Add binding for anx7688 usb type-c bridge. I don't have a datasheet, but I did best I could. Signed-off-by: Pavel Machek <pavel@xxxxxx> diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7688.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7688.yaml new file mode 100644 index 000000000000..b9d60586937f --- /dev/null +++ b/Documentation/devicetree/bindings/usb/analogix,anx7688.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/analogix,anx7688.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX7688 Type-C controller + +maintainers: + - Pavel Machek <pavel@xxxxxx> + +properties: + compatible: + enum: + - analogix,anx7688 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + enable-gpios: + maxItems: 1 + cabledet-gpios: + maxItems: 1 + + avdd10-supply: + description: + 1.0V power supply + dvdd10-supply: + description: + 1.0V power supply + avdd18-supply: + description: + 1.8V power supply + dvdd18-supply: + description: + 1.8V power supply + avdd33-supply: + description: + 3.3V power supply + i2c-supply: + description: + Power supply + vconn-supply: + description: + Power supply + hdmi_vt-supply: + description: + Power supply + + vbus-supply: + description: + Power supply + vbus_in-supply: + description: + Power supply + + connector: + type: object + $ref: ../connector/usb-connector.yaml + unevaluatedProperties: false + + description: + Properties for usb c connector. + + properties: + compatible: + const: usb-c-connector + + power-role: true + + data-role: true + + try-power-role: true + + required: + - compatible + +required: + - compatible + - reg + - connector + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec@2c { + compatible = "analogix,anx7688"; + reg = <0x2c>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio0>; + + enable-gpios = <&pio 3 10 GPIO_ACTIVE_LOW>; /* PD10 */ + reset-gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ + cabledet-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + + avdd10-supply = <®_anx1v0>; + dvdd10-supply = <®_anx1v0>; + avdd18-supply = <®_ldo_io1>; + dvdd18-supply = <®_ldo_io1>; + avdd33-supply = <®_dcdc1>; + i2c-supply = <®_ldo_io0>; + vconn-supply = <®_vconn5v0>; + hdmi_vt-supply = <®_dldo1>; + + vbus-supply = <®_usb_5v>; + vbus_in-supply = <&usb_power_supply>; + + typec_con: connector { + compatible = "usb-c-connector"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "source"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + typec_con_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/generic-xhci.yaml b/Documentation/devicetree/bindings/usb/generic-xhci.yaml index 594ebb3ee432..6ceafa4af292 100644 --- a/Documentation/devicetree/bindings/usb/generic-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-xhci.yaml @@ -9,9 +9,6 @@ title: USB xHCI Controller maintainers: - Mathias Nyman <mathias.nyman@xxxxxxxxx> -allOf: - - $ref: usb-xhci.yaml# - properties: compatible: oneOf: @@ -25,6 +22,11 @@ properties: - marvell,armada-380-xhci - marvell,armada-8k-xhci - const: generic-xhci + - description: Broadcom SoCs with power domains + items: + - enum: + - brcm,bcm2711-xhci + - const: brcm,xhci-brcm-v2 - description: Broadcom STB SoCs with xHCI enum: - brcm,xhci-brcm-v2 @@ -49,6 +51,9 @@ properties: - const: core - const: reg + power-domains: + maxItems: 1 + unevaluatedProperties: false required: @@ -56,6 +61,20 @@ required: - reg - interrupts +allOf: + - $ref: usb-xhci.yaml# + - if: + properties: + compatible: + contains: + const: brcm,bcm2711-xhci + then: + required: + - power-domains + else: + properties: + power-domains: false + examples: - | usb@f0931000 { diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml index ee08b9c3721f..37cf5249e526 100644 --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml @@ -29,6 +29,11 @@ properties: description: the regulator that provides 3.3V core power to the hub. + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml index e9644e333d78..924fd3d748a8 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml @@ -124,6 +124,17 @@ properties: defined in the xHCI spec on MTK's controller. default: 5000 + rx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + It is a quirk used to work around Gen1 isoc-in endpoint transfer issue + that still send out unexpected ACK after device finishes the burst + transfer with a short packet and cause an exception, specially on a 4K + camera device, it happens on controller before about IPM v1.6.0; + the side-effect is that it may cause performance drop about 10%, + including bulk transfer, prefer to use 3k here. The size is in bytes. + enum: [1024, 2048, 3072, 4096] + # the following properties are only used for case 1 wakeup-source: description: enable USB remote wakeup, see power/wakeup-source.txt diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml index 28eb25ecba74..eaedb4cc6b6c 100644 --- a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml +++ b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: NXP PTN5110 Typec Port Cotroller +title: NXP PTN5110 Type-C Port Controller maintainers: - Li Jun <jun.li@xxxxxxx> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 915c8205623b..63d150b216c5 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -46,6 +46,8 @@ properties: - qcom,sm8350-dwc3 - qcom,sm8450-dwc3 - qcom,sm8550-dwc3 + - qcom,sm8650-dwc3 + - qcom,x1e80100-dwc3 - const: qcom,dwc3 reg: @@ -97,12 +99,29 @@ properties: - const: apps-usb interrupts: - minItems: 1 - maxItems: 4 + description: | + Different types of interrupts are used based on HS PHY used on target: + - pwr_event: Used for wakeup based on other power events. + - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is + hs_phy_irq which is not triggered by default and its + functionality is mutually exclusive to that of + {dp/dm}_hs_phy_irq and qusb2_phy_irq. + - qusb2_phy: SoCs with QUSB2 PHY do not have separate DP/DM IRQs and + expose only a single IRQ whose behavior can be modified + by the QUSB2PHY_INTR_CTRL register. The required DPSE/ + DMSE configuration is done in QUSB2PHY_INTR_CTRL register + of PHY address space. + - {dp/dm}_hs_phy_irq: These IRQ's directly reflect changes on the DP/ + DM pads of the SoC. These are used for wakeup + only on SoCs with non-QUSB2 targets with + exception of SDM670/SDM845/SM6350. + - ss_phy_irq: Used for remote wakeup in Super Speed mode of operation. + minItems: 2 + maxItems: 5 interrupt-names: - minItems: 1 - maxItems: 4 + minItems: 2 + maxItems: 5 qcom,select-utmi-as-pipe-clk: description: @@ -263,6 +282,7 @@ allOf: contains: enum: - qcom,sc8280xp-dwc3 + - qcom,x1e80100-dwc3 then: properties: clocks: @@ -288,8 +308,8 @@ allOf: then: properties: clocks: - minItems: 5 - maxItems: 6 + minItems: 4 + maxItems: 5 clock-names: oneOf: - items: @@ -298,13 +318,11 @@ allOf: - const: iface - const: sleep - const: mock_utmi - - const: bus - items: - const: cfg_noc - const: core - const: sleep - const: mock_utmi - - const: bus - if: properties: @@ -318,6 +336,7 @@ allOf: - qcom,sm8250-dwc3 - qcom,sm8450-dwc3 - qcom,sm8550-dwc3 + - qcom,sm8650-dwc3 then: properties: clocks: @@ -357,131 +376,96 @@ allOf: compatible: contains: enum: - - qcom,ipq4019-dwc3 + - qcom,ipq5018-dwc3 - qcom,ipq6018-dwc3 - - qcom,ipq8064-dwc3 - qcom,ipq8074-dwc3 - - qcom,msm8994-dwc3 + - qcom,msm8953-dwc3 + - qcom,msm8998-dwc3 + then: + properties: + interrupts: + minItems: 2 + maxItems: 3 + interrupt-names: + items: + - const: pwr_event + - const: qusb2_phy + - const: ss_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-dwc3 - qcom,qcs404-dwc3 + - qcom,sdm660-dwc3 + - qcom,sm6115-dwc3 + - qcom,sm6125-dwc3 + then: + properties: + interrupts: + minItems: 3 + maxItems: 4 + interrupt-names: + items: + - const: pwr_event + - const: qusb2_phy + - const: hs_phy_irq + - const: ss_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq5332-dwc3 + - qcom,x1e80100-dwc3 + then: + properties: + interrupts: + maxItems: 4 + interrupt-names: + items: + - const: pwr_event + - const: dp_hs_phy_irq + - const: dm_hs_phy_irq + - const: ss_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq4019-dwc3 + - qcom,ipq8064-dwc3 + - qcom,msm8994-dwc3 + - qcom,sa8775p-dwc3 - qcom,sc7180-dwc3 + - qcom,sc7280-dwc3 + - qcom,sc8280xp-dwc3 - qcom,sdm670-dwc3 - qcom,sdm845-dwc3 - qcom,sdx55-dwc3 - qcom,sdx65-dwc3 - qcom,sdx75-dwc3 - qcom,sm4250-dwc3 - - qcom,sm6125-dwc3 - qcom,sm6350-dwc3 - qcom,sm8150-dwc3 - qcom,sm8250-dwc3 - qcom,sm8350-dwc3 - qcom,sm8450-dwc3 - qcom,sm8550-dwc3 + - qcom,sm8650-dwc3 then: properties: interrupts: - items: - - description: The interrupt that is asserted - when a wakeup event is received on USB2 bus. - - description: The interrupt that is asserted - when a wakeup event is received on USB3 bus. - - description: Wakeup event on DM line. - - description: Wakeup event on DP line. - interrupt-names: - items: - - const: hs_phy_irq - - const: ss_phy_irq - - const: dm_hs_phy_irq - - const: dp_hs_phy_irq - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8953-dwc3 - - qcom,msm8996-dwc3 - - qcom,msm8998-dwc3 - - qcom,sm6115-dwc3 - then: - properties: - interrupts: - maxItems: 2 - interrupt-names: - items: - - const: hs_phy_irq - - const: ss_phy_irq - - - if: - properties: - compatible: - contains: - enum: - - qcom,ipq5018-dwc3 - - qcom,ipq5332-dwc3 - - qcom,sdm660-dwc3 - then: - properties: - interrupts: - minItems: 1 - maxItems: 2 - interrupt-names: - minItems: 1 - items: - - const: hs_phy_irq - - const: ss_phy_irq - - - if: - properties: - compatible: - contains: - enum: - - qcom,sc7280-dwc3 - then: - properties: - interrupts: - minItems: 3 - maxItems: 4 - interrupt-names: - minItems: 3 - items: - - const: hs_phy_irq - - const: dp_hs_phy_irq - - const: dm_hs_phy_irq - - const: ss_phy_irq - - - if: - properties: - compatible: - contains: - enum: - - qcom,sc8280xp-dwc3 - then: - properties: - interrupts: - maxItems: 4 + minItems: 4 + maxItems: 5 interrupt-names: items: - const: pwr_event - - const: dp_hs_phy_irq - - const: dm_hs_phy_irq - - const: ss_phy_irq - - - if: - properties: - compatible: - contains: - enum: - - qcom,sa8775p-dwc3 - then: - properties: - interrupts: - minItems: 3 - maxItems: 4 - interrupt-names: - minItems: 3 - items: - - const: pwr_event + - const: hs_phy_irq - const: dp_hs_phy_irq - const: dm_hs_phy_irq - const: ss_phy_irq @@ -519,12 +503,13 @@ examples: <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>, <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>, - <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; diff --git a/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml new file mode 100644 index 000000000000..7ddfd3313a18 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/qcom,wcd939x-usbss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WCD9380/WCD9385 USB SubSystem Altmode/Analog Audio Switch + +maintainers: + - Neil Armstrong <neil.armstrong@xxxxxxxxxx> + +description: + Qualcomm WCD9390/WCD9395 is a standalone Hi-Fi audio codec IC with a + functionally separate USB SubSystem for Altmode/Analog Audio Switch + accessible over an I2C interface. + The Audio Headphone and Microphone data path between the Codec and the + USB-C Mux subsystems are external to the IC, thus requiring DT port-endpoint + graph description to handle USB-C altmode & orientation switching for Audio + Accessory Mode. + +properties: + compatible: + oneOf: + - const: qcom,wcd9390-usbss + - items: + - const: qcom,wcd9395-usbss + - const: qcom,wcd9390-usbss + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vdd-supply: + description: USBSS VDD power supply + + mode-switch: + description: Flag the port as possible handle of altmode switching + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the WCD939x USB SubSystem to a TypeC controller for the + purpose of handling altmode muxing and orientation switching. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the WCD939x USB SubSystem to the Codec SubSystem for the + purpose of handling USB-C Audio Accessory Mode muxing and orientation switching. + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@42 { + compatible = "qcom,wcd9390-usbss"; + reg = <0x42>; + + vdd-supply = <&vreg_bob>; + + mode-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + wcd9390_usbss_sbu: endpoint { + remote-endpoint = <&typec_sbu>; + }; + }; + port@1 { + reg = <1>; + wcd9390_usbss_codec: endpoint { + remote-endpoint = <&wcd9390_codec_usbss>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index bad55dfb2fa0..40ada78f2328 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -19,7 +19,7 @@ properties: - items: - enum: - renesas,usbhs-r7s9210 # RZ/A2 - - renesas,usbhs-r9a07g043 # RZ/G2UL + - renesas,usbhs-r9a07g043 # RZ/G2UL and RZ/Five - renesas,usbhs-r9a07g044 # RZ/G2{L,LC} - renesas,usbhs-r9a07g054 # RZ/V2L - const: renesas,rza2-usbhs diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index ee5af4b381b1..203a1eb66691 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -432,6 +432,10 @@ properties: items: enum: [1, 4, 8, 16, 32, 64, 128, 256] + num-hc-interrupters: + maximum: 8 + default: 1 + port: $ref: /schemas/graph.yaml#/properties/port description: diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml index 323d664ae06a..1745e28b3110 100644 --- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml @@ -38,6 +38,10 @@ properties: - const: main - const: patch-address + reset-gpios: + description: GPIO used for the HRESET pin. + maxItems: 1 + wakeup-source: true interrupts: @@ -90,6 +94,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; @@ -106,6 +111,7 @@ examples: pinctrl-names = "default"; pinctrl-0 = <&typec_pins>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; typec_con: connector { compatible = "usb-c-connector"; diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.yaml b/Documentation/devicetree/bindings/usb/usb-xhci.yaml index 180a261c3e8f..4238ae896ef6 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/usb-xhci.yaml @@ -29,6 +29,12 @@ properties: description: Interrupt moderation interval default: 5000 + num-hc-interrupters: + description: Maximum number of interrupters to allocate + $ref: /schemas/types.yaml#/definitions/uint16 + minimum: 1 + maximum: 1024 + additionalProperties: true examples: -- People of Russia, stop Putin before his war on Ukraine escalates.
Attachment:
signature.asc
Description: PGP signature
