Hello, We have an issue when trying to use USB cameras on a particular machine using the latest mainline Linux 3.7 kernel. This is not a regression since the same issue is present with older kernels (i.e: 3.5). The cameras work fine when plugged to an USB2.0 port (using the EHCI HCD host controller driver) but they don't when using the USB3.0 port (using the xHCI HCD host controller driver). The machine's USB3.0 host controller is a NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04). When enabling trace on the uvcvideo driver I see that most frames are lost: Dec 12 11:07:58 thinclient kernel: [ 4965.597637] uvcvideo: USB isochronous frame lost (-18). Dec 12 11:07:58 thinclient kernel: [ 4965.597642] uvcvideo: USB isochronous frame lost (-18). Dec 12 11:07:58 thinclient kernel: [ 4965.597647] uvcvideo: Marking buffer as bad (error bit set). Dec 12 11:07:58 thinclient kernel: [ 4965.597651] uvcvideo: Frame complete (EOF found). Dec 12 11:07:58 thinclient kernel: [ 4965.597655] uvcvideo: EOF in empty payload. Dec 12 11:07:58 thinclient kernel: [ 4965.597661] uvcvideo: Dropping payload (out of sync). Dec 12 11:07:58 thinclient kernel: [ 4965.813294] uvcvideo: frame 486 stats: 0/2/8 packets, 0/0/8 pts The uvcvideo checks if urb->iso_frame_desc[i].status < 0 on the uvc_video_decode_isoc() function (drivers/media/usb/uvc/uvc_video.c). I checked on the xhci driver and the only place where this error code (-EXDEV) is assigned to frame->status is inside the skip_isoc_td() function (drivers/usb/host/xhci-ring.c). At this point I'm not sure if this is a bug on the xhci driver, another quirk needed by the XHCI_NEC_HOST, a camera misconfiguration on the USB Video Class driver or a firmware/hardware bug. The cameras are reported to work on the same machine but using another operating system (Windows). I was wondering if you can give me some pointers on how to be sure what's the issue or if this rings any bells to you. I've enabled both CONFIG_USB_DEBUG and CONFIG_USB_XHCI_HCD_DEBUGGING in case you need more debugging information. Thanks a lot and best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
