As we're heading towards getting the status property last everywhere,
take care of it for SM8350 SONY Sagami.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
.../boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi | 30 ++++++++++------------
1 file changed, 14 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index b2baa81baf5e..95b1ba4ce470 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -189,8 +189,8 @@ vph_pwr: vph-pwr-regulator {
};
&adsp {
- status = "okay";
firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn";
+ status = "okay";
};
&apps_rsc {
@@ -542,27 +542,27 @@ pmr735a_l7: ldo7 {
};
&cdsp {
- status = "okay";
firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn";
+ status = "okay";
};
&i2c1 {
- status = "okay";
clock-frequency = <1000000>;
+ status = "okay";
/* Some subset of SONY IMX663 camera sensor @ 38 */
};
&i2c4 {
- status = "okay";
clock-frequency = <400000>;
+ status = "okay";
/* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
};
&i2c11 {
- status = "okay";
clock-frequency = <1000000>;
+ status = "okay";
cs35l41_l: speaker-amp@40 {
compatible = "cirrus,cs35l41";
@@ -596,31 +596,31 @@ cs35l41_r: speaker-amp@41 {
};
&i2c12 {
- status = "okay";
/* Clock frequency was not specified downstream, let's park it to 100 KHz */
clock-frequency = <100000>;
+ status = "okay";
/* AMS TCS3490 RGB+IR color sensor @ 72 */
};
&i2c13 {
- status = "okay";
/* Clock frequency was not specified downstream, let's park it to 100 KHz */
clock-frequency = <100000>;
+ status = "okay";
/* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
};
&i2c15 {
- status = "okay";
clock-frequency = <400000>;
+ status = "okay";
/* NXP SN1X0 NFC @ 28 */
};
&i2c17 {
- status = "okay";
clock-frequency = <1000000>;
+ status = "okay";
/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
};
@@ -652,8 +652,8 @@ mdss_dp_altmode: endpoint {
};
&mpss {
- status = "okay";
firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn";
+ status = "okay";
};
&pm8350_gpios {
@@ -719,8 +719,8 @@ &pon_pwrkey {
};
&pon_resin {
- status = "okay";
linux,code = <KEY_VOLUMEUP>;
+ status = "okay";
};
&qupv3_id_0 {
@@ -748,8 +748,8 @@ &sdhc_2 {
};
&slpi {
- status = "okay";
firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn";
+ status = "okay";
};
&spi14 {
@@ -1038,16 +1038,14 @@ usb_1_dwc3_ss: endpoint {
};
&usb_1_hsphy {
- status = "okay";
-
vdda-pll-supply = <&pm8350_l5>;
vdda18-supply = <&pm8350c_l1>;
vdda33-supply = <&pm8350_l2>;
+ status = "okay";
};
&usb_1_qmpphy {
- status = "okay";
-
vdda-phy-supply = <&pm8350_l6>;
vdda-pll-supply = <&pm8350_l1>;
+ status = "okay";
};
--
2.40.0
