Hi, Strong enough out of band RF is still going to bleed over and it may saturate the receive amplifiers before it hits the chip and the configurable analog band-pass filter. Hence the suggestion to always TX at the same time. That way you don't have the problem of TX from one radio being strong enough to saturation. You can tune the PHY (via magic handwavy parameters that strangely enough are partially described in the ANI code :-) to reduce its sensitivity to blocker signals, but it doesn't help you if the signal is close enough by to trigger the wideband / out of band interference check. If you try and receive during that you're going to have very poor behaviour. Thanks, Adrian -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
