"Anders, David" <x0132446@xxxxxx> writes: >> -----Original Message----- >> From: Gadiyar, Anand >> Sent: Wednesday, June 23, 2010 6:03 PM >> To: Koen Kooi; Kevin Hilman; Hunter, Jon >> Cc: Anders, David; linux-usb@xxxxxxxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx; >> Gupta, Ajay Kumar; felipe.balbi@xxxxxxxxx >> Subject: RE: [PATCH] select NOP_USB_XCEIV for OMAP4 >> >> Koen Kooi wrote: >> > Op 23 jun 2010, om 22:33 heeft Kevin Hilman het volgende geschreven: >> > > David Anders <x0132446@xxxxxx> writes: >> > > >> > >> Add select statement to force selection of NOP_USB_XCEIV for OMAP4. >> > >> >> > >> Signed-off-by: David Anders <x0132446@xxxxxx> >> > >> --- >> > >> drivers/usb/musb/Kconfig | 1 + >> > >> 1 files changed, 1 insertions(+), 0 deletions(-) >> > >> >> > >> diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig >> > >> index cfd38ed..e4624bc 100644 >> > >> --- a/drivers/usb/musb/Kconfig >> > >> +++ b/drivers/usb/musb/Kconfig >> > >> @@ -11,6 +11,7 @@ config USB_MUSB_HDRC >> > >> depends on (USB || USB_GADGET) >> > >> depends on (ARM || (BF54x && !BF544) || (BF52x && !BF522 && !BF523)) >> > >> select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN) >> > >> + select NOP_USB_XCEIV if ARCH_OMAP4 >> > >> select TWL4030_USB if MACH_OMAP_3430SDP >> > >> select USB_OTG_UTILS >> > >> tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' >> > > >> > > Shouldn't this be a board-specific option, and not set for every >> > > OMAP4-based config? >> > >> > If that's true, why do the davinci and blackfin archs force it? >> > >> >> Kevin's right. For OMAP4 at least, this is something that is probably' >> best left up to the board to select. >> >> For the davinci's and blackfins, they don't have an option. They have >> a fully transparent internal PHY which doesn't need any configuring. >> >> >> However, with the OMAP4, you could potentially use an external ULPI >> transceiver. >> This can be another transparent PHY for which we could select the >> NOP_XCEIV. >> Or it could be something like the PHY in the TWL5030 which may need >> configuring >> over an I2C interface. >> >> >> - Anand > > Normally I would agree with you, however there are a number of items > that I would like to iterate: > > 1. 100% of the currently known OMAP4 platforms use the NOP, wouldn't > it be easier to add an exception if/when one exists rather than add > each individual board that does require the NOP? Easier, yes. But easier isn't always the guiding principle for scalable, portable software. Personally, I would rather see these kinds of dependencies stated explicitly only where they are needed, and not stated in general rules with exceptons. > 2. Including the NOP does not preclude the usage of another > transceiver, simply don't register the NOP in your machine file. > > 3. The omap3_defconfig already has the NOP enabled. If we are pushing > towards a unified defconfig for omap2/3/4, then the NOP will be > enabled anyway. Linus is already pushing for more decisions to be made > directly in the Kconfig and consoldation of defconfigs(and/or removal > of them). > > 4. The NOP will need to be enabled if we intend to truly push for a > "Multi-Boot" image that will boot multiple omap3 and omap4 > platforms. For example if we have a kernel image that is intended to > boot the 4430sdp, blaze, panda, and board-X(with an external > transceiver), NOP is going to be included anyway. The other thing to keep in mind is on the opposite end of the spectrum from multi-boot kernels. Namely, minimal, tiny kernels targeted at specific platforms. By always enabling a feature that is not needed, there is unncessary code in your kernel image. I admit that for this particular feature, the code bloat is rather small. But the point is we don't want to enable features just because it's easier, when there are code bloat side effects. Even small amounts add up. > If the community in general is going to push for consolidated > defconfigs, more robust decision making in Kconfig, and Multi-Boot > support, then the way we thinking about what goes into Kconfig will > have to change as well. Agreed. But for this to scale, the dependencies must be stated specifically, not generally. In this case, the specific dependencies are on *boards*, not on the SoC. All that being said, I am not the maintainer of this area, so I'll leave it to Anand/Felipe/Ajay to make the call. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
