On 2.04.2023 17:19, Marijn Suijten wrote:
> On 2023-03-21 23:12:31, Konrad Dybcio wrote:
>
> When you get to resending this, change sm8350-nagara in the title to
> sm8350-sagami :)
Even I confuse them, they just look too alike! ;)
Konrad
>
> - Marijn
>
>> As we're heading towards getting the status property last everywhere,
>> take care of it for SM8350 SONY Sagami.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>> ---
>> .../boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi | 30 ++++++++++------------
>> 1 file changed, 14 insertions(+), 16 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
>> index b2baa81baf5e..95b1ba4ce470 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
>> @@ -189,8 +189,8 @@ vph_pwr: vph-pwr-regulator {
>> };
>>
>> &adsp {
>> - status = "okay";
>> firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn";
>> + status = "okay";
>> };
>>
>> &apps_rsc {
>> @@ -542,27 +542,27 @@ pmr735a_l7: ldo7 {
>> };
>>
>> &cdsp {
>> - status = "okay";
>> firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn";
>> + status = "okay";
>> };
>>
>> &i2c1 {
>> - status = "okay";
>> clock-frequency = <1000000>;
>> + status = "okay";
>>
>> /* Some subset of SONY IMX663 camera sensor @ 38 */
>> };
>>
>> &i2c4 {
>> - status = "okay";
>> clock-frequency = <400000>;
>> + status = "okay";
>>
>> /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
>> };
>>
>> &i2c11 {
>> - status = "okay";
>> clock-frequency = <1000000>;
>> + status = "okay";
>>
>> cs35l41_l: speaker-amp@40 {
>> compatible = "cirrus,cs35l41";
>> @@ -596,31 +596,31 @@ cs35l41_r: speaker-amp@41 {
>> };
>>
>> &i2c12 {
>> - status = "okay";
>> /* Clock frequency was not specified downstream, let's park it to 100 KHz */
>> clock-frequency = <100000>;
>> + status = "okay";
>>
>> /* AMS TCS3490 RGB+IR color sensor @ 72 */
>> };
>>
>> &i2c13 {
>> - status = "okay";
>> /* Clock frequency was not specified downstream, let's park it to 100 KHz */
>> clock-frequency = <100000>;
>> + status = "okay";
>>
>> /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
>> };
>>
>> &i2c15 {
>> - status = "okay";
>> clock-frequency = <400000>;
>> + status = "okay";
>>
>> /* NXP SN1X0 NFC @ 28 */
>> };
>>
>> &i2c17 {
>> - status = "okay";
>> clock-frequency = <1000000>;
>> + status = "okay";
>>
>> /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
>> };
>> @@ -652,8 +652,8 @@ mdss_dp_altmode: endpoint {
>> };
>>
>> &mpss {
>> - status = "okay";
>> firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn";
>> + status = "okay";
>> };
>>
>> &pm8350_gpios {
>> @@ -719,8 +719,8 @@ &pon_pwrkey {
>> };
>>
>> &pon_resin {
>> - status = "okay";
>> linux,code = <KEY_VOLUMEUP>;
>> + status = "okay";
>> };
>>
>> &qupv3_id_0 {
>> @@ -748,8 +748,8 @@ &sdhc_2 {
>> };
>>
>> &slpi {
>> - status = "okay";
>> firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn";
>> + status = "okay";
>> };
>>
>> &spi14 {
>> @@ -1038,16 +1038,14 @@ usb_1_dwc3_ss: endpoint {
>> };
>>
>> &usb_1_hsphy {
>> - status = "okay";
>> -
>> vdda-pll-supply = <&pm8350_l5>;
>> vdda18-supply = <&pm8350c_l1>;
>> vdda33-supply = <&pm8350_l2>;
>> + status = "okay";
>> };
>>
>> &usb_1_qmpphy {
>> - status = "okay";
>> -
>> vdda-phy-supply = <&pm8350_l6>;
>> vdda-pll-supply = <&pm8350_l1>;
>> + status = "okay";
>> };
>>
>> --
>> 2.40.0
>>
