On 08/03/2023 09:27, Minda Chen wrote: > Add StarFive JH7110 SoC USB 3.0 phy dt-binding. > USB controller is cadence USB 3.0 IP. Subject: drop second/last, redundant "binding". The "dt-bindings" prefix is already stating that these are bindings. > > Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx> > --- > .../bindings/phy/starfive,jh7110-usb-phy.yaml | 158 ++++++++++++++++++ > 1 file changed, 158 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml > > diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml > new file mode 100644 > index 000000000000..daa88d065deb > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml > @@ -0,0 +1,158 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/phy/starfive,jh7110-usb-phy.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: StarFive USB 2.0 and 3.0 PHY > + > +maintainers: > + - Minda Chen<minda.chen@xxxxxxxxxxxxxxxx> Missing space > + > +properties: > + compatible: > + items: Drop items, it's just one item. > + - const: starfive,jh7110-usb > + > + reg: > + maxItems: 2 > + > + reg-names: > + items: > + - const: usb3 > + - const: usb2 > + > + clocks: > + items: > + - description: usb 125m clock > + - description: app 125m clock > + - description: lpm clock > + - description: stb clock > + - description: apb clock > + - description: axi clock > + - description: utmi apb clock > + > + clock-names: > + items: > + - const: usb_125m > + - const: usb0_app_125 > + - const: usb0_lpm > + - const: usb0_stb > + - const: usb0_apb > + - const: usb0_axi > + - const: usb0_utmi_apb > + > + resets: > + items: > + - description: USB0_PWRUP reset > + - description: USB0_APB reset > + - description: USB0_AXI reset > + - description: USB0_UTMI_APB reset > + > + starfive,sys-syscon: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + items: > + items: > + - description: phandle to System Register Controller sys_syscon node. > + - description: offset of SYS_SYSCONSAIF__SYSCFG register for USB. > + description: > + The phandle to System Register Controller syscon node and the offset > + of SYS_SYSCONSAIF__SYSCFG register for USB. > + > + starfive,stg-syscon: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + items: > + items: > + - description: phandle to System Register Controller stg_syscon node. > + - description: register0 offset of STG_SYSCONSAIF__SYSCFG register for USB. > + - description: register1 offset of STG_SYSCONSAIF__SYSCFG register for USB. > + - description: register2 offset of STG_SYSCONSAIF__SYSCFG register for USB. > + - description: register3 offset of STG_SYSCONSAIF__SYSCFG register for USB. > + description: > + The phandle to System Register Controller syscon node and the offset > + of STG_SYSCONSAIF__SYSCFG register for USB. Total 4 regsisters offset > + for USB. > + > + dr_mode: > + description: PHY mode. > + enum: > + - host > + - peripheral > + - otg > + > + "#address-cells": > + maximum: 2 > + > + "#size-cells": > + maximum: 2 > + > + ranges: true > + > + starfive,usb2-only: > + type: boolean > + description: Set USB using usb 2.0 phy. Supprt USB 2.0 only > + > +required: > + - compatible > + - reg > + - reg-names > + - clocks > + - clock-names > + - resets > + - starfive,sys-syscon > + - starfive,stg-syscon > + - dr_mode > + - "#address-cells" > + - "#size-cells" > + - ranges > + > +patternProperties: This goes before required block > + "^usb@[0-9a-f]+$": > + type: object > + description: | > + usbphy node should have '1' usb controller subnode. > + It could be Cadence USB3 DRD controller. > + Cadence USB3 should follow the bindings specified in > + Documentation/devicetree/bindings/usb/cdns,usb3.yaml $ref instead of free form text Best regards, Krzysztof