On 09/02/2024 20:51, Pavel Machek wrote: > Add binding for anx7688 usb type-c bridge. I don't have a datasheet, > but I did best I could. > > Signed-off-by: Pavel Machek <pavel@xxxxxx> > You miss proper diffstat which makes reviewing difficult. Actually entire patch is corrupted and impossible to apply. Anyway, where is any user of this? Nothing in commit msg explains this. > diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7688.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7688.yaml > new file mode 100644 > index 000000000000..b9d60586937f > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/analogix,anx7688.yaml > @@ -0,0 +1,140 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/usb/analogix,anx7688.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analogix ANX7688 Type-C controller > + > +maintainers: > + - Pavel Machek <pavel@xxxxxx> > + > +properties: > + compatible: > + enum: > + - analogix,anx7688 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + reset-gpios: > + maxItems: 1 blank line > + enable-gpios: > + maxItems: 1 > + cabledet-gpios: > + maxItems: 1 > + > + avdd10-supply: > + description: > + 1.0V power supply Keep description in one line and add a blank line. This code is not that readable. > + dvdd10-supply: > + description: > + 1.0V power supply > + avdd18-supply: > + description: > + 1.8V power supply > + dvdd18-supply: > + description: > + 1.8V power supply > + avdd33-supply: > + description: > + 3.3V power supply > + i2c-supply: > + description: > + Power supply Drop all useless descriptions (so : true) > + vconn-supply: > + description: > + Power supply > + hdmi_vt-supply: > + description: > + Power supply > + > + vbus-supply: > + description: > + Power supply > + vbus_in-supply: No underscores in property names. > + description: > + Power supply > + > + connector: > + type: object > + $ref: ../connector/usb-connector.yaml Full path, so /schemas/connector/...... > + unevaluatedProperties: false Drop > + > + description: > + Properties for usb c connector. > + > + properties: > + compatible: > + const: usb-c-connector > + > + power-role: true > + > + data-role: true > + > + try-power-role: true I don't understand why do you have here properties. Do you see any binding like this? > + > + required: > + - compatible Drop, why is it needed? > + > +required: > + - compatible > + - reg > + - connector > + > +additionalProperti I don't know what's further but this patch is not a patch... Please read submitting-patches, organize your patchset correctly into manageable logical chunks and send them as proper patchset, not one junk. b4 helps here a lot... > Best regards, Krzysztof
