Am Sonntag, 15. November 2009 23:15:32 schrieb Theodore Kilgore: > Now, I said something about the OEM drivers. In webcam mode, all of the > OEM drivers that I know of set the default resolution setting at 320x240. > Some of them will not even let you change that. And, using the commands > which can be detected by sniffing, one can not get a 352x288-capable > camera, nor for that matter a 640x480-capable camera, to stream decently > at 352x288 or 176x144. Something comes out, but the frames jump terribly. > It was in eliminating the sources of that jumpiness that I simply got rid > of several setup commands, and thereby landed in the soup by leaving out a > command which appears to be essential for making some of the cameras > stream on a UHCI system. There are obvious lessons to be derived. I have a > long memory, and I think I will apply them. So if I understand you correctly to make the camera work on UHCI you have to go to a lower resolution? Thereby you are lowering the data rate, aren't you? That does a lot less to absolve UHCI, if it works only at a lower rate. Regards Oliver -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
