Re: [PATCH v2 1/3] dt-bindings: phy: Add StarFive JH7110 USB dt-binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2023/3/9 2:12, Rob Herring wrote:
> On Wed, Mar 08, 2023 at 04:27:58PM +0800, Minda Chen wrote:
>> Add StarFive JH7110 SoC USB 3.0 phy dt-binding.
>> USB controller is cadence USB 3.0 IP.
>> 
>> Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
>> ---
>>  .../bindings/phy/starfive,jh7110-usb-phy.yaml | 158 ++++++++++++++++++
>>  1 file changed, 158 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
>> 
>> diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
>> new file mode 100644
>> index 000000000000..daa88d065deb
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
> 
> Filename should match the compatible. The filename seems more correct 
> than the compatible...
> 
[1] jh7110 USB dts configure is similar to  Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
But we have PHY (10200000). So I will add  Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
as a wrap level.
starfive,jh7110-usb-phy.yaml contains only phy setting.
>> @@ -0,0 +1,158 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/phy/starfive,jh7110-usb-phy.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: StarFive USB 2.0 and 3.0 PHY
>> +
>> +maintainers:
>> +  - Minda Chen<minda.chen@xxxxxxxxxxxxxxxx>
>> +
>> +properties:
>> +  compatible:
>> +    items:
>> +      - const: starfive,jh7110-usb
> 
> What's the USB controller called?
> 
I will change to "starfive,jh7110-usb-phy"
>> +
>> +  reg:
>> +    maxItems: 2
>> +
>> +  reg-names:
>> +    items:
>> +      - const: usb3
>> +      - const: usb2
>> +
>> +  clocks:
>> +    items:
>> +      - description: usb 125m clock
>> +      - description: app 125m clock
>> +      - description: lpm clock
>> +      - description: stb clock
>> +      - description: apb clock
>> +      - description: axi clock
>> +      - description: utmi apb clock
>> +
>> +  clock-names:
>> +    items:
>> +      - const: usb_125m
>> +      - const: usb0_app_125
>> +      - const: usb0_lpm
>> +      - const: usb0_stb
>> +      - const: usb0_apb
>> +      - const: usb0_axi
>> +      - const: usb0_utmi_apb
> 
> usb_ and usb0_ is redundant, drop.
> 
ok
>> +
>> +  resets:
>> +    items:
>> +      - description: USB0_PWRUP reset
>> +      - description: USB0_APB reset
>> +      - description: USB0_AXI reset
>> +      - description: USB0_UTMI_APB reset
>> +
>> +  starfive,sys-syscon:
>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>> +    items:
>> +      items:
> 
ok
> Are there multiple entries of phandle+offset because this says there 
> are. You want '- items:' here to limit it to 1 phandle+offset.
> 
>> +        - description: phandle to System Register Controller sys_syscon node.
>> +        - description: offset of SYS_SYSCONSAIF__SYSCFG register for USB.
>> +    description:
>> +      The phandle to System Register Controller syscon node and the offset
>> +      of SYS_SYSCONSAIF__SYSCFG register for USB.
>> +
>> +  starfive,stg-syscon:
>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>> +    items:
>> +      items:
> 
> Same here.
> 
ok
>> +        - description: phandle to System Register Controller stg_syscon node.
>> +        - description: register0 offset of STG_SYSCONSAIF__SYSCFG register for USB.
>> +        - description: register1 offset of STG_SYSCONSAIF__SYSCFG register for USB.
>> +        - description: register2 offset of STG_SYSCONSAIF__SYSCFG register for USB.
>> +        - description: register3 offset of STG_SYSCONSAIF__SYSCFG register for USB.
>> +    description:
>> +      The phandle to System Register Controller syscon node and the offset
>> +      of STG_SYSCONSAIF__SYSCFG register for USB. Total 4 regsisters offset
>> +      for USB.
>> +
>> +  dr_mode:
> 
> Usually this belongs in the controller node.
> 
cdns3 usb controller IP default set to host mode. If cdns3 usb controller "dr_mode"
set to "peripheral", cdns3 controller can't be registered.

in driver/usb/cdns3/core.c
132         } else if (cdns->dr_mode != dr_mode) {
133                 dev_err(dev, "Incorrect DRD configuration\n");
134                 return -EINVAL;
135         }


If dr_mode is not set in int wrap level, peripheral mode can not be work.

And I see other USB PHY contain dr-mode setting.
>> +    description: PHY mode.
>> +    enum:
>> +      - host
>> +      - peripheral
>> +      - otg
>> +
>> +  "#address-cells":
>> +    maximum: 2
>> +
>> +  "#size-cells":
>> +    maximum: 2
>> +
>> +  ranges: true
>> +
>> +  starfive,usb2-only:
>> +    type: boolean
>> +    description: Set USB using usb 2.0 phy. Supprt USB 2.0 only
> 
> The 'maximum-speed' property in the controller should be enough. Why is 
> this needed.
> 
maybe I can delete this setting.
> Being a PHY, you are missing #phy-cells.
> 
ok
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - reg-names
>> +  - clocks
>> +  - clock-names
>> +  - resets
>> +  - starfive,sys-syscon
>> +  - starfive,stg-syscon
>> +  - dr_mode
>> +  - "#address-cells"
>> +  - "#size-cells"
>> +  - ranges
>> +
>> +patternProperties:
>> +  "^usb@[0-9a-f]+$":
>> +    type: object
>> +    description: |
>> +      usbphy node should have '1' usb controller subnode.
>> +      It could be Cadence USB3 DRD controller.
>> +      Cadence USB3 should follow the bindings specified in
>> +      Documentation/devicetree/bindings/usb/cdns,usb3.yaml
> 
> Why is the controller a child of the phy?
> 
same as [1]. I will change this .
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    usbphy@10200000 {
>> +      compatible = "starfive,jh7110-usb";
>> +      reg = <0x10210000 0x1000>,
>> +            <0x10200000 0x1000>;
>> +      reg-names = "usb3", "usb2";
>> +      clocks = <&syscrg 95>,
>> +               <&stgcrg 6>,
>> +               <&stgcrg 4>,
>> +               <&stgcrg 5>,
>> +               <&stgcrg 1>,
>> +               <&stgcrg 3>,
>> +               <&stgcrg 2>;
>> +      clock-names = "usb_125m", "usb0_app_125", "usb0_lpm",
>> +                    "usb0_stb", "usb0_apb", "usb0_axi", "usb0_utmi_apb";
>> +      resets = <&stgcrg 10>,
>> +               <&stgcrg 8>,
>> +               <&stgcrg 7>,
>> +               <&stgcrg 9>;
>> +      starfive,stg-syscon = <&stg_syscon 0x4 0xc4 0x148 0x1f4>;
>> +      starfive,sys-syscon = <&sys_syscon 0x18>;
>> +      dr_mode = "host";
>> +      #address-cells = <1>;
>> +      #size-cells = <1>;
>> +      ranges;
>> +
>> +      usb@10100000 {
>> +        compatible = "cdns,usb3";
> 
> This needs a platform specific compatible.
> 
same as [1]
>> +        reg = <0x10100000 0x10000>,
>> +              <0x10110000 0x10000>,
>> +              <0x10120000 0x10000>;
>> +        reg-names = "otg", "xhci", "dev";
>> +        interrupts = <100>, <108>, <110>;
>> +        interrupt-names = "host", "peripheral", "otg";
>> +        phy-names = "cdns3,usb3-phy", "cnds3,usb2-phy";
>> +        maximum-speed = "super-speed";
>> +      };
>> +    };
>> -- 
>> 2.17.1
>> 



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux