Here's the big USB pull request for your 3.1 tree.
Note, there will be one conflict in the
Documentation/feature-removal-schedule.txt file, when you merge this,
but it's trivial to resolve.
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6.git/ usb-next
All of these patches have been in the linux-next and mm trees for a
number of weeks.
The full patches will be sent to the linux-usb mailing list, if anyone
wants to see them.
thanks,
greg k-h
------------
Documentation/ABI/testing/sysfs-module | 23 +
Documentation/feature-removal-schedule.txt | 7 +
Documentation/kernel-parameters.txt | 5 +
Documentation/usb/ehci.txt | 2 +
Documentation/usb/gadget_hid.txt | 6 +-
arch/arm/mach-omap2/usb-musb.c | 10 -
drivers/usb/atm/ueagle-atm.c | 38 +-
drivers/usb/atm/usbatm.c | 4 +-
drivers/usb/class/usblp.c | 7 +-
drivers/usb/core/hcd.c | 17 +-
drivers/usb/gadget/Kconfig | 313 +---
drivers/usb/gadget/Makefile | 2 +
drivers/usb/gadget/amd5536udc.c | 18 +-
drivers/usb/gadget/at91_udc.c | 20 +-
drivers/usb/gadget/atmel_usba_udc.c | 26 +-
drivers/usb/gadget/audio.c | 1 +
drivers/usb/gadget/cdc2.c | 1 +
drivers/usb/gadget/ci13xxx_msm.c | 1 +
drivers/usb/gadget/ci13xxx_udc.c | 62 +-
drivers/usb/gadget/composite.c | 363 ++++-
drivers/usb/gadget/config.c | 25 -
drivers/usb/gadget/dbgp.c | 10 +-
drivers/usb/gadget/dummy_hcd.c | 1160 ++++++++----
drivers/usb/gadget/epautoconf.c | 132 ++-
drivers/usb/gadget/ether.c | 1 +
drivers/usb/gadget/f_acm.c | 50 +-
drivers/usb/gadget/f_audio.c | 5 +-
drivers/usb/gadget/f_ecm.c | 152 ++-
drivers/usb/gadget/f_eem.c | 90 +-
drivers/usb/gadget/f_fs.c | 3 +-
drivers/usb/gadget/f_hid.c | 22 +-
drivers/usb/gadget/f_loopback.c | 72 +-
drivers/usb/gadget/f_mass_storage.c | 33 +-
drivers/usb/gadget/f_ncm.c | 58 +-
drivers/usb/gadget/f_obex.c | 32 +-
drivers/usb/gadget/f_phonet.c | 17 +-
drivers/usb/gadget/f_rndis.c | 151 ++-
drivers/usb/gadget/f_serial.c | 32 +-
drivers/usb/gadget/f_sourcesink.c | 71 +-
drivers/usb/gadget/f_subset.c | 95 +-
drivers/usb/gadget/f_uvc.c | 8 +-
drivers/usb/gadget/file_storage.c | 15 +-
drivers/usb/gadget/fsl_qe_udc.c | 20 +-
drivers/usb/gadget/fsl_udc_core.c | 20 +-
drivers/usb/gadget/fusb300_udc.c | 111 +-
drivers/usb/gadget/g_ffs.c | 1 +
drivers/usb/gadget/gadget_chips.h | 178 +--
drivers/usb/gadget/gmidi.c | 9 +-
drivers/usb/gadget/goku_udc.c | 19 +-
drivers/usb/gadget/hid.c | 1 +
drivers/usb/gadget/imx_udc.c | 20 +-
drivers/usb/gadget/inode.c | 11 +-
drivers/usb/gadget/langwell_udc.c | 32 +-
drivers/usb/gadget/m66592-udc.c | 62 +-
drivers/usb/gadget/m66592-udc.h | 40 +-
drivers/usb/gadget/mass_storage.c | 1 +
drivers/usb/gadget/multi.c | 1 +
drivers/usb/gadget/mv_udc_core.c | 21 +-
drivers/usb/gadget/ncm.c | 1 +
drivers/usb/gadget/net2272.c | 2752 ++++++++++++++++++++++++++++
drivers/usb/gadget/net2272.h | 601 ++++++
drivers/usb/gadget/net2280.c | 74 +-
drivers/usb/gadget/nokia.c | 1 +
drivers/usb/gadget/omap_udc.c | 22 +-
drivers/usb/gadget/pch_udc.c | 16 +-
drivers/usb/gadget/printer.c | 40 +-
drivers/usb/gadget/pxa25x_udc.c | 19 +-
drivers/usb/gadget/pxa27x_udc.c | 23 +-
drivers/usb/gadget/r8a66597-udc.c | 71 +-
drivers/usb/gadget/r8a66597-udc.h | 2 +-
drivers/usb/gadget/s3c-hsotg.c | 19 +-
drivers/usb/gadget/s3c-hsudc.c | 17 +-
drivers/usb/gadget/s3c2410_udc.c | 60 +-
drivers/usb/gadget/serial.c | 1 +
drivers/usb/gadget/storage_common.c | 2 +-
drivers/usb/gadget/u_ether.c | 24 +-
drivers/usb/gadget/u_ether.h | 4 -
drivers/usb/gadget/u_serial.c | 4 +-
drivers/usb/gadget/u_serial.h | 2 -
drivers/usb/gadget/udc-core.c | 484 +++++
drivers/usb/gadget/webcam.c | 1 +
drivers/usb/gadget/zero.c | 1 +
drivers/usb/host/ehci-hcd.c | 21 +-
drivers/usb/host/ehci-hub.c | 78 +-
drivers/usb/host/ehci-msm.c | 20 +-
drivers/usb/host/ehci-q.c | 85 +-
drivers/usb/host/ehci-s5p.c | 95 +
drivers/usb/host/ehci-sched.c | 17 +-
drivers/usb/host/ehci-sysfs.c | 190 ++
drivers/usb/host/ehci.h | 6 +-
drivers/usb/host/ohci-sh.c | 2 +-
drivers/usb/host/pci-quirks.c | 56 +-
drivers/usb/host/r8a66597-hcd.c | 6 +-
drivers/usb/host/r8a66597.h | 38 +-
drivers/usb/host/xhci-dbg.c | 22 +-
drivers/usb/host/xhci-mem.c | 26 +-
drivers/usb/host/xhci-ring.c | 42 +-
drivers/usb/host/xhci.c | 10 +-
drivers/usb/host/xhci.h | 7 +
drivers/usb/mon/mon_text.c | 9 +-
drivers/usb/musb/Kconfig | 75 +-
drivers/usb/musb/Makefile | 4 +-
drivers/usb/musb/am35x.c | 4 -
drivers/usb/musb/blackfin.h | 2 +-
drivers/usb/musb/da8xx.c | 12 +-
drivers/usb/musb/davinci.c | 5 -
drivers/usb/musb/musb_core.c | 133 +-
drivers/usb/musb/musb_core.h | 70 +-
drivers/usb/musb/musb_gadget.c | 102 +-
drivers/usb/musb/musb_gadget_ep0.c | 4 -
drivers/usb/musb/musb_host.h | 4 -
drivers/usb/musb/musb_virthub.c | 6 -
drivers/usb/musb/omap2430.c | 15 +-
drivers/usb/musb/tusb6010.c | 26 +-
drivers/usb/otg/twl6030-usb.c | 30 +-
drivers/usb/renesas_usbhs/Kconfig | 13 +-
drivers/usb/renesas_usbhs/Makefile | 2 +-
drivers/usb/renesas_usbhs/common.c | 34 +-
drivers/usb/renesas_usbhs/common.h | 44 +
drivers/usb/renesas_usbhs/fifo.c | 1015 ++++++++++
drivers/usb/renesas_usbhs/fifo.h | 104 ++
drivers/usb/renesas_usbhs/mod_gadget.c | 840 +++-------
drivers/usb/renesas_usbhs/pipe.c | 298 +---
drivers/usb/renesas_usbhs/pipe.h | 47 +-
drivers/usb/serial/pl2303.c | 27 +-
drivers/usb/serial/pl2303.h | 4 +
drivers/usb/storage/Kconfig | 4 +
drivers/usb/storage/realtek_cr.c | 490 +++++-
drivers/usb/wusbcore/cbaf.c | 4 +-
drivers/usb/wusbcore/wa-xfer.c | 7 +-
include/linux/usb/composite.h | 32 +-
include/linux/usb/gadget.h | 88 +-
include/linux/usb/m66592.h | 2 +
include/linux/usb/r8a66597.h | 8 +-
include/linux/usb/renesas_usbhs.h | 17 +
135 files changed, 9084 insertions(+), 3166 deletions(-)
create mode 100644 drivers/usb/gadget/net2272.c
create mode 100644 drivers/usb/gadget/net2272.h
create mode 100644 drivers/usb/gadget/udc-core.c
create mode 100644 drivers/usb/host/ehci-sysfs.c
create mode 100644 drivers/usb/renesas_usbhs/fifo.c
create mode 100644 drivers/usb/renesas_usbhs/fifo.h
---------------
Ajay Kumar Gupta (1):
usb: musb: restore INDEX register in resume path
Alan Stern (4):
USB: deprecate g_file_storage
USB: EHCI: go back to using the system clock for QH unlinks
USB: OHCI: fix another regression for NVIDIA controllers
EHCI: fix direction handling for interrupt data toggles
Amit Blay (1):
usb: gadget: zero: add superspeed support
Anisse Astier (2):
ehci: refactor pci quirk to use standard dmi_check_system method
ehci: add pci quirk for Ordissimo and RM Slate 100 too
Bob Liu (1):
USB: gadget: fix req length in sourcesink_setup()
Carl-Daniel Hailfinger (1):
USB: Add "authorized_default" parameter to the usbcore module
Chris Forbes (2):
drivers: usb: atm: ueagle-atm: use __packed
drivers: usb: atm: ueagle-atm: Add missing const qualifier
Dan Carpenter (1):
USB: wusbcore: return negative error codes
Felipe Balbi (12):
usb: gadget: introduce UDC Class
usb: gadget: ci13xx_udc: fix usb_ep_enable() call
usb: gadget: chips: remove ifdef trickery
usb: musb: be careful when using different fifo_modes
usb: musb: drop a gigantic amount of ifdeferry
usb: musb: choose correct fifo_mode
usb: gadget: allow multiple gadgets to be built
usb: musb: omap: always create musb device
usb: musb: no need to access platform_device
usb: gadget: fusb300_udc: drop dead code
usb: gadget: langwell_udc: fix compile warnings
usb: gadget: net2272: fix compile warnings
Guenter Roeck (1):
usb/gadget: (fusb300_udc) Remove unused function fusb300_ep0_complete
Jassi Brar (1):
USB: Gadget: Webcam: Return correct result of bind
Jingoo Han (1):
USB: ehci-s5p: add PM support
Kirill Smelkov (2):
USB: EHCI: Move sysfs related bits into ehci-sysfs.c
USB: EHCI: Allow users to override 80% max periodic bandwidth
Kuninori Morimoto (22):
usb: renesas_usbhs: modify pipe direction flags
usb: renesas_usbhs: fifo became independent from pipe.
usb: renesas_usbhs: divide data transfer functions
usb: renesas_usbhs: modify packet queue control method
usb: renesas_usbhs: modify data transfer method
usb: renesas_usbhs: modify data transfer interrupt
usb: renesas_usbhs: remove usbhsg_queue_get
usb: renesas_usbhs: shrink spin lock area
usb: renesas_usbhs: add usbhsf_fifo
usb: renesas_usbhs: add pipe/fifo link
usb: renesas_usbhs: tifyup packet start timing
usb: renesas_usbhs: tidyup pio handler name
usb: renesas_usbhs: add DMAEngine support
usb: renesas_usbhs: fixup connection fail
usb: renesas_usbhs: put obtained dma channel info to debug message
usb: renesas_usbhs: use dma handler
usb: renesas_usbhs: fixup comment-out
usb: renesas_usbhs: compile/config are rescued
usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift
usb: renesas_usbhs: care buff alignment when dma handler
usb: renesas_usbhs: inaccessible pipe is not an error
usb: renesas_usbhs: support multi driver
Manuel Zerpies (3):
usb/class: use printk_ratelimited() instead of printk_ratelimit()
wusb: use printk_ratelimited() instead of printk_ratelimit()
drivers/usb/atm: use printk_ratelimited() instead of printk_ratelimit()
Mark Brown (1):
USB: gadget.h depends on ch9.h so include ch9.h directly
Matt Evans (1):
xhci: Remove some unnecessary casts and tidy some endian swap code
Matthieu CASTET (1):
ehci-msm : use ehci_setup
Michał Sroczyński (1):
USB: PL2303: correctly handle baudrates above 115200
Mike Frysinger (1):
usb: musb: update musb_platform_ops docs to match code
Moiz Sonasath (1):
USB: OTG: Use work_queue in set_vbus for TWL6030 transciever
Niels de Vos (1):
ehci-hcd: remove EOL from MODULE_PARM_DESC for 'hird' option
Paul Zimmerman (1):
usb: gadget: add SS descriptors to Ethernet gadget
Sebastian Andrzej Siewior (21):
usb: gadget: convert all users to the new udc infrastructure
usb: gadget: net2272: cleanup pci_register_driver() error path
usb: gadget: add platform module alias where it is missing
usb: gadget: s3c2410_udc: use platform ids instead
usb: gadget: dummy_hcd: use dummy_pullup() instead of open coding
usb: gadget: dummy_hcd: set gadget.is_otg before calling bind()
usb: gadget: dummy_hcd: use gadget_to_dummy_hcd() where possible
usb: gadget: dummy_hcd: use less checks for USB_SPEED_SUPER
usb: gadget: remove net2280_set_fifo_mode()
usb: gadget: dummy_hcd: move common bits of suspend/resume into one function
usb: gadget: defer setting maxpacket till ->setup()
usb: gadget: dummy_hcd: move ep initialisation HW setup
usb: gadget: dummy_hcd: init is_otg in init_dummy_udc_hw()
usb: gadget: dummy_hcd: move selection of speed into ->pullup()
usb: gadget: udc-core: add "new-style" registration interface
usb: musb: convert musb to new style bind
usb: gadget: dummy_hcd: convert to new-style udc-probe
usb: gadget: udc-core: wire up sysfs files
usb: gadget: ci13xx_udc.c: fix compile warning
usb: gadget: fusb300_udc: fix compile warnings
usb: gadget: fix up depencies
Sergei Shtylyov (2):
usb: gadget: add missing #include's
EHCI: only power off port if over-current is active
Seth Levy (1):
USB: net2272: driver for PLX NET2272 USB device controller
Tatyana Brokhman (11):
usb: gadget: add usb_endpoint_descriptor to struct usb_ep
usb: gadget: configure endpoint according to gadget speed
usb: gadget: use config_ep_by_speed() instead of ep_choose()
usb: gadget: coding style fix
usb: gadget: add streams support to the gadget framework
usb: gadget: add max_speed to usb_composite_driver
usb: gadget: add SuperSpeed support to the Gadget Framework
usb: gadget: dummy_hcd: use the shared_hcd infrastructure
usb: gadget: dummy_hcd: add SuperSpeed support
usb: gadget: dummy_hcd: add 'is_high_speed' parameter
usb: gadget: Compilation warning fix
Tobias Klauser (2):
USB: Documentation: Use correct character in gadget_hid.txt
USB: mon: Allow to use usbmon without debugfs
Viliam Mateicka (1):
USB: s3c2410_udc: fix custom UDC command handling
Wolfgang Denk (1):
USB: serial: add IDs for WinChipHead USB->RS232 adapter
Yoshihiro Shimoda (10):
usb: update email address in r8a66597-udc and m66592-udc
usb: gadget: r8a66597-udc: fix cannot connect after rmmod gadget driver
usb: gadget: r8a66597-udc: Make BUSWAIT configurable through platform data
usb: gadget: m66592-udc: add support for TEST_MODE
usb: gadget: r8a66597-udc: add support for TEST_MODE
usb: r8a66597-hcd: add function for external controller
usb: update email address in ohci-sh and r8a66597-hcd
usb: gadget: r8a66597-udc: add pullup function
usb: gadget: m66592-udc: add function for external controller
usb: gadget: m66592-udc: add pullup function
edwin_rong (3):
Realtek cr: clean up unnecessary whitespaces.
Realtek cr: Remove unused Macros
Realtek cr: Add autosuspend function.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
