On Tue, Nov 05, 2013 at 10:34:06AM +0800, Shawn Guo wrote: > On Tue, Nov 05, 2013 at 09:49:35AM +0800, Peter Chen wrote: > > Add anatop phandle which is used to access anatop registers to > > control PHY's power and other USB operations. > > > > Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx> > > --- > > Documentation/devicetree/bindings/usb/mxs-phy.txt | 2 ++ > > 1 files changed, 2 insertions(+), 0 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt > > index 5835b27..e2d5211 100644 > > --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt > > +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt > > @@ -4,10 +4,12 @@ Required properties: > > - compatible: Should be "fsl,imx23-usbphy" > > This needs update too, as we now have another two compatible strings. > One question, this is needed to change when adding compatible string to dts or using that compatible string at driver? > > - reg: Should contain registers location and length > > - interrupts: Should contain phy interrupt > > +- fsl,anatop: phandle for anatop register, it is only for mx6 SoC serial > > imx6 SoC series > Will change -- Best Regards, Peter Chen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
