On 7 February 2013 11:43, Robert Shade <robert.shade@xxxxxxxxx> wrote: > AR9160 / AR9106 Things are getting into a really odd state if that particular initial calibration isn't finishing... Things I can think of: * There's some kind of noise going on that's angering the PHY (eg a spur); * We should be doing a cold reset instead of a warm reset, upon a channel change; (That fixes some issues I've seen on the AR9280 in some environments); * Bad/incorrectly hooked up antenans. >From a software side, nothing much can be going wrong. as long as the driver isn't doing something stupid like running multiple copies of the reset / setup path on different CPUs/threads, it should be reliable. HTH, Adrian -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
