Add ITE IT5205FN (TYPEC MUX) under I2C2 bus and configure its properties;
also add references to it5205fn from MT6360 TYPE-C connector for TYPEC
configuration.
Signed-off-by: Fabien Parent <fparent@xxxxxxxxxxxx>
Signed-off-by: Simon Sun <simon.sun@xxxxxxxxxxxxxxx>
Signed-off-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
---
.../dts/mediatek/mt8395-genio-1200-evk.dts | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
Changes for v2:
- This is a new patch in the v2 patch.
Changes for v3:
- No change.
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
index 83d520226302..4c11c100e7b6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -229,6 +229,21 @@ &i2c2 {
pinctrl-0 = <&i2c2_pins>;
pinctrl-names = "default";
status = "okay";
+
+ it5205fn: typec-mux@48 {
+ compatible = "ite,it5205";
+ reg = <0x48>;
+ vcc-supply = <&mt6359_vibr_ldo_reg>;
+ mode-switch;
+ orientation-switch;
+ status = "okay";
+
+ port {
+ it5205_sbu_ep: endpoint {
+ remote-endpoint = <&mt6360_ssusb_sbu_ep>;
+ };
+ };
+ };
};
&i2c6 {
@@ -369,6 +384,13 @@ mt6360_ssusb_ep: endpoint {
remote-endpoint = <&ssusb_ep>;
};
};
+
+ port@2 {
+ reg = <2>;
+ mt6360_ssusb_sbu_ep: endpoint {
+ remote-endpoint = <&it5205_sbu_ep>;
+ };
+ };
};
};
};
--
2.45.2
