Search Linux Wireless

[PATCH 05/17] mwifiex: fix 5G association failure after leaving 2.4G IBSS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Xinming Hu <huxm@xxxxxxxxxxx>

When assocaiting to an AP , mwifiex set supported data rates
based on target AP's capability. For 5G AP(11a mode), a/n/ac mode
would possibly be set.
However, for some chips which dont support 11AC mode current config_bands
will be used instead.

For example, if we join an IBSS in 11b mode ,adapter->config_bands
will be set to 1(11b mode). Then we leave IBSS ,and try to connect
5G a/n mode AP. At this time , only 11b mode data rates will be
supported in assoc request , which result in assoc failure with
reason code 18: Association denied due to requesting station not
supporting all rates.

This patch fix such a cornel case, by adding additional check for
current chip's 11ac capability.

Reported-by: Andreas Fenkart <afenkart@xxxxxxxxx>
Signed-off-by: Xinming Hu <huxm@xxxxxxxxxxx>
Signed-off-by: Avinash Patil <patila@xxxxxxxxxxx>
Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
Signed-off-by: Marc Yang <yangyang@xxxxxxxxxxx>
Signed-off-by: Cathy Luo <cluo@xxxxxxxxxxx>
---
 drivers/net/wireless/mwifiex/sta_ioctl.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index caae973..0b998fd 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -287,10 +287,13 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss,
 			return -1;
 
 		if (mwifiex_band_to_radio_type(bss_desc->bss_band) ==
-						HostCmd_SCAN_RADIO_TYPE_BG)
+						HostCmd_SCAN_RADIO_TYPE_BG) {
 			config_bands = BAND_B | BAND_G | BAND_GN;
-		else
-			config_bands = BAND_A | BAND_AN | BAND_AAC;
+		} else {
+			config_bands = BAND_A | BAND_AN;
+			if (adapter->fw_bands & BAND_AAC)
+				config_bands |= BAND_AAC;
+		}
 
 		if (!((config_bands | adapter->fw_bands) & ~adapter->fw_bands))
 			adapter->config_bands = config_bands;
-- 
1.8.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux