Hi Minas, Can you please look at the log files I sent, when you get a chance? Thanks, Palak -----Original Message----- From: Palak SHAH Sent: Monday, February 27, 2023 3:21 PM To: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>; Maynard CABIENTE <maynard.cabiente@xxxxxxxxxxx> Cc: linux-usb@xxxxxxxxxxxxxxx Subject: RE: usb: gadget: dwc2: not getting audio data Hi Minas, I have attached the following USB traces and debug log. 1) dmesg and usb sniffer logs during driver loading. 2) EP1(OUT) - I play AUDIO on the HOST. And I do arecord on the linux device that acts as USB gadget. So the audio is going OUT from the host. So you will see EP1 OUT. I have attached logs and USB sniffer data, during arecord. I am not testing ISOC EP1(IN) yet. I am still seeing and debugging issues with Ep1(out). 3) When I change UAC1_DEF_REQ_NUM 2 changed to 32, the problem STILL exist with EP1(OUT). ONLY log behaivor is different. In the log I see XferCompl, but I don’t get any data in the arecord. I have attached 2 files. Arecord_command.txt shows what I run. Arecord_output shows what I get after I run the command. 4) I sent you regdump, hw_params, params and fifo in the previous email. Thanks, Palak -----Original Message----- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx> Sent: Monday, February 27, 2023 5:18 AM To: Palak SHAH <palak.shah@xxxxxxxxxxx>; Maynard CABIENTE <maynard.cabiente@xxxxxxxxxxx> Cc: linux-usb@xxxxxxxxxxxxxxx Subject: RE: usb: gadget: dwc2: not getting audio data Hi Palak, >On 2/27/2023 6:02 AM, Palak SHAH wrote: >From: Palak SHAH <palak.shah@xxxxxxxxxxx> >Sent: Monday, February 27, 2023 6:02 AM >To: Minas Harutyunyan <hminas@xxxxxxxxxxxx>; Maynard CABIENTE ><maynard.cabiente@xxxxxxxxxxx> >Cc: linux-usb@xxxxxxxxxxxxxxx >Subject: RE: usb: gadget: dwc2: not getting audio data > >Hi Minas, >Please find attached the logs - regdump, hw_params, params and fifo, >taken when the driver is loaded. > >I will send the USB traces tomorrow. USB trace for arecord (EP1IN ISOC) and debug log. Could you please confirm that after defining UAC1_DEF_REQ_NUM to 32 playing audio (EP1OUT ISOC) no any issue seen? Thanks, Minas > >Thanks, >Palak > >-----Original Message----- >From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx> >Sent: Friday, February 24, 2023 5:33 AM >To: Palak SHAH <palak.shah@xxxxxxxxxxx>; Maynard CABIENTE ><maynard.cabiente@xxxxxxxxxxx> >Cc: linux-usb@xxxxxxxxxxxxxxx >Subject: RE: usb: gadget: dwc2: not getting audio data > >Hi Polak, > >>On 2/24/2023 3:04 AM, Palak SHAH wrote: >>From: Palak SHAH <palak.shah@xxxxxxxxxxx> >>Sent: Friday, February 24, 2023 3:04 AM >>To: Minas Harutyunyan <hminas@xxxxxxxxxxxx>; Maynard CABIENTE >><maynard.cabiente@xxxxxxxxxxx> >>Cc: linux-usb@xxxxxxxxxxxxxxx >>Subject: RE: usb: gadget: dwc2: not getting audio data >> >>Hi Minas, >>I have attached the log where I connect to the audio gadget (and >>therefore, load the driver). We can do it using command line on a >>serial prompt or using GUI and connecting to Audio gadget. >> >>However, in both cases, I don’t see any EP1(out) data and the register >dump. >>Ep1out comes out only when I play a you tube video and I do arecord to >>capture data. > >According your device configuration EP1(out) using when you play audio, >and >EP1(in) using when you record audio by arecord. >So, after driver loading these both ISOC EP's will not seen in log >until aplay/arecord will not run. > >> >>Please let me know if the log doesn’t have the information you need. > >No, it's again dmesg. I asked for core all register dump which >available under debugfs's. dwc2 debugfs's under follow directory: >/sys/kernel/debug/usb/dwc2.2.auto/ >In your case 'dwc2.2.auto' can be little bit different. In this >directory there are files regdump, hw_params, params, fifo, etc. Just >use 'cat regdump' >to get register dump. Please also provide me cat of hw_params, params >and fifo. These last 3 files need to cat just once after driver loading. > >> >>Also, I tried changing UAC1_DEF_REQ_NUM 2 changed to 32. I saw a >>change in the behaivor of logs, I got XferCompl all the time, and not ep_disabled. > >So, after defining UAC1_DEF_REQ_NUM to 32 playing audio (ep1out) work >without any issue? And increasing req number to 32 fixed issue which we >debug till now? > >>However, arecord behaivor did not change, meaning I still did not get >>the data. It only changed the logging behaivor. > >If you still see issues with arecord (ep1in) then please provide me >debug log for this case and USB trace by Ellisys. > >Thanks, >Minas > > > >________________________________ > >Ce message, ainsi que tous les fichiers joints à ce message, peuvent >contenir des informations sensibles et/ ou confidentielles ne devant >pas être divulguées. Si vous n'êtes pas le destinataire de ce message >(ou que vous recevez ce message par erreur), nous vous remercions de le >notifier immédiatement à son expéditeur, et de détruire ce message. >Toute copie, divulgation, modification, utilisation ou diffusion, non >autorisée, directe ou indirecte, de tout ou partie de ce message, est strictement interdite. > > >This e-mail, and any document attached hereby, may contain confidential >and/or privileged information. If you are not the intended recipient >(or have received this e-mail in error) please notify the sender >immediately and destroy this e-mail. Any unauthorized, direct or >indirect, copying, disclosure, distribution or other use of the >material or parts thereof is strictly forbidden. ________________________________ Ce message, ainsi que tous les fichiers joints à ce message, peuvent contenir des informations sensibles et/ ou confidentielles ne devant pas être divulguées. Si vous n'êtes pas le destinataire de ce message (ou que vous recevez ce message par erreur), nous vous remercions de le notifier immédiatement à son expéditeur, et de détruire ce message. Toute copie, divulgation, modification, utilisation ou diffusion, non autorisée, directe ou indirecte, de tout ou partie de ce message, est strictement interdite. This e-mail, and any document attached hereby, may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized, direct or indirect, copying, disclosure, distribution or other use of the material or parts thereof is strictly forbidden.
