Search Linux Wireless

Re: Recent linux-wireless git changes have broken my prism54pci card

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday, 13. August 2007, Michael Wu wrote:
> On Monday 13 August 2007 04:58, Hans de Goede wrote:
> > Okay, I still had copies of various git revisions of prism54common.c and .h
> > (aka the culprits) on my laptop. I've run some tests again to make sure I
> > had the right revisions in mind for the breakage (which I had). I've
> > attached 2 patches:
> > diff: with this reversed my speed increases 10x and more importantly when
> > fully loading the link (using scp from a local non wireless ethernet
> > machine) it no longer looses the connection in a couple of seconds
> >
> Hm, I guess either these changes were wrong or exposed some bugs. Can you 
> check what sort of tx rates are being reported in iwconfig before and after 
> that change?
> 
> > diff2, when I do not reverse this one, it still associates, but it no
> > longer receives / or transmits packages. (no dhcp, no ping when manually
> > assigning IP's, etc).
> >
> Not sure.. this patch generally helped things on my hardware. Christian 
> Lamparter might have an idea.
> 

Well not really, It is "fast" as usual here: 
 
scp user@p54pci-pc:/usr/src/dummyzero ./
dummyzero                                                                                                               100%  236MB   1.8MB/s   02:09

iperf:
[  5] local 192.168.1.247 port 5001 connected with 192.168.1.1 port 56253
[  5]  0.0-240.7 sec    597 MBytes  20.8 Mbits/sec


=> need more data...
 
1. Which p54 firmware do you use? (It "must" be 2.7.0.0 for pci/cardbus)
2. What's your "average" txrate and Link Signal Level / Link Quality with and without the patches.
   (see iwconfig)
3. what brand/type of AP do you have? 
-> what does the beacon frame look like? (or: if you don't have a
wlan sniffer / monitor, just run: iwlist wlanX scan )
4. Can you recompile the mac80211 layer with debug options and look for
something like ethX: STA XX:YY:ZZ:AA:BB:CC Average rate: VVV ... in your syslogs?
5. are they any suspicious dmesg outputs when the "network" stops/dies?

Thanks,
	Chr.

-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux