2007/11/23, Bruno Randolf <bruno@xxxxxxxxxxxxx>:
> also perform full noise calibration in ath5k_hw_rf511x_calibrate() instead of
> just writing the bit.
>
> Changes-licensed-under: ISC
> Signed-off-by: Bruno Randolf <bruno@xxxxxxxxxxxxx>
> ---
> drivers/net/wireless/ath5k/phy.c | 3 +--
> 1 files changed, 1 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c
> index 9b91121..f250c2e 100644
> --- a/drivers/net/wireless/ath5k/phy.c
> +++ b/drivers/net/wireless/ath5k/phy.c
> @@ -1702,8 +1702,7 @@ static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah,
> ((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S));
>
> done:
> - /* Start noise floor calibration */
> - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_NF);
> + ath5k_hw_noise_floor_calibration(ah, channel->freq);
>
> /* Request RF gain */
> if (channel->val & CHANNEL_5GHZ) {
> --
> 1.5.3.4
>
>
Actually just writing the bit enables nf calibration, what this patch
does is that it also reads the value and check if it's ok.
Acked-by: Nick Kossifidis <mickflemm@xxxxxxxxx>
--
GPG ID: 0xD21DB2DB
As you read this post global entropy rises. Have Fun ;-)
Nick
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
