On Fri, 2010-12-03 at 15:03 +0500, Andrey Bezrukov wrote: > I have ubuntu 64 bits, current kernel 2.6.35-23. After applying the > patch http://lists.linuxwimax.org/pipermail/wimax/2010-October/001021.html > from Paul Donohue, I had successfully compiled wimax service. I had > installed: > i2400m firmware 1.5.0 > WiMAX Tools 1.4.4 > WiMAX Network Service 1.5.1 > WPA Supplicant 0.7.2 with WPA Supplicant 0.7.x patch 1.5.1 > > When I start in console 1 > sudo wimaxd -i wmx0 > I get: > AppSrv is ready ! > Act_FullRestart! > Act_DriverDeviceStatus - DRIVER_UP > > When I start in console 2 > sudo wimaxcu connect network 21 > > in console 1 wimaxd tells me: > ACTRL-EVENT-EAP-STARTED EAP authentication started > Sending EapResponse. Data size: 25 > CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13 > CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected > Sending EapResponse. Data size: 10 > CTRL-EVENT-EAP-FAILURE EAP authentication failed > > After that wimaxcu signals Connection failure > > Could anybody tell me what I'm doing wrong? Thank you very much in advance. Looks like your network is not allowing you to connect. Can you connect with Windows? Have you activated an account?
