol >> in module >> >> I'm not sure that the firmware_path and nvram_path should be specified in >> this manner, but I doubt that is what is causing these errors. >> >> The module compiled and built just fine so I am assuming that there are some >> dependencies that aren't being met. Is there another module that I need to >> load before attempting to load the fmac driver? > > If you don't know module dependencies, why not use something that > handled this for you? Replace insmod with modprobe. That only works when the modules are in an installed location and depmod has been used properly, which I doubt is the case in this experiment. > You can't load brcmfmac.ko without loading brcmutil.ko first. Indeed. Regards, Arend -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
