On 5/17/2023 6:00 AM, Thinh Nguyen wrote:
On Wed, May 17, 2023, Thinh Nguyen wrote:
On Sun, May 14, 2023, Krishna Kurapati wrote:
Currently for dwc3_usb31 controller, if maximum_speed is limited to
super-speed in DT, then device mode is limited to SS, but host mode
still works in SSP.
The documentation for max-speed property is as follows:
"Tells USB controllers we want to work up to a certain speed.
Incase this isn't passed via DT, USB controllers should default to
their maximum HW capability."
It doesn't specify that the property is only for device mode.
There are cases where we need to limit the host's maximum speed to
SuperSpeed only. Use this property for host mode to contrain host's
speed to SuperSpeed.
Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
Link to v1: https://urldefense.com/v3/__https://lore.kernel.org/all/20230512170107.18821-1-quic_kriskura@xxxxxxxxxxx/__;!!A4F2R9G_pg!dCg_3WK2oNXNb6d0a_VuyjkeeZJTU1aY4dik6g35XB7mtG7EJeR1uPMfxFja49OfXp7Yhsg1yqjnylCYYEg7YCAhqfAZ0Q$
Discussion regarding the same at:
https://urldefense.com/v3/__https://lore.kernel.org/all/e465c69c-3a9d-cbdb-d44e-96b99cfa1a92@xxxxxxxxxxx/__;!!A4F2R9G_pg!dCg_3WK2oNXNb6d0a_VuyjkeeZJTU1aY4dik6g35XB7mtG7EJeR1uPMfxFja49OfXp7Yhsg1yqjnylCYYEg7YCDRLUrJWg$
drivers/usb/dwc3/core.c | 8 ++++++++
drivers/usb/dwc3/core.h | 5 +++++
2 files changed, 13 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 278cd1c33841..33bc72595e74 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1262,6 +1262,14 @@ static int dwc3_core_init(struct dwc3 *dwc)
}
}
+ if ((hw_mode != DWC3_GHWPARAMS0_MODE_GADGET) &&
+ (DWC3_IP_IS(DWC31)) &&
+ (dwc->maximum_speed == USB_SPEED_SUPER)) {
+ reg = dwc3_readl(dwc->regs, DWC3_LLUCTL);
+ reg |= DWC3_LLUCTL_FORCE_GEN1;
+ dwc3_writel(dwc->regs, DWC3_LLUCTL, reg);
+ }
+
Perhaps this should be done for every usb3 port rather than just the
port_0. This patch can go after your multi-port series is added to
Greg's branch where you can check for number of usb3 ports.
Can you also add dwc_usb32 settings? It should look something like this:
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 0beaab932e7d..4bd2564aa163 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1262,6 +1262,40 @@ static int dwc3_core_init(struct dwc3 *dwc)
}
}
+ if (hw_mode != DWC3_GHWPARAMS0_MODE_GADGET) {
+ int i;
+
+ if (DWC3_IP_IS(DWC31) &&
+ dwc->maximum_speed == USB_SPEED_SUPER) {
+ for (i = 0; i < dwc->num_usb3_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_LLUCTL(i));
+ reg |= DWC3_LLUCTL_FORCE_GEN1;
+ dwc3_writel(dwc->regs, DWC3_LLUCTL(i), reg);
+ }
+ }
+
+ if (DWC3_IP_IS(DWC32) &&
+ dwc->max_ssp_rate != USB_SSP_GEN_2x2) {
+ int lsr_speed = -EINVAL;
+
+ if (dwc->maximum_speed == USB_SPEED_SUPER)
+ lsr_speed = DWC3_LCSR_GEN_1x1;
+ else if (dwc->max_ssp_rate == USB_SSP_GEN_2x1)
+ lsr_speed = DWC3_LCSR_GEN_2x1;
+ else if (dwc->max_ssp_rate == USB_SSP_GEN_1x2)
+ lsr_speed = DWC3_LCSR_GEN_1x2;
+
+ if (lsr_speed != -EINVAL) {
+ for (i = 0; i < dwc->num_usb3_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_LCSR_USB32CTL(i));
+ reg &= ~DWC3_LCSR_USB32CTL_SPEED_MASK;
+ reg |= lsr_speed;
+ dwc3_writel(dwc->regs, DWC3_LCSR_USB32CTL(i), reg);
+ }
+ }
+ }
+ }
+
return 0;
err_power_off_phy:
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index d56457c02996..415e0215fe00 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -170,6 +170,9 @@
#define DWC3_OEVTEN 0xcc0C
#define DWC3_OSTS 0xcc10
+#define DWC3_LLUCTL(n) (0xd024 + ((n) * 0x80))
+#define DWC3_LCSR_USB32CTL(n) (0xd07c + ((n) * 0x80))
+
/* Bit fields */
/* Global SoC Bus Configuration INCRx Register 0 */
@@ -653,6 +656,16 @@
#define DWC3_OSTS_VBUSVLD BIT(1)
#define DWC3_OSTS_CONIDSTS BIT(0)
+/* LLUCTL Register */
+#define DWC3_LLUCTL_FORCE_GEN1 BIT(10)
+
+/* LCSR_USB32CTL Register */
+#define DWC3_LCSR_USB32CTL_SPEED_MASK 0x3
+#define DWC3_LCSR_GEN_1x1 0
+#define DWC3_LCSR_GEN_1x2 1
+#define DWC3_LCSR_GEN_2x1 2
+#define DWC3_LCSR_GEN_2x2 3
+
/* Structures */
struct dwc3_trb;
--
Thanks,
Thinh
Hi Thinh,
Sure, will split it up into two patches and send as a series. But
might need your help in testing SSP patch as I don't have any device
supporting ssp.
Regards,
Krishna,
