From: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
When aggregation port limit is reached, we stop aggregation and
the data is sent to firmware. It is observed that one less packet
than the port limit is aggregated in this case. ex. 15 instead of
16.
The reason is we have redundant port limit checks before current
packet is added to aggregation buffer.
The issue is fixed by removing these checks. We already have
necessary check in precopy current buffer handling.
Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
Signed-off-by: Avinash Patil <patila@xxxxxxxxxxx>
Signed-off-by: Bing Zhao <bzhao@xxxxxxxxxxx>
---
drivers/net/wireless/mwifiex/sdio.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index 1770fa3..993841e 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -1527,8 +1527,7 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
__func__);
if (MP_TX_AGGR_IN_PROGRESS(card)) {
- if (!mp_tx_aggr_port_limit_reached(card) &&
- MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len)) {
+ if (MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len)) {
f_precopy_cur_buf = 1;
if (!(card->mp_wr_bitmap &
@@ -1540,8 +1539,7 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
/* No room in Aggr buf, send it */
f_send_aggr_buf = 1;
- if (mp_tx_aggr_port_limit_reached(card) ||
- !(card->mp_wr_bitmap &
+ if (!(card->mp_wr_bitmap &
(1 << card->curr_wr_port)))
f_send_cur_buf = 1;
else
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
