The PXA reset driver still uses the legacy GPIO interface for configuring and asserting the reset pin. Convert it to use the GPIO descriptor interface. Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> Signed-off-by: Duje Mihanović <duje.mihanovic@xxxxxxxx> --- arch/arm/mach-pxa/reset.c | 39 +++++++++++++-------------------------- arch/arm/mach-pxa/reset.h | 3 +-- arch/arm/mach-pxa/spitz.c | 6 +++++- 3 files changed, 19 insertions(+), 29 deletions(-) diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index 27293549f8ad..08bc104b9411 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -2,7 +2,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/io.h> #include <asm/proc-fns.h> #include <asm/system_misc.h> @@ -14,33 +14,20 @@ static void do_hw_reset(void); -static int reset_gpio = -1; +static struct gpio_desc *reset_gpio; -int init_gpio_reset(int gpio, int output, int level) +int init_gpio_reset(int output, int level) { - int rc; - - rc = gpio_request(gpio, "reset generator"); - if (rc) { - printk(KERN_ERR "Can't request reset_gpio\n"); - goto out; + reset_gpio = gpiod_get(NULL, "reset", GPIOD_ASIS); + if (IS_ERR(reset_gpio)) { + pr_err("Can't request reset_gpio: %pe\n", reset_gpio); + return PTR_ERR(reset_gpio); } if (output) - rc = gpio_direction_output(gpio, level); + return gpiod_direction_output(reset_gpio, level); else - rc = gpio_direction_input(gpio); - if (rc) { - printk(KERN_ERR "Can't configure reset_gpio\n"); - gpio_free(gpio); - goto out; - } - -out: - if (!rc) - reset_gpio = gpio; - - return rc; + return gpiod_direction_input(reset_gpio); } /* @@ -50,16 +37,16 @@ int init_gpio_reset(int gpio, int output, int level) */ static void do_gpio_reset(void) { - BUG_ON(reset_gpio == -1); + BUG_ON(IS_ERR(reset_gpio)); /* drive it low */ - gpio_direction_output(reset_gpio, 0); + gpiod_direction_output(reset_gpio, 0); mdelay(2); /* rising edge or drive high */ - gpio_set_value(reset_gpio, 1); + gpiod_set_value(reset_gpio, 1); mdelay(2); /* falling edge */ - gpio_set_value(reset_gpio, 0); + gpiod_set_value(reset_gpio, 0); /* give it some time */ mdelay(10); diff --git a/arch/arm/mach-pxa/reset.h b/arch/arm/mach-pxa/reset.h index 963dd190bc13..5864f61a0e94 100644 --- a/arch/arm/mach-pxa/reset.h +++ b/arch/arm/mach-pxa/reset.h @@ -13,10 +13,9 @@ extern void pxa_register_wdt(unsigned int reset_status); /** * init_gpio_reset() - register GPIO as reset generator - * @gpio: gpio nr * @output: set gpio as output instead of input during normal work * @level: output level */ -extern int init_gpio_reset(int gpio, int output, int level); +extern int init_gpio_reset(int output, int level); #endif /* __ASM_ARCH_RESET_H */ diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index b72c2916426a..acb2b5495dbe 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -1020,9 +1020,13 @@ static void spitz_restart(enum reboot_mode mode, const char *cmd) spitz_poweroff(); } +GPIO_LOOKUP_SINGLE(spitz_reset_gpio_table, NULL, "pxa-gpio", + SPITZ_GPIO_ON_RESET, "reset", GPIO_ACTIVE_HIGH); + static void __init spitz_init(void) { - init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0); + gpiod_add_lookup_table(&spitz_reset_gpio_table); + init_gpio_reset(1, 0); pm_power_off = spitz_poweroff; PMCR = 0x00; -- 2.42.0