Currently for dwc3_usb31 controller, if maximum_speed is limited to super-speed in DT, then device mode is limited to SS, but host mode still works in SSP. The documentation for max-speed property is as follows: "Tells USB controllers we want to work up to a certain speed. Incase this isn't passed via DT, USB controllers should default to their maximum HW capability." It doesn't specify that the property is only for device mode. There are cases where we need to limit the host's maximum speed to SuperSpeed only. Use this property for host mode to contrain host's speed to SuperSpeed. Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx> --- Link to v1: https://lore.kernel.org/all/20230512170107.18821-1-quic_kriskura@xxxxxxxxxxx/ Discussion regarding the same at: https://lore.kernel.org/all/e465c69c-3a9d-cbdb-d44e-96b99cfa1a92@xxxxxxxxxxx/ drivers/usb/dwc3/core.c | 8 ++++++++ drivers/usb/dwc3/core.h | 5 +++++ 2 files changed, 13 insertions(+) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 278cd1c33841..33bc72595e74 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1262,6 +1262,14 @@ static int dwc3_core_init(struct dwc3 *dwc) } } + if ((hw_mode != DWC3_GHWPARAMS0_MODE_GADGET) && + (DWC3_IP_IS(DWC31)) && + (dwc->maximum_speed == USB_SPEED_SUPER)) { + reg = dwc3_readl(dwc->regs, DWC3_LLUCTL); + reg |= DWC3_LLUCTL_FORCE_GEN1; + dwc3_writel(dwc->regs, DWC3_LLUCTL, reg); + } + return 0; err_power_off_phy: diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 1968638f29ed..5a251da309d4 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -172,6 +172,8 @@ #define DWC3_OEVTEN 0xcc0C #define DWC3_OSTS 0xcc10 +#define DWC3_LLUCTL 0xd024 + /* Bit fields */ /* Global SoC Bus Configuration INCRx Register 0 */ @@ -655,6 +657,9 @@ #define DWC3_OSTS_VBUSVLD BIT(1) #define DWC3_OSTS_CONIDSTS BIT(0) +/* Force Gen1 speed on Gen2 link */ +#define DWC3_LLUCTL_FORCE_GEN1 BIT(10) + /* Structures */ struct dwc3_trb; -- 2.40.0
