On Jun 27, 2011, at 11:12 AM, Sarah Sharp wrote: > On Mon, Jun 27, 2011 at 08:30:16AM -0500, M. Steven Ginn wrote: >> Sarah, >> >> attached is the log.txt file >> >> I ran the command you gave below >> then umounted my sata raid tower drives (sdc1, sdd2, sde2 & sdf1) >> then disconnected the esata cable from the computer and plugged it into the Addonics USB 3.0 to esata connection >> then plugged it in to the USB 3.0 port and determined that the drives aren't recognized by running gparted >> then disconnected the Addonics device and reconnected the esata back to the system >> stopped the log > > Thanks Steve. However, since Alan pointed out it's probably an issue > with a higher layer (e.g. the SCSI layer), I'm not sure if there's > anything in this log that's useful. I'll give it a quick look over > though later today. > > Sarah Sharp > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html Ok … in the mean time, I will post the output of usbmon to see if that provides additional help. What I find interesting though is that I am experiencing no problems with my direct esata connection to the tower. thanks, Steve sginn@xxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
