Re: [PATCH 4/4] arm64: dts: qcom: sm8350-nagara: Unify status property placement

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2023-03-21 23:12:31, Konrad Dybcio wrote:

When you get to resending this, change sm8350-nagara in the title to
sm8350-sagami :)

- Marijn

> As we're heading towards getting the status property last everywhere,
> take care of it for SM8350 SONY Sagami.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
>  .../boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi   | 30 ++++++++++------------
>  1 file changed, 14 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
> index b2baa81baf5e..95b1ba4ce470 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
> @@ -189,8 +189,8 @@ vph_pwr: vph-pwr-regulator {
>  };
>  
>  &adsp {
> -	status = "okay";
>  	firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn";
> +	status = "okay";
>  };
>  
>  &apps_rsc {
> @@ -542,27 +542,27 @@ pmr735a_l7: ldo7 {
>  };
>  
>  &cdsp {
> -	status = "okay";
>  	firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn";
> +	status = "okay";
>  };
>  
>  &i2c1 {
> -	status = "okay";
>  	clock-frequency = <1000000>;
> +	status = "okay";
>  
>  	/* Some subset of SONY IMX663 camera sensor @ 38 */
>  };
>  
>  &i2c4 {
> -	status = "okay";
>  	clock-frequency = <400000>;
> +	status = "okay";
>  
>  	/* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
>  };
>  
>  &i2c11 {
> -	status = "okay";
>  	clock-frequency = <1000000>;
> +	status = "okay";
>  
>  	cs35l41_l: speaker-amp@40 {
>  		compatible = "cirrus,cs35l41";
> @@ -596,31 +596,31 @@ cs35l41_r: speaker-amp@41 {
>  };
>  
>  &i2c12 {
> -	status = "okay";
>  	/* Clock frequency was not specified downstream, let's park it to 100 KHz */
>  	clock-frequency = <100000>;
> +	status = "okay";
>  
>  	/* AMS TCS3490 RGB+IR color sensor @ 72 */
>  };
>  
>  &i2c13 {
> -	status = "okay";
>  	/* Clock frequency was not specified downstream, let's park it to 100 KHz */
>  	clock-frequency = <100000>;
> +	status = "okay";
>  
>  	/* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
>  };
>  
>  &i2c15 {
> -	status = "okay";
>  	clock-frequency = <400000>;
> +	status = "okay";
>  
>  	/* NXP SN1X0 NFC @ 28 */
>  };
>  
>  &i2c17 {
> -	status = "okay";
>  	clock-frequency = <1000000>;
> +	status = "okay";
>  
>  	/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
>  };
> @@ -652,8 +652,8 @@ mdss_dp_altmode: endpoint {
>  };
>  
>  &mpss {
> -	status = "okay";
>  	firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn";
> +	status = "okay";
>  };
>  
>  &pm8350_gpios {
> @@ -719,8 +719,8 @@ &pon_pwrkey {
>  };
>  
>  &pon_resin {
> -	status = "okay";
>  	linux,code = <KEY_VOLUMEUP>;
> +	status = "okay";
>  };
>  
>  &qupv3_id_0 {
> @@ -748,8 +748,8 @@ &sdhc_2 {
>  };
>  
>  &slpi {
> -	status = "okay";
>  	firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn";
> +	status = "okay";
>  };
>  
>  &spi14 {
> @@ -1038,16 +1038,14 @@ usb_1_dwc3_ss: endpoint {
>  };
>  
>  &usb_1_hsphy {
> -	status = "okay";
> -
>  	vdda-pll-supply = <&pm8350_l5>;
>  	vdda18-supply = <&pm8350c_l1>;
>  	vdda33-supply = <&pm8350_l2>;
> +	status = "okay";
>  };
>  
>  &usb_1_qmpphy {
> -	status = "okay";
> -
>  	vdda-phy-supply = <&pm8350_l6>;
>  	vdda-pll-supply = <&pm8350_l1>;
> +	status = "okay";
>  };
> 
> -- 
> 2.40.0
> 



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux