On Tue, Nov 05, 2013 at 10:29:50AM +0800, Shawn Guo wrote: > On Tue, Nov 05, 2013 at 09:49:33AM +0800, Peter Chen wrote: > > The mxs-phy has several bugs and features at different > > versions, the driver code can get it through of_device_id.data. > > > > Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx> > > --- > > drivers/usb/phy/phy-mxs-usb.c | 59 ++++++++++++++++++++++++++++++++++------ > > 1 files changed, 50 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c > > index fdd33b4..8b9d80c 100644 > > --- a/drivers/usb/phy/phy-mxs-usb.c > > +++ b/drivers/usb/phy/phy-mxs-usb.c > > @@ -1,5 +1,5 @@ > > /* > > - * Copyright 2012 Freescale Semiconductor, Inc. > > + * Copyright 2012-2013 Freescale Semiconductor, Inc. > > * Copyright (C) 2012 Marek Vasut <marex@xxxxxxx> > > * on behalf of DENX Software Engineering GmbH > > * > > @@ -20,6 +20,7 @@ > > #include <linux/delay.h> > > #include <linux/err.h> > > #include <linux/io.h> > > +#include <linux/of_device.h> > > > > #define DRIVER_NAME "mxs_phy" > > > > @@ -34,13 +35,55 @@ > > #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) > > #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) > > > > +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) > > + > > +/* Do disconnection between PHY and controller without vbus */ > > +#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0) > > + > > +/* > > + * The PHY will be in messy if there is an wakeup after putting > > + * bus to suspend (set portsc.suspendM) but before setting PHY to low > > + * power mode (set portsc.phcd). > > + */ > > +#define MXS_PHY_ABNORAML_IN_SUSPEND BIT(1) > > + > > +/* > > + * The SOF sends too fast after resuming, it will cause disconnection > > + * between host and high speed device. > > + */ > > +#define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2) > > + > > +struct mxs_phy_platform_flag { > > + unsigned int flags; > > +}; > > We should design it as a structure not only for flags but any data that > we may need to define. That said, mxs_phy_platform_flag is not a good > name to me. I think mxs_phy_data should be more scalable and future > proof, considering one day we may have more to add into the structure. > > > + > > +static const struct mxs_phy_platform_flag imx23_phy_data = { > > + .flags = MXS_PHY_ABNORAML_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST, > > +}; > > + > > +static const struct mxs_phy_platform_flag imx6q_phy_data = { > > + .flags = MXS_PHY_SENDING_SOF_TOO_FAST | > > + MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, > > +}; > > + > > +static const struct mxs_phy_platform_flag imx6sl_phy_data = { > > + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, > > +}; > > + > > +static const struct of_device_id mxs_phy_dt_ids[] = { > > + { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, > > + { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, }, > > + { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, > > + { /* sentinel */ } > > +}; > > +MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); > > + > > struct mxs_phy { > > struct usb_phy phy; > > struct clk *clk; > > + unsigned int flags; > > Here, we should have a pointer to struct mxs_phy_data. > Will change both of two names. Peter > > > > -#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) > > - > > static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) > > { > > int ret; > > @@ -131,6 +174,9 @@ static int mxs_phy_probe(struct platform_device *pdev) > > struct clk *clk; > > struct mxs_phy *mxs_phy; > > int ret; > > + const struct of_device_id *of_id = > > + of_match_device(mxs_phy_dt_ids, &pdev->dev); > > + const struct mxs_phy_platform_flag *platform_flag = of_id->data; > > > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > base = devm_ioremap_resource(&pdev->dev, res); > > @@ -163,6 +209,7 @@ static int mxs_phy_probe(struct platform_device *pdev) > > ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier); > > > > mxs_phy->clk = clk; > > + mxs_phy->flags = platform_flag->flags; > > > > platform_set_drvdata(pdev, &mxs_phy->phy); > > > > @@ -182,12 +229,6 @@ static int mxs_phy_remove(struct platform_device *pdev) > > return 0; > > } > > > > -static const struct of_device_id mxs_phy_dt_ids[] = { > > - { .compatible = "fsl,imx23-usbphy", }, > > - { /* sentinel */ } > > -}; > > -MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); > > - > > static struct platform_driver mxs_phy_driver = { > > .probe = mxs_phy_probe, > > .remove = mxs_phy_remove, > > -- > > 1.7.1 > > > > -- Best Regards, Peter Chen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html