On 06/26/2012 04:56 PM, Alexandre Pereira da Silva wrote: > USB phy layer driver are only built if usb host is selected, but they > are used too by USB_GADGET drivers > > Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@xxxxxxxxx> Acked-by: Roland Stigge <stigge@xxxxxxxxx> > --- > drivers/usb/Makefile | 2 +- > drivers/usb/phy/Kconfig | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile > index c691eea..f5ed3d7 100644 > --- a/drivers/usb/Makefile > +++ b/drivers/usb/Makefile > @@ -46,7 +46,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ > obj-$(CONFIG_USB_SERIAL) += serial/ > > obj-$(CONFIG_USB) += misc/ > -obj-$(CONFIG_USB) += phy/ > +obj-$(CONFIG_USB_COMMON) += phy/ > obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/ > > obj-$(CONFIG_USB_ATM) += atm/ > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig > index 3cfabcb..e7cf84f 100644 > --- a/drivers/usb/phy/Kconfig > +++ b/drivers/usb/phy/Kconfig > @@ -2,11 +2,11 @@ > # Physical Layer USB driver configuration > # > comment "USB Physical Layer drivers" > - depends on USB > + depends on USB || USB_GADGET > > config USB_ISP1301 > tristate "NXP ISP1301 USB transceiver support" > - depends on USB > + depends on USB || USB_GADGET > depends on I2C > help > Say Y here to add support for the NXP ISP1301 USB transceiver driver. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
