I've put 3 ath9k AR9380 NICs into a single system (core-i7). Each is configured for an AP on a separate 5Ghz channel (40Mhz wide). Individually, I can get about 300Mbps transmit towards the AP on any particular radio, but when running all together, total throughput is only about 475Mbps. I assume there is some cross-channel bleeding or similar. The APs are close by, so I was wondering if perhaps there was a way to configure the radios to be less sensitive and thus pay less attention to channel cross-talk? Any suggestions for things to try are appreciated! Thanks, Ben -- Ben Greear <greearb@xxxxxxxxxxxxxxx> Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
