From: Michal Nazarewicz <mina86@xxxxxxxxxx>
This commit changes prefix for USB mass storage class
related macros (ie. USB_SC_ for subclass and USB_PR_ for
class).
Signed-off-by: Michal Nazarewicz <mina86@xxxxxxxxxx>
---
drivers/block/ub.c | 2 +-
drivers/staging/keucr/scsiglue.c | 6 +-
drivers/staging/keucr/transport.c | 4 +-
drivers/staging/keucr/usb.c | 8 +-
drivers/usb/storage/scsiglue.c | 8 +-
drivers/usb/storage/sddr09.c | 2 +-
drivers/usb/storage/transport.c | 10 +-
drivers/usb/storage/unusual_alauda.h | 4 +-
drivers/usb/storage/unusual_cypress.h | 4 +-
drivers/usb/storage/unusual_datafab.h | 20 +-
drivers/usb/storage/unusual_devs.h | 572 ++++++++++++++++----------------
drivers/usb/storage/unusual_freecom.h | 2 +-
drivers/usb/storage/unusual_isd200.h | 12 +-
drivers/usb/storage/unusual_jumpshot.h | 2 +-
drivers/usb/storage/unusual_karma.h | 2 +-
drivers/usb/storage/unusual_onetouch.h | 4 +-
drivers/usb/storage/unusual_sddr09.h | 12 +-
drivers/usb/storage/unusual_sddr55.h | 8 +-
drivers/usb/storage/unusual_usbat.h | 8 +-
drivers/usb/storage/usb.c | 30 +-
include/linux/usb/storage.h | 54 ++--
21 files changed, 387 insertions(+), 387 deletions(-)
> On Tue, Sep 28, 2010 at 12:55:32PM +0200, Michal Nazarewicz wrote:
>> This commit changes storage_common.c and file_storage.c to
>> reuse definitions from linux/usb/storage.h header file.
Matthew Wilcox <willy@xxxxxxxxxxxxxxx> writes:
> The only thing is that I like your names better than I like the libusual
> names. I didn't change the libusual names because I didn't want to make
> a big patch. So instead of this patch, could we add your names to the
> usb/storage.h header file, and then convert libusual to use your names?
Fine by me. I'm Ccing some more addresses in case someone doesn't like the
idea.
Attached is patch that does exactly that. Done with:
find -name '*.[ch]' -exec \
perl -i -pe 's/\bUS_(SC|PR)_/USB_${1}_/g' {} +
(Maybe it'd be better to squash it with your patch thoug?)
The patch that follows this one is an updated patch for gadget.
>> @@ -157,19 +158,6 @@
>> #define TYPE_DISK 0x00
>> #define TYPE_CDROM 0x05
> These look suspiciously like definitions available in
> include/scsi/scsi.h
Nice. I knew those have to be somewhere but I couldn't find them
anywhere... I'll try to work on those as well (storage_common.c has
a whole bunch of SCSI definitions).
>> @@ -408,8 +396,8 @@ fsg_intf_desc = {
>>
>> .bNumEndpoints = 2, /* Adjusted during fsg_bind() */
>> .bInterfaceClass = USB_CLASS_MASS_STORAGE,
>> - .bInterfaceSubClass = USB_SC_SCSI, /* Adjusted during fsg_bind() */
>> - .bInterfaceProtocol = USB_PR_BULK, /* Adjusted during fsg_bind() */
>> + .bInterfaceSubClass = US_SC_SCSI, /* Adjusted during fsg_bind() */
>> + .bInterfaceProtocol = US_PR_BULK, /* Adjusted during fsg_bind() */
>> .iInterface = FSG_STRING_INTERFACE,
> Would you (or anybody else) be interested in adding UAS support to the
> gadget driver? It'd be cool to have another device available. I'd be
> interested in helping / advising. I don't know if there are any USB 3
> gadgets available right now, but we could implement the USB 2 version
> of the protocol.
Unfortunately, I won't be able to squeeze it into my overly large TODO
list.
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index b5690a0..9ae3bb7 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -397,7 +397,7 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum);
#else
static const struct usb_device_id ub_usb_ids[] = {
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) },
+ { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
{ }
};
diff --git a/drivers/staging/keucr/scsiglue.c b/drivers/staging/keucr/scsiglue.c
index d830348..a267140 100644
--- a/drivers/staging/keucr/scsiglue.c
+++ b/drivers/staging/keucr/scsiglue.c
@@ -30,7 +30,7 @@ static int slave_alloc(struct scsi_device *sdev)
blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
- if (us->subclass == US_SC_UFI)
+ if (us->subclass == USB_SC_UFI)
sdev->sdev_target->pdt_1f_for_no_lun = 1;
return 0;
@@ -55,7 +55,7 @@ static int slave_configure(struct scsi_device *sdev)
if (sdev->type == TYPE_DISK)
{
- if (us->subclass != US_SC_SCSI && us->subclass != US_SC_CYP_ATACB)
+ if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
sdev->use_10_for_ms = 1;
sdev->use_192_bytes_for_3f = 1;
if (us->fflags & US_FL_NO_WP_DETECT)
@@ -76,7 +76,7 @@ static int slave_configure(struct scsi_device *sdev)
sdev->use_10_for_ms = 1;
}
- if ((us->protocol == US_PR_CB || us->protocol == US_PR_CBI) && sdev->scsi_level == SCSI_UNKNOWN)
+ if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) && sdev->scsi_level == SCSI_UNKNOWN)
us->max_lun = 0;
if (us->fflags & US_FL_NOT_LOCKABLE)
diff --git a/drivers/staging/keucr/transport.c b/drivers/staging/keucr/transport.c
index 7215429..e033fcb 100644
--- a/drivers/staging/keucr/transport.c
+++ b/drivers/staging/keucr/transport.c
@@ -315,7 +315,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
/* Determine if we need to auto-sense */
need_auto_sense = 0;
- if ((us->protocol == US_PR_CB || us->protocol == US_PR_DPCM_USB) && srb->sc_data_direction != DMA_FROM_DEVICE)
+ if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_DPCM_USB) && srb->sc_data_direction != DMA_FROM_DEVICE)
{
//printk("-- CB transport device requiring auto-sense\n");
need_auto_sense = 1;
@@ -338,7 +338,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
scsi_eh_prep_cmnd(srb, &ses, NULL, 0, US_SENSE_SIZE);
/* we must do the protocol translation here */
- if (us->subclass == US_SC_RBC || us->subclass == US_SC_SCSI || us->subclass == US_SC_CYP_ATACB)
+ if (us->subclass == USB_SC_RBC || us->subclass == USB_SC_SCSI || us->subclass == USB_SC_CYP_ATACB)
srb->cmd_len = 6;
else
srb->cmd_len = 12;
diff --git a/drivers/staging/keucr/usb.c b/drivers/staging/keucr/usb.c
index 606053d..c65b988 100644
--- a/drivers/staging/keucr/usb.c
+++ b/drivers/staging/keucr/usb.c
@@ -343,7 +343,7 @@ static int get_transport(struct us_data *us)
{
printk("usb --- get_transport\n");
switch (us->protocol) {
- case US_PR_BULK:
+ case USB_PR_BULK:
us->transport_name = "Bulk";
us->transport = usb_stor_Bulk_transport;
us->transport_reset = usb_stor_Bulk_reset;
@@ -367,7 +367,7 @@ static int get_protocol(struct us_data *us)
printk("us->pusb_dev->descriptor.idVendor = %x\n", us->pusb_dev->descriptor.idVendor);
printk("us->pusb_dev->descriptor.idProduct = %x\n", us->pusb_dev->descriptor.idProduct);
switch (us->subclass) {
- case US_SC_SCSI:
+ case USB_SC_SCSI:
us->protocol_name = "Transparent SCSI";
if( (us->pusb_dev->descriptor.idVendor == 0x0CF2) && (us->pusb_dev->descriptor.idProduct == 0x6250) )
us->proto_handler = ENE_stor_invoke_transport;
@@ -418,7 +418,7 @@ static int get_pipes(struct us_data *us)
}
}
- if (!ep_in || !ep_out || (us->protocol == US_PR_CBI && !ep_int))
+ if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int))
{
printk("Endpoint sanity check failed! Rejecting dev.\n");
return -EIO;
@@ -564,7 +564,7 @@ static int usb_stor_scan_thread(void * __us)
if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags))
{
/* For bulk-only devices, determine the max LUN value */
- if (us->protocol == US_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN))
+ if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN))
{
mutex_lock(&us->dev_mutex);
us->max_lun = usb_stor_Bulk_max_lun(us);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index d8d98cf..e80362d 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -113,7 +113,7 @@ static int slave_alloc (struct scsi_device *sdev)
* Let the scanning code know if this target merely sets
* Peripheral Device Type to 0x1f to indicate no LUN.
*/
- if (us->subclass == US_SC_UFI)
+ if (us->subclass == USB_SC_UFI)
sdev->sdev_target->pdt_1f_for_no_lun = 1;
return 0;
@@ -176,7 +176,7 @@ static int slave_configure(struct scsi_device *sdev)
/* Disk-type devices use MODE SENSE(6) if the protocol
* (SubClass) is Transparent SCSI, otherwise they use
* MODE SENSE(10). */
- if (us->subclass != US_SC_SCSI && us->subclass != US_SC_CYP_ATACB)
+ if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
sdev->use_10_for_ms = 1;
/* Many disks only accept MODE SENSE transfer lengths of
@@ -245,7 +245,7 @@ static int slave_configure(struct scsi_device *sdev)
* capacity will be decremented or is correct. */
if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
US_FL_SCM_MULT_TARG)) &&
- us->protocol == US_PR_BULK)
+ us->protocol == USB_PR_BULK)
us->use_last_sector_hacks = 1;
} else {
@@ -261,7 +261,7 @@ static int slave_configure(struct scsi_device *sdev)
* scsi_level == 0 (UNKNOWN). Hence such devices must necessarily
* be single-LUN.
*/
- if ((us->protocol == US_PR_CB || us->protocol == US_PR_CBI) &&
+ if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) &&
sdev->scsi_level == SCSI_UNKNOWN)
us->max_lun = 0;
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index ab5f9f3..bcb9a70 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -1760,7 +1760,7 @@ static int sddr09_probe(struct usb_interface *intf,
if (result)
return result;
- if (us->protocol == US_PR_DPCM_USB) {
+ if (us->protocol == USB_PR_DPCM_USB) {
us->transport_name = "Control/Bulk-EUSB/SDDR09";
us->transport = dpcm_transport;
us->transport_reset = usb_stor_CB_reset;
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 64ec073..0041899 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -642,7 +642,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
* unless the operation involved a data-in transfer. Devices
* can signal most data-in errors by stalling the bulk-in pipe.
*/
- if ((us->protocol == US_PR_CB || us->protocol == US_PR_DPCM_USB) &&
+ if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_DPCM_USB) &&
srb->sc_data_direction != DMA_FROM_DEVICE) {
US_DEBUGP("-- CB transport device requiring auto-sense\n");
need_auto_sense = 1;
@@ -701,8 +701,8 @@ Retry_Sense:
scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size);
/* FIXME: we must do the protocol translation here */
- if (us->subclass == US_SC_RBC || us->subclass == US_SC_SCSI ||
- us->subclass == US_SC_CYP_ATACB)
+ if (us->subclass == USB_SC_RBC || us->subclass == USB_SC_SCSI ||
+ us->subclass == USB_SC_CYP_ATACB)
srb->cmd_len = 6;
else
srb->cmd_len = 12;
@@ -926,7 +926,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
/* NOTE: CB does not have a status stage. Silly, I know. So
* we have to catch this at a higher level.
*/
- if (us->protocol != US_PR_CBI)
+ if (us->protocol != USB_PR_CBI)
return USB_STOR_TRANSPORT_GOOD;
result = usb_stor_intr_transfer(us, us->iobuf, 2);
@@ -942,7 +942,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
* that this means we could be ignoring a real error on these
* commands, but that can't be helped.
*/
- if (us->subclass == US_SC_UFI) {
+ if (us->subclass == USB_SC_UFI) {
if (srb->cmnd[0] == REQUEST_SENSE ||
srb->cmnd[0] == INQUIRY)
return USB_STOR_TRANSPORT_GOOD;
diff --git a/drivers/usb/storage/unusual_alauda.h b/drivers/usb/storage/unusual_alauda.h
index 8c412f8..fa3e9ed 100644
--- a/drivers/usb/storage/unusual_alauda.h
+++ b/drivers/usb/storage/unusual_alauda.h
@@ -21,11 +21,11 @@
UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102,
"Fujifilm",
"DPC-R1 (Alauda)",
- US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
+ USB_SC_SCSI, USB_PR_ALAUDA, init_alauda, 0),
UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102,
"Olympus",
"MAUSB-10 (Alauda)",
- US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
+ USB_SC_SCSI, USB_PR_ALAUDA, init_alauda, 0),
#endif /* defined(CONFIG_USB_STORAGE_ALAUDA) || ... */
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
index 44be6d7..c854fde 100644
--- a/drivers/usb/storage/unusual_cypress.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -23,12 +23,12 @@
UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999,
"Cypress",
"Cypress AT2LP",
- US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
+ USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
/* CY7C68310 : support atacb and atacb2 */
UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999,
"Cypress",
"Cypress ISD-300LP",
- US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
+ USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
#endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */
diff --git a/drivers/usb/storage/unusual_datafab.h b/drivers/usb/storage/unusual_datafab.h
index c9298ce..582a603 100644
--- a/drivers/usb/storage/unusual_datafab.h
+++ b/drivers/usb/storage/unusual_datafab.h
@@ -21,7 +21,7 @@
UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015,
"Datafab",
"MDCFE-B USB CF Reader",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
/*
@@ -38,45 +38,45 @@ UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015,
UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
"SIIG/Datafab",
"SIIG/Datafab Memory Stick+CF Reader/Writer",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
/* Reported by Josef Reisinger <josef.reisinger@xxxxxxxxxxxxx> */
UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
"Datafab/Unknown",
"MD2/MD3 Disk enclosure",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
US_FL_SINGLE_LUN),
UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
"Datafab/Unknown",
"Datafab-based Reader",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
"Datafab/Unknown",
"Datafab-based Reader",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
"PNY/Datafab",
"PNY/Datafab CF+SM Reader",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
"Simple Tech/Datafab",
"Simple Tech/Datafab CF+SM Reader",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
/* Submitted by Olaf Hering <olh@xxxxxxx> */
UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
"Datafab Systems, Inc.",
"USB to CF + SM Combo (LC1)",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
/* Reported by Felix Moeller <felix@xxxxxxxxxxxx>
@@ -86,13 +86,13 @@ UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
UNUSUAL_DEV( 0x07c4, 0xa10b, 0x0000, 0xffff,
"DataFab Systems Inc.",
"USB CF+MS",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
"Acomdata",
"CF",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
US_FL_SINGLE_LUN),
#endif /* defined(CONFIG_USB_STORAGE_DATAFAB) || ... */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 2c897ee..0c17c78 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -63,26 +63,26 @@
UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100,
"ATMEL",
"SND1 Storage",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE),
/* Reported by Rodolfo Quesada <rquesada@xxxxxxxx> */
UNUSUAL_DEV( 0x03ee, 0x6906, 0x0003, 0x0003,
"VIA Technologies Inc.",
"Mitsumi multi cardreader",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200,
"HP",
"CD-Writer+",
- US_SC_8070, US_PR_CB, NULL, 0),
+ USB_SC_8070, USB_PR_CB, NULL, 0),
/* Reported by Ben Efros <ben@xxxxxxxxxxxxx> */
UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000,
"HP",
"Personal Media Drive",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SANE_SENSE ),
/* Reported by Grant Grundler <grundler@xxxxxxxxxxxxxxxx>
@@ -91,7 +91,7 @@ UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000,
UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001,
"HP",
"PhotoSmart R707",
- US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
/* Reported by Sebastian Kapfer <sebastian_kapfer@xxxxxxx>
* and Olaf Hering <olh@xxxxxxx> (different bcd's, same vendor/product)
@@ -100,14 +100,14 @@ UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001,
UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999,
"NEC",
"NEC USB UF000x",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Patch submitted by Mihnea-Costin Grigore <mihnea@xxxxxxx> */
UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003,
"VIA Technologies Inc.",
"USB 2.0 Card Reader",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Deduced by Jonathan Woithe <jwoithe@xxxxxxxxxxxxxxxxxxxxxxx>
@@ -117,40 +117,40 @@ UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003,
UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113,
"Buffalo",
"DUB-P40G HDD",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* Submitted by Ernestas Vaiciukevicius <ernisv@xxxxxxxxx> */
UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100,
"Samsung Info. Systems America, Inc.",
"MP3 Player",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Orgad Shaneh <orgads@xxxxxxxxx> */
UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100,
"Samsung", "MP3 Player",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Christian Leber <christian@xxxxxxxx> */
UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100,
"TrekStor",
"i.Beat 115 2.0",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ),
/* Reported by Stefan Werner <dustbln@xxxxxx> */
UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100,
"TrekStor",
"i.Beat Joy 2.0",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Pete Zaitcev <zaitcev@xxxxxxxxxx>, bz#176584 */
UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100,
"GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Andrew Nayenko <relan@xxxxx>
@@ -158,28 +158,28 @@ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100,
UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610,
"Nokia",
"Nokia 6288",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/* Reported by Mario Rettig <mariorettig@xxxxxx> */
UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100,
"Nokia",
"Nokia 3250",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by <honkkis@xxxxxxxxx> */
UNUSUAL_DEV( 0x0421, 0x0433, 0x0100, 0x0100,
"Nokia",
"E70",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by Jon Hart <Jon.Hart@xxxxxx> */
UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100,
"Nokia",
"E60",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
/* Reported by Sumedha Swamy <sumedhaswamy@xxxxxxxxx> and
@@ -187,7 +187,7 @@ UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100,
UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100,
"Nokia",
"N91",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by Jiri Slaby <jirislaby@xxxxxxxxx> and
@@ -195,42 +195,42 @@ UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100,
UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100,
"Nokia",
"N80",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by Matthew Bloch <matthew@xxxxxxxxxxxxxx> */
UNUSUAL_DEV( 0x0421, 0x044e, 0x0100, 0x0100,
"Nokia",
"E61",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by Bardur Arantsson <bardur@xxxxxxxxxxxxxxx> */
UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0610,
"Nokia",
"6131",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/* Reported by Manuel Osdoba <manuel.osdoba@xxxxxxxxxxxxx> */
UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999,
"Nokia",
"Nokia 6233",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/* Reported by Alex Corcoles <alex@xxxxxxxxxxxx> */
UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370,
"Nokia",
"6234",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
#ifdef NO_SDDR09
UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
"Microtech",
"CameraMate",
- US_SC_SCSI, US_PR_CB, NULL,
+ USB_SC_SCSI, USB_PR_CB, NULL,
US_FL_SINGLE_LUN ),
#endif
@@ -239,7 +239,7 @@ UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100,
"Neuros Audio",
"USB 2.0 HD 2.5",
- US_SC_DEVICE, US_PR_BULK, NULL,
+ USB_SC_DEVICE, USB_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
/*
@@ -250,7 +250,7 @@ UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100,
UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100,
"USBest Technology", /* sold by Transcend */
"USB Mass Storage Device",
- US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
/*
* Bohdan Linda <bohdan.linda@xxxxxxxxx>
@@ -260,7 +260,7 @@ UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100,
UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100,
"USB 2.0",
"Flash Disk",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NOT_LOCKABLE ),
/* Reported by Tamas Kerecsen <kerecsen@xxxxxxxxxxx>
@@ -272,7 +272,7 @@ UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100,
UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000,
"Mitac",
"GPS",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/*
@@ -284,32 +284,32 @@ UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000,
UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100,
"AMI",
"Virtual Floppy",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT),
/* Patch submitted by Philipp Friedrich <philipp@xxxxxxx> */
UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
"Kyocera",
"Finecam S3x",
- US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
+ USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
/* Patch submitted by Philipp Friedrich <philipp@xxxxxxx> */
UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100,
"Kyocera",
"Finecam S4",
- US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
+ USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
/* Patch submitted by Stephane Galles <stephane.galles@xxxxxxx> */
UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100,
"Kyocera",
"Finecam S5",
- US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
/* Patch submitted by Jens Taprogge <jens.taprogge@xxxxxxxxxxxx> */
UNUSUAL_DEV( 0x0482, 0x0107, 0x0100, 0x0100,
"Kyocera",
"CONTAX SL300R T*",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE),
/* Reported by Paul Stewart <stewart@xxxxxxxxxxxx>
@@ -317,7 +317,7 @@ UNUSUAL_DEV( 0x0482, 0x0107, 0x0100, 0x0100,
UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001,
"Hitachi",
"DVD-CAM DZ-MV100A Camcorder",
- US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN),
+ USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN),
/* BENQ DC5330
* Reported by Manuel Fombuena <mfombuena@xxxxxx> and
@@ -325,7 +325,7 @@ UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001,
UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"300_CAMERA",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Patch for Nikon coolpix 2000
@@ -333,14 +333,14 @@ UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100,
UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010,
"NIKON",
"NIKON DSC E2000",
- US_SC_DEVICE, US_PR_DEVICE,NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE,NULL,
US_FL_NOT_LOCKABLE ),
/* Reported by Doug Maxey (dwm@xxxxxxxxxxxxxx) */
UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110,
"IBM",
"IBM RSA2",
- US_SC_DEVICE, US_PR_CB, NULL,
+ USB_SC_DEVICE, USB_PR_CB, NULL,
US_FL_MAX_SECTORS_MIN),
/* Reported by Simon Levitt <simon@xxxxxxxxxx>
@@ -348,14 +348,14 @@ UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110,
UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100,
"Epson",
"875DC Storage",
- US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
+ USB_SC_SCSI, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
/* Reported by Khalid Aziz <khalid@xxxxxxxxxxxxxx>
* This entry is needed because the device reports Sub=ff */
UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110,
"Epson",
"785EPX Storage",
- US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN),
+ USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN),
/* Not sure who reported this originally but
* Pavel Machek <pavel@xxxxxx> reported that the extra US_FL_SINGLE_LUN
@@ -363,7 +363,7 @@ UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110,
UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
"Fujifilm",
"FinePix 1400Zoom",
- US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
+ USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
/* Reported by Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
* The device reports one sector more and breaks when that sector is accessed
@@ -371,7 +371,7 @@ UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
UNUSUAL_DEV( 0x04ce, 0x0002, 0x026c, 0x026c,
"ScanLogic",
"SL11R-IDE",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
/* Reported by Kriston Fincher <kriston@xxxxxxxxxxx>
@@ -382,27 +382,27 @@ UNUSUAL_DEV( 0x04ce, 0x0002, 0x026c, 0x026c,
UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200,
"Panasonic",
"LS-120 Camera",
- US_SC_UFI, US_PR_DEVICE, NULL, 0),
+ USB_SC_UFI, USB_PR_DEVICE, NULL, 0),
/* From Yukihiro Nakai, via zaitcev@xxxxxxxxxx
* This is needed for CB instead of CBI */
UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000,
"Sharp CE-CW05",
"CD-R/RW Drive",
- US_SC_8070, US_PR_CB, NULL, 0),
+ USB_SC_8070, USB_PR_CB, NULL, 0),
/* Reported by Adriaan Penning <a.penning@xxxxxxxx> */
UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999,
"Panasonic",
"DMC-LCx Camera",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
/* Reported by Simeon Simeonov <simeonov_2000@xxxxxxxxx> */
UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999,
"LEICA",
"D-LUX Camera",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
/* Most of the following entries were developed with the help of
@@ -411,19 +411,19 @@ UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999,
UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200,
"Matshita",
"LS-120",
- US_SC_8020, US_PR_CB, NULL, 0),
+ USB_SC_8020, USB_PR_CB, NULL, 0),
UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100,
"Shuttle",
"eUSCSI Bridge",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
#ifdef NO_SDDR09
UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
"SCM Microsystems",
"eUSB CompactFlash Adapter",
- US_SC_SCSI, US_PR_CB, NULL,
+ USB_SC_SCSI, USB_PR_CB, NULL,
US_FL_SINGLE_LUN),
#endif
@@ -431,54 +431,54 @@ UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100,
"SCM Microsystems Inc.",
"eUSB MMC Adapter",
- US_SC_SCSI, US_PR_CB, NULL,
+ USB_SC_SCSI, USB_PR_CB, NULL,
US_FL_SINGLE_LUN),
/* Reported by Daniel Nouri <dpunktnpunkt@xxxxxx> */
UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205,
"Shuttle",
"eUSB MMC Adapter",
- US_SC_SCSI, US_PR_DEVICE, NULL,
+ USB_SC_SCSI, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN),
UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200,
"Sony",
"Hifd",
- US_SC_SCSI, US_PR_CB, NULL,
+ USB_SC_SCSI, USB_PR_CB, NULL,
US_FL_SINGLE_LUN),
UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200,
"Shuttle",
"eUSB ATA/ATAPI Adapter",
- US_SC_8020, US_PR_CB, NULL, 0),
+ USB_SC_8020, USB_PR_CB, NULL, 0),
UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200,
"Shuttle",
"eUSB CompactFlash Adapter",
- US_SC_8020, US_PR_CB, NULL, 0),
+ USB_SC_8020, USB_PR_CB, NULL, 0),
UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100,
"Shuttle",
"eUSCSI Bridge",
- US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+ USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100,
"Shuttle",
"eUSCSI Bridge",
- US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+ USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200,
"Shuttle",
"CD-RW Device",
- US_SC_8020, US_PR_CB, NULL, 0),
+ USB_SC_8020, USB_PR_CB, NULL, 0),
/* Reported by Dmitry Khlystov <adminimus@xxxxxxxxx> */
UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220,
"Samsung",
"YP-U3",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64),
/* Entry and supporting patch by Theodore Kilgore <kilgota@xxxxxxxxxx>.
@@ -488,14 +488,14 @@ UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220,
UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
"Kobian Mercury",
"Binocam DCB-132",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BULK32),
/* Reported by Bob Sass <rls@xxxxxxxxxxxx> -- only rev 1.33 tested */
UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
"Belkin",
"USB SCSI Adaptor",
- US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+ USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
/* Iomega Clik! Drive
@@ -505,14 +505,14 @@ UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100,
"Iomega",
"USB Clik! 40",
- US_SC_8070, US_PR_DEVICE, NULL,
+ USB_SC_8070, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* Added by Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> */
COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999,
"Linux",
"File-backed Storage Gadget",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_CAPACITY_OK ),
/* Yakumo Mega Image 37
@@ -520,7 +520,7 @@ COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999,
UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"300_CAMERA",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Another Yakumo camera.
@@ -528,14 +528,14 @@ UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100,
UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"300_CAMERA",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Iacopo Spalletti <avvisi@xxxxxxxxxxxx> */
UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"300_CAMERA",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Yakumo Mega Image 47
@@ -543,7 +543,7 @@ UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100,
UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"400_CAMERA",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Paul Ortyl <ortylp@xxxxxxxxxxx>
@@ -551,13 +551,13 @@ UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100,
UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100,
"Tekom Technologies, Inc",
"400_CAMERA",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450,
"Sony",
"DSC-S30/S70/S75/505V/F505/F707/F717/P8",
- US_SC_SCSI, US_PR_DEVICE, NULL,
+ USB_SC_SCSI, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
/* Submitted by Lars Jacob <jacob.lars@xxxxxxxxxxxxxx>
@@ -565,7 +565,7 @@ UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450,
UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610,
"Sony",
"DSC-T1/T5/H5",
- US_SC_8070, US_PR_DEVICE, NULL,
+ USB_SC_8070, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
@@ -573,88 +573,88 @@ UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610,
UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100,
"Sony",
"Memorystick NW-MS7",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Submitted by Olaf Hering, <olh@xxxxxxx> SuSE Bugzilla #49049 */
UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000,
"Sony",
"USB Floppy Drive",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100,
"Sony",
"Memorystick MSAC-US1",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Submitted by Klaus Mueller <k.mueller@xxxxxxxxxxxx> */
UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310,
"Sony",
"Handycam",
- US_SC_SCSI, US_PR_DEVICE, NULL,
+ USB_SC_SCSI, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Submitted by Rajesh Kumble Nayak <nayak@xxxxxxxxxxx> */
UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500,
"Sony",
"Handycam HC-85",
- US_SC_UFI, US_PR_DEVICE, NULL,
+ USB_SC_UFI, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999,
"Sony",
"Memorystick MSC-U01N",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Submitted by Michal Mlotek <mlotek@xxxxxxxxx> */
UNUSUAL_DEV( 0x054c, 0x0058, 0x0000, 0x9999,
"Sony",
"PEG N760c Memorystick",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
UNUSUAL_DEV( 0x054c, 0x0069, 0x0000, 0x9999,
"Sony",
"Memorystick MSC-U03",
- US_SC_UFI, US_PR_CB, NULL,
+ USB_SC_UFI, USB_PR_CB, NULL,
US_FL_SINGLE_LUN ),
/* Submitted by Nathan Babb <nathan@xxxxxxxx> */
UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999,
"Sony",
"PEG Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* Submitted by Frank Engel <frankie@xxxxxxxxxxxxxxx> */
UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999,
"Sony",
"PEG Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* Submitted by Mike Alborn <malborn@xxxxxxxxxxxxxxxxxx> */
UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999,
"Sony",
"PEG Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* floppy reports multiple luns */
UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210,
"SAMSUNG",
"SFD-321U [FW 0C]",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* We keep this entry to force the transport; firmware 3.00 and later is ok. */
UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299,
"Y-E Data",
"Flashbuster-U",
- US_SC_DEVICE, US_PR_CB, NULL,
+ USB_SC_DEVICE, USB_PR_CB, NULL,
US_FL_SINGLE_LUN),
/* Reported by Johann Cardon <johann.cardon@xxxxxxx>
@@ -664,20 +664,20 @@ UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299,
UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999,
"Y-E Data",
"Silicon Media R/W",
- US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
/* Reported by RTE <raszilki@xxxxxxxxx> */
UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141,
"JetFlash",
"TS1GJF2A/120",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/* Fabrizio Fellini <fello@xxxxxxxxx> */
UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210,
"Fujifilm",
"Digital Camera EX-20 DSC",
- US_SC_8070, US_PR_DEVICE, NULL, 0 ),
+ USB_SC_8070, USB_PR_DEVICE, NULL, 0 ),
/* Reported by Andre Welter <a.r.welter@xxxxxx>
* This antique device predates the release of the Bulk-only Transport
@@ -688,14 +688,14 @@ UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210,
UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100,
"Iomega",
"ZIP 100",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Reported by <Hendryk.Pfeiffer@xxxxxx> */
UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000,
"LaCie",
"DVD+-RW",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_GO_SLOW ),
/* Submitted by Joel Bourquard <numlock@xxxxxxxxxxx>
@@ -705,7 +705,7 @@ UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000,
UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110,
"In-System",
"PyroGate External CD-ROM Enclosure (FCD-523)",
- US_SC_SCSI, US_PR_BULK, NULL,
+ USB_SC_SCSI, USB_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
/* Submitted by Sven Anderson <sven-linux@xxxxxxxxxxx>
@@ -717,26 +717,26 @@ UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110,
UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999,
"Apple",
"iPod",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/* Reported by Avi Kivity <avi@xxxxxxxxxx> */
UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999,
"Apple",
"iPod",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999,
"Apple",
"iPod",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
"Apple",
"iPod",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/*
@@ -746,7 +746,7 @@ UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
"Apple",
"iPod",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/* Reported by Dan Williams <dcbw@xxxxxxxxxx>
@@ -758,14 +758,14 @@ UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
UNUSUAL_DEV( 0x05c6, 0x1000, 0x0000, 0x9999,
"Option N.V.",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init,
0),
/* Reported by Blake Matheny <bmatheny@xxxxxxxxxx> */
UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113,
"Lexar",
"USB CF Reader",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* The following two entries are for a Genesys USB to IDE
@@ -782,20 +782,20 @@ UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113,
UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff,
"Genesys Logic",
"USB to IDE Optical",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff,
"Genesys Logic",
"USB to IDE Disk",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
/* Reported by Ben Efros <ben@xxxxxxxxxxxxx> */
UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451,
"Genesys Logic",
"USB to SATA",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SANE_SENSE ),
/* Reported by Hanno Boeck <hanno@xxxxxx>
@@ -803,33 +803,33 @@ UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451,
UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999,
"Vivitar",
"Vivicam 35Xx",
- US_SC_SCSI, US_PR_BULK, NULL,
+ USB_SC_SCSI, USB_PR_BULK, NULL,
US_FL_FIX_INQUIRY ),
UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100,
"TEAC",
"Floppy Drive",
- US_SC_UFI, US_PR_CB, NULL, 0 ),
+ USB_SC_UFI, USB_PR_CB, NULL, 0 ),
/* Reported by Darsen Lu <darsen@xxxxxxxxxxxxxxxxxxxx> */
UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
"SigmaTel",
"USBMSC Audio Player",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/* Reported by Daniel Kukula <daniel.kuku@xxxxxxxxx> */
UNUSUAL_DEV( 0x067b, 0x1063, 0x0100, 0x0100,
"Prolific Technology, Inc.",
"Prolific Storage Gadget",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BAD_SENSE ),
/* Reported by Rogerio Brito <rbrito@xxxxxxxxxx> */
UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
"Prolific Technology, Inc.",
"Mass Storage Device",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NOT_LOCKABLE ),
/* Reported by Richard -=[]=- <micro_flyer@xxxxxxxxxxx> */
@@ -838,45 +838,45 @@ UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100,
"Prolific Technology Inc.",
"Mass Storage Device",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
/* Reported by Alex Butcher <alex.butcher@xxxxxxxxxxxxxx> */
UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0101,
"Prolific Technology Inc.",
"ATAPI-6 Bridge Controller",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
/* Submitted by Benny Sjostrand <benny@xxxxxxxxxxxxxxxx> */
UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
"Minolta",
"Dimage F300",
- US_SC_SCSI, US_PR_BULK, NULL, 0 ),
+ USB_SC_SCSI, USB_PR_BULK, NULL, 0 ),
/* Reported by Miguel A. Fosas <amn3s1a@xxxxxxx> */
UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001,
"Minolta",
"DIMAGE E223",
- US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),
+ USB_SC_SCSI, USB_PR_DEVICE, NULL, 0 ),
UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100,
"Hagiwara",
"Flashgate",
- US_SC_SCSI, US_PR_BULK, NULL, 0 ),
+ USB_SC_SCSI, USB_PR_BULK, NULL, 0 ),
/* Reported by David Hamilton <niftimusmaximus@xxxxxxxxx> */
UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001,
"Thomson Multimedia Inc.",
"RCA RD1080 MP3 Player",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/* Reported by Adrian Pilchowiec <adi1981@xxxxxx> */
UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000,
"RockChip",
"MP3",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
/* Reported by Jean-Baptiste Onofre <jb@xxxxxxxxxxxx>
@@ -886,7 +886,7 @@ UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000,
UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000,
"RockChip",
"MTP",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
/* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@xxxxxxxxx>
@@ -902,59 +902,59 @@ UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000,
UNUSUAL_DEV( 0x071b, 0x3203, 0x0100, 0x0100,
"RockChip",
"ROCK MP3",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64),
/* Reported by Olivier Blondeau <zeitoun@xxxxxxxxx> */
UNUSUAL_DEV( 0x0727, 0x0306, 0x0100, 0x0100,
"ATMEL",
"SND1 Storage",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE),
/* Submitted by Roman Hodek <roman@xxxxxxxxx> */
UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
"Sandisk",
"ImageMate SDDR-05a",
- US_SC_SCSI, US_PR_CB, NULL,
+ USB_SC_SCSI, USB_PR_CB, NULL,
US_FL_SINGLE_LUN ),
UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009,
"SanDisk Corporation",
"ImageMate CompactFlash USB",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
"Sandisk",
"ImageMate SDDR-12",
- US_SC_SCSI, US_PR_CB, NULL,
+ USB_SC_SCSI, USB_PR_CB, NULL,
US_FL_SINGLE_LUN ),
/* Reported by Eero Volotinen <eero@xxxxxxxxxxxxxx> */
UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999,
"Freecom Technologies",
"FHD-Classic",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133,
"Microtech",
"USB-SCSI-DB25",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
"Microtech",
"USB-SCSI-HD50",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
#ifdef NO_SDDR09
UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
"Microtech",
"CameraMate",
- US_SC_SCSI, US_PR_CB, NULL,
+ USB_SC_SCSI, USB_PR_CB, NULL,
US_FL_SINGLE_LUN ),
#endif
@@ -967,7 +967,7 @@ UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff,
"Datafab",
"KECF-USB",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
/* Reported by Rauch Wolke <rauchwolke@xxxxxxx>
@@ -976,7 +976,7 @@ UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff,
UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff,
"Simple Tech/Datafab",
"CF+SM Reader",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
@@ -986,42 +986,42 @@ UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff,
* - They don't like the INQUIRY command. So we must handle this command
* of the SCSI layer ourselves.
* - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have
- * bInterfaceProtocol=0x00 (US_PR_CBI) while others have 0x01 (US_PR_CB).
- * So don't remove the US_PR_CB override!
- * - Cameras with bcdDevice=0x9009 require the US_SC_8070 override.
+ * bInterfaceProtocol=0x00 (USB_PR_CBI) while others have 0x01 (USB_PR_CB).
+ * So don't remove the USB_PR_CB override!
+ * - Cameras with bcdDevice=0x9009 require the USB_SC_8070 override.
*/
UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999,
"Casio",
"QV DigitalCamera",
- US_SC_8070, US_PR_CB, NULL,
+ USB_SC_8070, USB_PR_CB, NULL,
US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
/* Submitted by Hartmut Wahl <hwahl@xxxxxxxx>*/
UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
"Samsung",
"Digimax 410",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY),
/* Reported by Luciano Rocha <luciano@xxxxxxxxxxx> */
UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001,
"Argosy",
"Storage",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
/* Reported and patched by Nguyen Anh Quynh <aquynh@xxxxxxxxx> */
UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001,
"Argosy",
"Storage",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
/* Reported by Martijn Hijdra <martijn.hijdra@xxxxxxxxx> */
UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
"Argosy",
"Storage",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
/* Entry and supporting patch by Theodore Kilgore <kilgota@xxxxxxxxxx>.
@@ -1033,7 +1033,7 @@ UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110,
"Grandtech",
"DC2MEGA",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BULK32),
/* Andrew Lunn <andrew@xxxxxxx>
@@ -1044,14 +1044,14 @@ UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110,
UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200,
"PanDigital",
"Photo Frame",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NOT_LOCKABLE),
/* Submitted by Jan De Luyck <lkml@xxxxxxxxx> */
UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
"CITIZEN",
"X1DE-USB",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN),
/* Submitted by Dylan Taft <d13f00l@xxxxxxxxx>
@@ -1060,7 +1060,7 @@ UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100,
"AIPTEK",
"Aiptek USB Keychain MP3 Player",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE),
/* Entry needed for flags. Moreover, all devices with this ID use
@@ -1071,7 +1071,7 @@ UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100,
UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100,
"Trumpion",
"t33520 USB Flash Card Controller",
- US_SC_DEVICE, US_PR_BULK, NULL,
+ USB_SC_DEVICE, USB_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
/* Reported by Filippo Bardelli <filibard@xxxxxxxxx>
@@ -1080,21 +1080,21 @@ UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100,
UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100,
"Trumpion Microelectronics, Inc.",
"33520 USB Digital Voice Recorder",
- US_SC_UFI, US_PR_DEVICE, NULL,
+ USB_SC_UFI, USB_PR_DEVICE, NULL,
0),
/* Trumpion Microelectronics MP3 player (felipe_alfaro@xxxxxxxxxxxxx) */
UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
"Trumpion",
"MP3 player",
- US_SC_RBC, US_PR_BULK, NULL,
+ USB_SC_RBC, USB_PR_BULK, NULL,
0 ),
/* aeb */
UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
"Feiya",
"5-in-1 Card Reader",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/* This Pentax still camera is not conformant
@@ -1107,7 +1107,7 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
"Pentax",
"Optio 2/3/400",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* These are virtual windows driver CDs, which the zd1211rw driver
@@ -1115,13 +1115,13 @@ UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
"ZyXEL",
"G-220F USB-WLAN Install",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE ),
UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
"SiteCom",
"WL-117 USB-WLAN Install",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE ),
/* Reported by Dan Williams <dcbw@xxxxxxxxxx>
@@ -1133,7 +1133,7 @@ UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
UNUSUAL_DEV( 0x0af0, 0x6971, 0x0000, 0x9999,
"Option N.V.",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init,
0),
/* Reported by F. Aben <f.aben@xxxxxxxxxx>
@@ -1143,7 +1143,7 @@ UNUSUAL_DEV( 0x0af0, 0x6971, 0x0000, 0x9999,
UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
"Option",
"GI 0401 SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
/* Reported by Jan Dumon <j.dumon@xxxxxxxxxx>
@@ -1153,104 +1153,104 @@ UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
"Option",
"GI 0431 SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
UNUSUAL_DEV( 0x0af0, 0x7701, 0x0000, 0x0000,
"Option",
"GI 0451 SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
UNUSUAL_DEV( 0x0af0, 0x7706, 0x0000, 0x0000,
"Option",
"GI 0451 SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
UNUSUAL_DEV( 0x0af0, 0x7901, 0x0000, 0x0000,
"Option",
"GI 0452 SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
UNUSUAL_DEV( 0x0af0, 0x7A01, 0x0000, 0x0000,
"Option",
"GI 0461 SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
UNUSUAL_DEV( 0x0af0, 0x7A05, 0x0000, 0x0000,
"Option",
"GI 0461 SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
UNUSUAL_DEV( 0x0af0, 0x8300, 0x0000, 0x0000,
"Option",
"GI 033x SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
UNUSUAL_DEV( 0x0af0, 0x8302, 0x0000, 0x0000,
"Option",
"GI 033x SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0000,
"Option",
"GI 033x SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
UNUSUAL_DEV( 0x0af0, 0xc100, 0x0000, 0x0000,
"Option",
"GI 070x SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
UNUSUAL_DEV( 0x0af0, 0xd057, 0x0000, 0x0000,
"Option",
"GI 1505 SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
UNUSUAL_DEV( 0x0af0, 0xd058, 0x0000, 0x0000,
"Option",
"GI 1509 SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
UNUSUAL_DEV( 0x0af0, 0xd157, 0x0000, 0x0000,
"Option",
"GI 1515 SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
UNUSUAL_DEV( 0x0af0, 0xd257, 0x0000, 0x0000,
"Option",
"GI 1215 SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
UNUSUAL_DEV( 0x0af0, 0xd357, 0x0000, 0x0000,
"Option",
"GI 1505 SD-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
/* Reported by Ben Efros <ben@xxxxxxxxxxxxx> */
UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
"Seagate",
"FreeAgent Pro",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SANE_SENSE ),
UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999,
"Maxtor",
"USB to SATA",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SANE_SENSE),
/*
@@ -1260,14 +1260,14 @@ UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999,
UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
"Unknown",
"Unknown",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
/* Submitted by Joris Struyve <joris@xxxxxxxxxx> */
UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
"Medion",
"MD 7425",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY),
/*
@@ -1278,13 +1278,13 @@ UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200,
"Jenoptik",
"JD 5200 z3",
- US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
/* Reported by Jason Johnston <killean@xxxxxxx> */
UNUSUAL_DEV( 0x0dc4, 0x0073, 0x0000, 0x0000,
"Macpower Technology Co.LTD.",
"USB 2.0 3.5\" DEVICE",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
/* Reported by Lubomir Blaha <tritol@xxxxxxxxxxx>
@@ -1295,7 +1295,7 @@ UNUSUAL_DEV( 0x0dc4, 0x0073, 0x0000, 0x0000,
UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
"Netac",
"USB-CF-Card",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* Reported by Edward Chapman (taken from linux-usb mailing list)
@@ -1303,7 +1303,7 @@ UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
"Netac",
"USB Flash Disk",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
@@ -1312,28 +1312,28 @@ UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
"WINWARD",
"Music Disk",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Ian McConnell <ian at emit.demon.co.uk> */
UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012,
"PNP_MP3",
"PNP_MP3 PLAYER",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Jim McCloskey <mcclosk@xxxxxxxx> */
UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100,
"Cowon Systems",
"iAUDIO M5",
- US_SC_DEVICE, US_PR_BULK, NULL,
+ USB_SC_DEVICE, USB_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
/* Submitted by Antoine Mairesse <antoine.mairesse@xxxxxxx> */
UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
"USB",
"Solid state disk",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* Submitted by Daniel Drake <dsd@xxxxxxxxxx>
@@ -1341,14 +1341,14 @@ UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110,
"Ours Technology",
"Flash Disk",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Rastislav Stanik <rs_kernel@xxxxxxxxx> */
UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110,
"USB",
"Flash Disk",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Benjamin Schiller <sbenni@xxxxxx>
@@ -1356,7 +1356,7 @@ UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110,
UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103,
"Typhoon",
"My DJ 1820",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
/* Patch by Leonid Petrov mail at lpetrov.net
@@ -1367,7 +1367,7 @@ UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103,
UNUSUAL_DEV( 0x0f19, 0x0103, 0x0100, 0x0100,
"Oracom Co., Ltd",
"ORC-200M",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* David Kuehling <dvdkhlng@xxxxxx>:
@@ -1377,21 +1377,21 @@ UNUSUAL_DEV( 0x0f19, 0x0103, 0x0100, 0x0100,
UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100,
"C-MEX",
"A-VOX",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Michael Stattmann <michael@xxxxxxxxxxxxx> */
UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
"Sony Ericsson",
"V800-Vodafone 802",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT ),
/* Reported by The Solutor <thesolutor@xxxxxxxxx> */
UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000,
"Sony Ericsson",
"MD400",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE),
/* Reported by Jan Mate <mate@xxxxxxxxxxxxx>
@@ -1399,21 +1399,21 @@ UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000,
UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
"Sony Ericsson",
"P990i",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
/* Reported by Emmanuel Vasilakis <evas@xxxxxxxxxxx> */
UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000,
"Sony Ericsson",
"M600i",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by Ricardo Barberis <ricardo@xxxxxxxxxxxx> */
UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000,
"Sony Ericsson",
"P1i",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Kevin Cernekee <kpc-usbdev@xxxxxxxxxxxxxxx>
@@ -1425,13 +1425,13 @@ UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000,
UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110,
"Desknote",
"UCR-61S2B",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_ucr61s2b_init,
0 ),
UNUSUAL_DEV( 0x1058, 0x0704, 0x0000, 0x9999,
"Western Digital",
"External HDD",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SANE_SENSE),
/* Reported by Fabio Venturi <f.venturi@xxxxxxxx>
@@ -1440,7 +1440,7 @@ UNUSUAL_DEV( 0x1058, 0x0704, 0x0000, 0x9999,
UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100,
"Actions Semiconductor",
"Mtp device",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0),
/* Reported by Pascal Terjan <pterjan@xxxxxxxxxxxx>
@@ -1449,7 +1449,7 @@ UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100,
UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000,
"D-Link",
"USB Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE),
+ USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE),
/* Reported by Kevin Lloyd <linux@xxxxxxxxxxxxxxxxxx>
* Entry is needed for the initializer function override,
@@ -1459,7 +1459,7 @@ UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000,
UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999,
"Sierra Wireless",
"USB MMC Storage",
- US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, sierra_ms_init,
0),
/* Reported by Jaco Kroon <jaco@xxxxxxxxxxx>
@@ -1469,7 +1469,7 @@ UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999,
UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100,
"Digitech HMG",
"DigiTech Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by fangxiaozhi <huananhu@xxxxxxxxxx>
@@ -1478,353 +1478,353 @@ UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100,
UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001,
"Minolta",
"Dimage Z10",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
0 ),
/* Reported by Kotrla Vitezslav <kotrla@xxxxxx> */
UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110,
"SWISSBIT",
"Black Silver",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Francesco Foresti <frafore@xxxxxxxxxx> */
UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201,
"Super Top",
"IDE DEVICE",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Alexandre Oliva <oliva@xxxxxxxxxxxxxxxxx>
@@ -1833,7 +1833,7 @@ UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201,
UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100,
"JMicron",
"USB to ATA/ATAPI Bridge",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
/* Reported by Robert Schedel <r.schedel@xxxxxxxx>
@@ -1841,7 +1841,7 @@ UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100,
UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
"Teac",
"HD-35PUK-B",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Hans de Goede <hdegoede@xxxxxxxxxx>
@@ -1851,18 +1851,18 @@ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
UNUSUAL_DEV( 0x1908, 0x1315, 0x0000, 0x0000,
"BUILDWIN",
"Photo Frame",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BAD_SENSE ),
UNUSUAL_DEV( 0x1908, 0x1320, 0x0000, 0x0000,
"BUILDWIN",
"Photo Frame",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BAD_SENSE ),
UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
"ST",
"2A",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
/* patch submitted by Davide Perini <perini.davide@xxxxxxxxxxxxxx>
@@ -1871,7 +1871,7 @@ UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001,
"Motorola",
"RAZR V3x",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
/*
@@ -1882,14 +1882,14 @@ UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001,
UNUSUAL_DEV( 0x22b8, 0x6426, 0x0101, 0x0101,
"Motorola",
"MSnc.",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
/* Reported by Radovan Garabik <garabik@xxxxxxxxxxxxxxxxxxxxxxxx> */
UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
"MPIO",
"HS200",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_GO_SLOW ),
/* Reported by Frederic Marchal <frederic.marchal@xxxxxxxxxxxxxx>
@@ -1898,21 +1898,21 @@ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
UNUSUAL_DEV( 0x3340, 0xffff, 0x0000, 0x0000,
"Mitac",
"Mio DigiWalker USB Sync",
- US_SC_DEVICE,US_PR_DEVICE,NULL,
+ USB_SC_DEVICE,USB_PR_DEVICE,NULL,
US_FL_MAX_SECTORS_64 ),
/* Reported by Andrey Rahmatullin <wrar@xxxxxxxxxxxx> */
UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100,
"iRiver",
"MP3 T10",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Sergey Pinaev <dfo@xxxxxxxx> */
UNUSUAL_DEV( 0x4102, 0x1059, 0x0000, 0x0000,
"iRiver",
"P7K",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
/*
@@ -1922,41 +1922,41 @@ UNUSUAL_DEV( 0x4102, 0x1059, 0x0000, 0x0000,
UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100,
"Iomega",
"Micro Mini 1GB",
- US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
/* Reported by Andrew Simmons <andrew.simmons@xxxxxxxxx> */
UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001,
"DataStor",
"USB4500 FW1.04",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_CAPACITY_HEURISTICS),
/* Reported by Alessio Treglia <quadrispro@xxxxxxxxxx> */
UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001,
"TGE",
"Digital MP3 Audio Player",
- US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
/* Control/Bulk transport for all SubClass values */
-USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_RBC, USB_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_8020, USB_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_QIC, USB_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_UFI, USB_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_8070, USB_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_SCSI, USB_PR_CB, USB_US_TYPE_STOR),
/* Control/Bulk/Interrupt transport for all SubClass values */
-USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_RBC, USB_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_8020, USB_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_QIC, USB_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_UFI, USB_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_8070, USB_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_SCSI, USB_PR_CBI, USB_US_TYPE_STOR),
/* Bulk-only transport for all SubClass values */
-USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0),
+USUAL_DEV(USB_SC_RBC, USB_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_8020, USB_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_QIC, USB_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_UFI, USB_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_8070, USB_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_SCSI, USB_PR_BULK, 0),
diff --git a/drivers/usb/storage/unusual_freecom.h b/drivers/usb/storage/unusual_freecom.h
index 3758679..59a2611 100644
--- a/drivers/usb/storage/unusual_freecom.h
+++ b/drivers/usb/storage/unusual_freecom.h
@@ -21,6 +21,6 @@
UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999,
"Freecom",
"USB-IDE",
- US_SC_QIC, US_PR_FREECOM, init_freecom, 0),
+ USB_SC_QIC, USB_PR_FREECOM, init_freecom, 0),
#endif /* defined(CONFIG_USB_STORAGE_FREECOM) || ... */
diff --git a/drivers/usb/storage/unusual_isd200.h b/drivers/usb/storage/unusual_isd200.h
index 0d99dde..14cca0c 100644
--- a/drivers/usb/storage/unusual_isd200.h
+++ b/drivers/usb/storage/unusual_isd200.h
@@ -21,37 +21,37 @@
UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110,
"Sony",
"Portable USB Harddrive V2",
- US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+ USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
0),
UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110,
"In-System",
"USB/IDE Bridge (ATA/ATAPI)",
- US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+ USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
0),
UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110,
"In-System",
"Portable USB Harddrive V2",
- US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+ USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
0),
UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110,
"In-System",
"Portable USB Harddrive V2",
- US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+ USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
0),
UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110,
"In-System",
"USB Storage Adapter V2",
- US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+ USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
0),
UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
"ATI",
"USB Cable 205",
- US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+ USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
0),
#endif /* defined(CONFIG_USB_STORAGE_ISD200) || ... */
diff --git a/drivers/usb/storage/unusual_jumpshot.h b/drivers/usb/storage/unusual_jumpshot.h
index 2e549b1..54be78b 100644
--- a/drivers/usb/storage/unusual_jumpshot.h
+++ b/drivers/usb/storage/unusual_jumpshot.h
@@ -21,7 +21,7 @@
UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001,
"Lexar",
"Jumpshot USB CF Reader",
- US_SC_SCSI, US_PR_JUMPSHOT, NULL,
+ USB_SC_SCSI, USB_PR_JUMPSHOT, NULL,
US_FL_NEED_OVERRIDE),
#endif /* defined(CONFIG_USB_STORAGE_JUMPSHOT) || ... */
diff --git a/drivers/usb/storage/unusual_karma.h b/drivers/usb/storage/unusual_karma.h
index 12ae3a0..6df0397 100644
--- a/drivers/usb/storage/unusual_karma.h
+++ b/drivers/usb/storage/unusual_karma.h
@@ -21,6 +21,6 @@
UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101,
"Rio",
"Rio Karma",
- US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
+ USB_SC_SCSI, USB_PR_KARMA, rio_karma_init, 0),
#endif /* defined(CONFIG_USB_STORAGE_KARMA) || ... */
diff --git a/drivers/usb/storage/unusual_onetouch.h b/drivers/usb/storage/unusual_onetouch.h
index bd9306b..0abb819 100644
--- a/drivers/usb/storage/unusual_onetouch.h
+++ b/drivers/usb/storage/unusual_onetouch.h
@@ -24,13 +24,13 @@
UNUSUAL_DEV( 0x0d49, 0x7000, 0x0000, 0x9999,
"Maxtor",
"OneTouch External Harddrive",
- US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
+ USB_SC_DEVICE, USB_PR_DEVICE, onetouch_connect_input,
0),
UNUSUAL_DEV( 0x0d49, 0x7010, 0x0000, 0x9999,
"Maxtor",
"OneTouch External Harddrive",
- US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
+ USB_SC_DEVICE, USB_PR_DEVICE, onetouch_connect_input,
0),
#endif /* defined(CONFIG_USB_STORAGE_ONETOUCH) || ... */
diff --git a/drivers/usb/storage/unusual_sddr09.h b/drivers/usb/storage/unusual_sddr09.h
index 50cab51..59a7e37 100644
--- a/drivers/usb/storage/unusual_sddr09.h
+++ b/drivers/usb/storage/unusual_sddr09.h
@@ -21,36 +21,36 @@
UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
"Microtech",
"CameraMate (DPCM_USB)",
- US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
+ USB_SC_SCSI, USB_PR_DPCM_USB, NULL, 0),
UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999,
"Sandisk",
"ImageMate SDDR09",
- US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+ USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
0),
/* This entry is from Andries.Brouwer@xxxxxx */
UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
"SCM Microsystems",
"eUSB SmartMedia / CompactFlash Adapter",
- US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
+ USB_SC_SCSI, USB_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
0),
UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100,
"Olympus",
"Camedia MAUSB-2",
- US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+ USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
0),
UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999,
"Sandisk",
"ImageMate SDDR-09",
- US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+ USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
0),
UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
"Microtech",
"CameraMate (DPCM_USB)",
- US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
+ USB_SC_SCSI, USB_PR_DPCM_USB, NULL, 0),
#endif /* defined(CONFIG_USB_STORAGE_SDDR09) || ... */
diff --git a/drivers/usb/storage/unusual_sddr55.h b/drivers/usb/storage/unusual_sddr55.h
index ae81ef7..fcb7e12 100644
--- a/drivers/usb/storage/unusual_sddr55.h
+++ b/drivers/usb/storage/unusual_sddr55.h
@@ -22,23 +22,23 @@
UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
"Datafab",
"MDSM-B reader",
- US_SC_SCSI, US_PR_SDDR55, NULL,
+ USB_SC_SCSI, USB_PR_SDDR55, NULL,
US_FL_FIX_INQUIRY),
/* SM part - aeb <Andries.Brouwer@xxxxxx> */
UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
"Datafab Systems, Inc.",
"USB to CF + SM Combo (LC1)",
- US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+ USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
"Acomdata",
"SM",
- US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+ USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999,
"Sandisk",
"ImageMate SDDR55",
- US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+ USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
#endif /* defined(CONFIG_USB_STORAGE_SDDR55) || ... */
diff --git a/drivers/usb/storage/unusual_usbat.h b/drivers/usb/storage/unusual_usbat.h
index 80e869f..38e79c4 100644
--- a/drivers/usb/storage/unusual_usbat.h
+++ b/drivers/usb/storage/unusual_usbat.h
@@ -21,23 +21,23 @@
UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001,
"HP",
"CD-Writer+ 8200e",
- US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
+ USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0),
UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
"HP",
"CD-Writer+ CD-4e",
- US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
+ USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0),
UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
"Shuttle/SCM",
"USBAT-02",
- US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
+ USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash,
US_FL_SINGLE_LUN),
UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005,
"Sandisk",
"ImageMate SDDR-05b",
- US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
+ USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash,
US_FL_SINGLE_LUN),
#endif /* defined(CONFIG_USB_STORAGE_USBAT) || ... */
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 90bb017..4219c19 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -512,10 +512,10 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
/* Store the entries */
us->unusual_dev = unusual_dev;
- us->subclass = (unusual_dev->useProtocol == US_SC_DEVICE) ?
+ us->subclass = (unusual_dev->useProtocol == USB_SC_DEVICE) ?
idesc->bInterfaceSubClass :
unusual_dev->useProtocol;
- us->protocol = (unusual_dev->useTransport == US_PR_DEVICE) ?
+ us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ?
idesc->bInterfaceProtocol :
unusual_dev->useTransport;
us->fflags = USB_US_ORIG_FLAGS(id->driver_info);
@@ -552,10 +552,10 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
struct usb_device_descriptor *ddesc = &dev->descriptor;
int msg = -1;
- if (unusual_dev->useProtocol != US_SC_DEVICE &&
+ if (unusual_dev->useProtocol != USB_SC_DEVICE &&
us->subclass == idesc->bInterfaceSubClass)
msg += 1;
- if (unusual_dev->useTransport != US_PR_DEVICE &&
+ if (unusual_dev->useTransport != USB_PR_DEVICE &&
us->protocol == idesc->bInterfaceProtocol)
msg += 2;
if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE))
@@ -582,21 +582,21 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
static void get_transport(struct us_data *us)
{
switch (us->protocol) {
- case US_PR_CB:
+ case USB_PR_CB:
us->transport_name = "Control/Bulk";
us->transport = usb_stor_CB_transport;
us->transport_reset = usb_stor_CB_reset;
us->max_lun = 7;
break;
- case US_PR_CBI:
+ case USB_PR_CBI:
us->transport_name = "Control/Bulk/Interrupt";
us->transport = usb_stor_CB_transport;
us->transport_reset = usb_stor_CB_reset;
us->max_lun = 7;
break;
- case US_PR_BULK:
+ case USB_PR_BULK:
us->transport_name = "Bulk";
us->transport = usb_stor_Bulk_transport;
us->transport_reset = usb_stor_Bulk_reset;
@@ -608,35 +608,35 @@ static void get_transport(struct us_data *us)
static void get_protocol(struct us_data *us)
{
switch (us->subclass) {
- case US_SC_RBC:
+ case USB_SC_RBC:
us->protocol_name = "Reduced Block Commands (RBC)";
us->proto_handler = usb_stor_transparent_scsi_command;
break;
- case US_SC_8020:
+ case USB_SC_8020:
us->protocol_name = "8020i";
us->proto_handler = usb_stor_pad12_command;
us->max_lun = 0;
break;
- case US_SC_QIC:
+ case USB_SC_QIC:
us->protocol_name = "QIC-157";
us->proto_handler = usb_stor_pad12_command;
us->max_lun = 0;
break;
- case US_SC_8070:
+ case USB_SC_8070:
us->protocol_name = "8070i";
us->proto_handler = usb_stor_pad12_command;
us->max_lun = 0;
break;
- case US_SC_SCSI:
+ case USB_SC_SCSI:
us->protocol_name = "Transparent SCSI";
us->proto_handler = usb_stor_transparent_scsi_command;
break;
- case US_SC_UFI:
+ case USB_SC_UFI:
us->protocol_name = "Uniform Floppy Interface (UFI)";
us->proto_handler = usb_stor_ufi_command;
break;
@@ -679,7 +679,7 @@ static int get_pipes(struct us_data *us)
}
}
- if (!ep_in || !ep_out || (us->protocol == US_PR_CBI && !ep_int)) {
+ if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) {
US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n");
return -EIO;
}
@@ -834,7 +834,7 @@ static int usb_stor_scan_thread(void * __us)
if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) {
/* For bulk-only devices, determine the max LUN value */
- if (us->protocol == US_PR_BULK &&
+ if (us->protocol == USB_PR_BULK &&
!(us->fflags & US_FL_SINGLE_LUN)) {
mutex_lock(&us->dev_mutex);
us->max_lun = usb_stor_Bulk_max_lun(us);
diff --git a/include/linux/usb/storage.h b/include/linux/usb/storage.h
index 218caf0..c9c383d 100644
--- a/include/linux/usb/storage.h
+++ b/include/linux/usb/storage.h
@@ -11,34 +11,34 @@
/* Storage subclass codes */
-#define US_SC_RBC 0x01 /* Typically, flash devices */
-#define US_SC_8020 0x02 /* CD-ROM */
-#define US_SC_QIC 0x03 /* QIC-157 Tapes */
-#define US_SC_UFI 0x04 /* Floppy */
-#define US_SC_8070 0x05 /* Removable media */
-#define US_SC_SCSI 0x06 /* Transparent */
-#define US_SC_LOCKABLE 0x07 /* Password-protected */
-
-#define US_SC_ISD200 0xf0 /* ISD200 ATA */
-#define US_SC_CYP_ATACB 0xf1 /* Cypress ATACB */
-#define US_SC_DEVICE 0xff /* Use device's value */
+#define USB_SC_RBC 0x01 /* Typically, flash devices */
+#define USB_SC_8020 0x02 /* CD-ROM */
+#define USB_SC_QIC 0x03 /* QIC-157 Tapes */
+#define USB_SC_UFI 0x04 /* Floppy */
+#define USB_SC_8070 0x05 /* Removable media */
+#define USB_SC_SCSI 0x06 /* Transparent */
+#define USB_SC_LOCKABLE 0x07 /* Password-protected */
+
+#define USB_SC_ISD200 0xf0 /* ISD200 ATA */
+#define USB_SC_CYP_ATACB 0xf1 /* Cypress ATACB */
+#define USB_SC_DEVICE 0xff /* Use device's value */
/* Storage protocol codes */
-#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */
-#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
-#define US_PR_BULK 0x50 /* bulk only */
-#define US_PR_UAS 0x62 /* USB Attached SCSI */
-
-#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */
-#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
-#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */
-#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
-#define US_PR_FREECOM 0xf1 /* Freecom */
-#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */
-#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
-#define US_PR_ALAUDA 0xf4 /* Alauda chipsets */
-#define US_PR_KARMA 0xf5 /* Rio Karma */
-
-#define US_PR_DEVICE 0xff /* Use device's value */
+#define USB_PR_CBI 0x00 /* Control/Bulk/Interrupt */
+#define USB_PR_CB 0x01 /* Control/Bulk w/o interrupt */
+#define USB_PR_BULK 0x50 /* bulk only */
+#define USB_PR_UAS 0x62 /* USB Attached SCSI */
+
+#define USB_PR_USBAT 0x80 /* SCM-ATAPI bridge */
+#define USB_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
+#define USB_PR_SDDR55 0x82 /* SDDR-55 (made up) */
+#define USB_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
+#define USB_PR_FREECOM 0xf1 /* Freecom */
+#define USB_PR_DATAFAB 0xf2 /* Datafab chipsets */
+#define USB_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
+#define USB_PR_ALAUDA 0xf4 /* Alauda chipsets */
+#define USB_PR_KARMA 0xf5 /* Rio Karma */
+
+#define USB_PR_DEVICE 0xff /* Use device's value */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
