Bjørn Mork <bjorn@xxxxxxx> writes: > But I did not get any response from the modem to neither icmp6 RS nor > DHCPv6 solicitations. Just looked in the mirror and noticed "stupid!" on my forehead... Do I filter RAs by default? Yes. Turns out the modem responds just fine to RS: Capturing on wwan1 0.000000 fe80::b82d:daff:fe84:a6ad -> ff02::2 ICMPv6 70 Router Solicitation 0.002199 fe80::d472:4f3:a6e5:c9f4 -> fe80::b82d:daff:fe84:a6ad ICMPv6 118 Router Advertisement 0.391954 :: -> ff02::1:ff84:a6ad ICMPv6 78 Neighbor Solicitation 5.002495 fe80::d472:4f3:a6e5:c9f4 -> ff02::1:ff84:a6ad ICMPv6 86 Neighbor Solicitation 5.002583 fe80::b82d:daff:fe84:a6ad -> fe80::d472:4f3:a6e5:c9f4 ICMPv6 86 Neighbor Advertisement 6.891973 fe80::b82d:daff:fe84:a6ad -> ff02::16 ICMPv6 90 Multicast Listener Report Message v2 10.011966 fe80::b82d:daff:fe84:a6ad -> fe80::d472:4f3:a6e5:c9f4 ICMPv6 86 Neighbor Solicitation 10.013089 fe80::d472:4f3:a6e5:c9f4 -> fe80::b82d:daff:fe84:a6ad ICMPv6 86 Neighbor Advertisement > We did manage to pick up the packets on the other end, but never > reveived any replies so the link was never fully functional. Which again seems to be the raw IP mode showing up. I send full ethernet headers and receive raw IPv6 packets with no L2 header: Capturing on wwan1 0.000000 3a:35:20:01:46:20 -> 60:00:00:00:00:40 LLC 104 I, N(R)=0, N(S)=0; DSAP NULL LSAP Individual, SSAP NULL LSAP Command 0.951998 2a02:2121:0:b:b82d:daff:fe84:a6ad -> 2001:4620:9::1 ICMPv6 118 Echo (ping) request id=0x7372, seq=92 1.004130 3a:35:20:01:46:20 -> 60:00:00:00:00:40 LLC 104 I, N(R)=0, N(S)=0; DSAP NULL LSAP Individual, SSAP NULL LSAP Command 1.895153 fe80::d472:4f3:a6e5:c9f4 -> ff02::1:ff84:a6ad ICMPv6 86 Neighbor Solicitation 1.895220 fe80::b82d:daff:fe84:a6ad -> fe80::d472:4f3:a6e5:c9f4 ICMPv6 86 Neighbor Advertisement 1.960414 2a02:2121:0:b:b82d:daff:fe84:a6ad -> 2001:4620:9::1 ICMPv6 118 Echo (ping) request id=0x7372, seq=93 2.008130 3a:35:20:01:46:20 -> 60:00:00:00:00:40 LLC 104 I, N(R)=0, N(S)=0; DSAP NULL LSAP Individual, SSAP NULL LSAP Command 2.967966 2a02:2121:0:b:b82d:daff:fe84:a6ad -> 2001:4620:9::1 ICMPv6 118 Echo (ping) request id=0x7372, seq=94 3.020153 3a:35:20:01:46:20 -> 60:00:00:00:00:40 LLC 104 I, N(R)=0, N(S)=0; DSAP NULL LSAP Individual, SSAP NULL LSAP Command Have to research further whether this can be turned off or if we need raw IP mode after all for IPv6 support. And I still haven't found out how to do a dual stack connection. The second QMI_WDS_START_NETWORK_INTERFACE fails with QMI_ERR_POLICY_MISMATCH Bjørn -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
