On 05/28/2013 11:40 AM, Arnd Bergmann wrote: > On Tuesday 28 May 2013 11:14:37 Roger Quadros wrote: >>>> depends on USB_ARCH_HAS_EHCI >>>> + select USB_PHY if ARCH_OMAP4 >>>> + select NOP_USB_XCEIV if ARCH_OMAP4 >>>> ---help--- >>>> The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 >>>> "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. >>> >>> 'select'ing USB_PHY sounds wrong too, I think you mean 'depends on'. >>> >>> Also note that Roger Quadros has just removed the 'select NOP_USB_XCEIV' >>> there, I think you should coordinate with him. >> >> Selecting NOP_USB_XCEIV is wrong as it in turn depends on USB_PHY. >> >> I'm not for depends as it would hide USB_EHCI_HCD_OMAP in menuconfig. >> I'm for explicitly selecting both, as it makes the user's life much easier. >> But I'm afraid maintainers might object to that. > > My preferred option would be to turn the 'menuconfig PHY' into 'menu', > which is what we did to solve a similar problem in drivers/mfd: It lets > us 'select' specific PHY drivers without turning on the entire > menu. Using 'select PHY' has the nasty side-effect of creating an > incorrect dependency between the OMAP EHCI driver and all the > non-OMAP phy drivers that become visible once the usb-phy directory > gets enabled. > Good idea, thanks. I will give this a try. cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
