From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
When we run rmmod a gadget driver, the driver will call
disable_controller(). Then, because the bit of USBE in SYSCFG0 was
cleared in on_chip=1 mode, we could not connect the usb when we run
insmod a gadget driver next time.
This patch also cleans up probe() and ->stop() about unnecessary
init_controller().
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
drivers/usb/gadget/r8a66597-udc.c | 10 +++-------
1 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 7ee6915..4f3f1ce 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1444,6 +1444,7 @@ static int r8a66597_start(struct usb_gadget_driver *driver,
goto error;
}
+ init_controller(r8a66597);
r8a66597_bset(r8a66597, VBSE, INTENB0);
if (r8a66597_read(r8a66597, INTSTS0) & VBSTS) {
r8a66597_start_xclock(r8a66597);
@@ -1474,15 +1475,12 @@ static int r8a66597_stop(struct usb_gadget_driver *driver)
spin_lock_irqsave(&r8a66597->lock, flags);
if (r8a66597->gadget.speed != USB_SPEED_UNKNOWN)
r8a66597_usb_disconnect(r8a66597);
- spin_unlock_irqrestore(&r8a66597->lock, flags);
-
r8a66597_bclr(r8a66597, VBSE, INTENB0);
+ disable_controller(r8a66597);
+ spin_unlock_irqrestore(&r8a66597->lock, flags);
driver->unbind(&r8a66597->gadget);
- init_controller(r8a66597);
- disable_controller(r8a66597);
-
device_del(&r8a66597->gadget.dev);
r8a66597->driver = NULL;
return 0;
@@ -1646,8 +1644,6 @@ static int __init r8a66597_probe(struct platform_device *pdev)
goto clean_up3;
r8a66597->ep0_req->complete = nop_completion;
- init_controller(r8a66597);
-
ret = usb_add_gadget_udc(&pdev->dev, &r8a66597->gadget);
if (ret)
goto err_add_udc;
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
