Hi,
Sorry, email client issue with your email. Attempt to resend:
On Fri, Nov 17, 2023, Thinh Nguyen wrote:
> Hi,
>
> On Thu, Nov 16, 2023, Köry Maincent wrote:
> > On Thu, 16 Nov 2023 17:42:06 +0100
> > Köry Maincent <kory.maincent@xxxxxxxxxxx> wrote:
> >
> > > Hello,
> > >
> > > Similar issue with ZynqMP board related to that patch:
> > >
> > > xilinx-psgtr fd400000.phy: lane 3 (type 1, protocol 3): PLL lock timeout
> > > phy phy-fd400000.phy.3: phy poweron failed --> -110
> > > dwc3 fe300000.usb: error -ETIMEDOUT: failed to initialize core
> > >
> > > With CONFIG_USB_DWC3_DUAL_ROLE and dr_mode = "host";
> > >
> > > It may not be the correct fix.
> >
> > Just figured out there was a patch (357191036889 usb: dwc3: Soft reset phy on
> > probe for host) from Thinh aimed to fix it but the issue is still here on
> > ZynqMP.
> >
>
> How many ports do you use? Can you try this:
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 0328c86ef806..9921c2737829 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -296,23 +296,28 @@ int dwc3_core_soft_reset(struct dwc3 *dwc)
> if (dwc->dr_mode == USB_DR_MODE_HOST) {
> u32 usb3_port;
> u32 usb2_port;
> + int i;
>
> - usb3_port = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
> - usb3_port |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
> - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port);
> + for (i = 0; i < 16; i++) {
> + usb3_port = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i));
> + usb3_port |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
> + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), usb3_port);
>
> - usb2_port = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> - usb2_port |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port);
> + usb2_port = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
> + usb2_port |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), usb2_port);
> + }
>
> /* Small delay for phy reset assertion */
> usleep_range(1000, 2000);
>
> - usb3_port &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
> - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port);
> + for (i = 0; i < 16; i++) {
> + usb3_port &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
> + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), usb3_port);
>
> - usb2_port &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port);
> + usb2_port &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), usb2_port);
> + }
>
> /* Wait for clock synchronization */
> msleep(50);
> ---
