This patch removes an erroneous check of CSIZE, making it impossible to set
CS5.
Compiles clean, but couldn't test against hardware.
Signed-off-by: Colin Leitner <colin.leitner@xxxxxxxxx>
---
drivers/usb/serial/mos7840.c | 32 ++++++++++++++++----------------
drivers/usb/serial/spcp8x5.c | 30 ++++++++++++++----------------
2 files changed, 30 insertions(+), 32 deletions(-)
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index e5bdd98..a69da83 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1813,25 +1813,25 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
iflag = tty->termios.c_iflag;
/* Change the number of bits */
- if (cflag & CSIZE) {
- switch (cflag & CSIZE) {
- case CS5:
- lData = LCR_BITS_5;
- break;
+ switch (cflag & CSIZE) {
+ case CS5:
+ lData = LCR_BITS_5;
+ break;
- case CS6:
- lData = LCR_BITS_6;
- break;
+ case CS6:
+ lData = LCR_BITS_6;
+ break;
- case CS7:
- lData = LCR_BITS_7;
- break;
- default:
- case CS8:
- lData = LCR_BITS_8;
- break;
- }
+ case CS7:
+ lData = LCR_BITS_7;
+ break;
+
+ default:
+ case CS8:
+ lData = LCR_BITS_8;
+ break;
}
+
/* Change the Parity bit */
if (cflag & PARENB) {
if (cflag & PARODD) {
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 4abac28..5b793c3 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -348,22 +348,20 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
}
/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
- if (cflag & CSIZE) {
- switch (cflag & CSIZE) {
- case CS5:
- buf[1] |= SET_UART_FORMAT_SIZE_5;
- break;
- case CS6:
- buf[1] |= SET_UART_FORMAT_SIZE_6;
- break;
- case CS7:
- buf[1] |= SET_UART_FORMAT_SIZE_7;
- break;
- default:
- case CS8:
- buf[1] |= SET_UART_FORMAT_SIZE_8;
- break;
- }
+ switch (cflag & CSIZE) {
+ case CS5:
+ buf[1] |= SET_UART_FORMAT_SIZE_5;
+ break;
+ case CS6:
+ buf[1] |= SET_UART_FORMAT_SIZE_6;
+ break;
+ case CS7:
+ buf[1] |= SET_UART_FORMAT_SIZE_7;
+ break;
+ default:
+ case CS8:
+ buf[1] |= SET_UART_FORMAT_SIZE_8;
+ break;
}
/* Set Stop bit2 : 0:1bit 1:2bit */
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
