USB phy layer driver are only built if usb host is selected, but they are used too by USB_GADGET drivers Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@xxxxxxxxx> --- drivers/usb/Makefile | 2 +- drivers/usb/phy/Kconfig | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index c691eea..f5ed3d7 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -46,7 +46,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB) += misc/ -obj-$(CONFIG_USB) += phy/ +obj-$(CONFIG_USB_COMMON) += phy/ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/ obj-$(CONFIG_USB_ATM) += atm/ diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 3cfabcb..e7cf84f 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -2,11 +2,11 @@ # Physical Layer USB driver configuration # comment "USB Physical Layer drivers" - depends on USB + depends on USB || USB_GADGET config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" - depends on USB + depends on USB || USB_GADGET depends on I2C help Say Y here to add support for the NXP ISP1301 USB transceiver driver. -- 1.7.10 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
