Hello, Small series to convert some of the board files in the mach-pxa directory to use the new GPIO descriptor interface. Most notably, the am200epd, am300epd and Spitz matrix keypad among others are not converted in this series. Signed-off-by: Duje Mihanović <duje.mihanovic@xxxxxxxx> --- Changes in v8: - Address maintainer comments: - Do not pointlessly gpiod_get() LED gpios - Update trailers - Rebase on v6.6-rc5 - Link to v7: https://lore.kernel.org/r/20231009-pxa-gpio-v7-0-c8f5f403e856@xxxxxxxx Changes in v7: - Address maintainer comments: - Drop gpiod_put in OHCI - Make "struct gpio_descs *leds" in Spitz LEDs global - Link to v6: https://lore.kernel.org/r/20231006-pxa-gpio-v6-0-981b4910d599@xxxxxxxx Changes in v6: - Address maintainer comments: - Use devm_gpiod_get_optional() in OHCI - Use gpiod_get_array() in Spitz LEDs - Update trailers - Link to v5: https://lore.kernel.org/r/20231004-pxa-gpio-v5-0-d99ae6fceea8@xxxxxxxx Changes in v5: - Address maintainer comments: - Rename "reset generator" GPIO to "reset" - Rename ads7846_wait_for_sync() to ads7846_wait_for_sync_gpio() - Properly bail out when requesting USB host GPIO fails - Use dev_err_probe() when requesting touchscreen sync GPIO fails - Use static gpio_desc for gumstix bluetooth reset - Pulse gumstix bluetooth reset line correctly (assert, then deassert) - Fix style issue in ads7846_wait_for_sync_gpio() - Update trailers - Link to v4: https://lore.kernel.org/r/20231001-pxa-gpio-v4-0-0f3b975e6ed5@xxxxxxxx Changes in v4: - Address maintainer comments: - Move wait_for_sync() from spitz.c to driver - Register LED platform device before getting its gpiod-s - Add Linus' Reviewed-by - Link to v3: https://lore.kernel.org/r/20230929-pxa-gpio-v3-0-af8d5e5d1f34@xxxxxxxx Changes in v3: - Address maintainer comments: - Use GPIO_LOOKUP_IDX for LEDs - Drop unnecessary NULL assignments - Don't give up on *all* SPI devices if hsync cannot be set up - Add Linus' Acked-by - Link to v2: https://lore.kernel.org/r/20230926-pxa-gpio-v2-0-984464d165dd@xxxxxxxx Changes in v2: - Address maintainer comments: - Change mentions of function to function() - Drop cast in OHCI driver dev_warn() call - Use %pe in OHCI and reset drivers - Use GPIO _optional() API in OHCI driver - Drop unnecessary not-null check in OHCI driver - Use pr_err() instead of printk() in reset driver - Rebase on v6.6-rc3 - Link to v1: https://lore.kernel.org/r/20230924-pxa-gpio-v1-0-2805b87d8894@xxxxxxxx --- Duje Mihanović (6): ARM: pxa: Convert Spitz OHCI to GPIO descriptors ARM: pxa: Convert Spitz LEDs to GPIO descriptors ARM: pxa: Convert Spitz CF power control to GPIO descriptors ARM: pxa: Convert reset driver to GPIO descriptors ARM: pxa: Convert gumstix Bluetooth to GPIO descriptors input: ads7846: Move wait_for_sync() logic to driver arch/arm/mach-pxa/gumstix.c | 22 ++++++------- arch/arm/mach-pxa/reset.c | 39 ++++++++-------------- arch/arm/mach-pxa/reset.h | 3 +- arch/arm/mach-pxa/spitz.c | 65 ++++++++++++++++++++++++------------- drivers/input/touchscreen/ads7846.c | 22 +++++++++---- drivers/usb/host/ohci-pxa27x.c | 5 +++ include/linux/spi/ads7846.h | 1 - 7 files changed, 88 insertions(+), 69 deletions(-) --- base-commit: 94f6f0550c625fab1f373bb86a6669b45e9748b3 change-id: 20230807-pxa-gpio-3ce25d574814 Best regards, -- Duje Mihanović <duje.mihanovic@xxxxxxxx>
