On Thu, Jan 13, 2011 at 6:04 PM, Greg KH <greg@xxxxxxxxx> wrote: > Hm, maybe something that modemmanager could handle for you? ÂHave you > asked the developers of that program about this? I have not checked with them. I am running on an embedded device with limited flash space. I do not have a full distribution install of utilities. > Try the ethernet connection, hopefully that would be the best way to > talk to the modem, and is the way that most devices are going in the > future. I still need the AT port to talk to the device to establish the network connection. > If neither of these work out, we can write a simple usb-serial driver > that exposes the individual endpoints as tty devices but even then, you > will have to work with modemmanager to properly tie it in and get it to > work properly. The ethernet device did not appear to be working properly which is why I was looking to try a ppp connection. I could establish a network connection and query the ip address of the ethernet interface from the AT port but I could never get any traffic to go over the ethernet interface. Thanks, Brian -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
