Hi Daniel, Daniel Mack wrote:
Sorry for the long delay on this issue. Here comes another round of four patches to support the EHCI ports on Freescale's MX2/MX3 SoCs. The difference to the last version I've sent is that the ISP1504 specific drivers has become a generic ULPI driver now with all the defines renamed. Also the driver does not set DRV_VBUS and DRV_VBUS_EXT blindly anymore but uses a flags field in the otg_transceiver struct which can be specified when creating the device. This allows the adaption of the code to a wider variety of applications. As a reference, I've added a patch to add board specific support code for the lilly1131 module.
I have such a patch for mx31moboard too. Sascha, should I send it to you now or wait ?
Let me know if that still works for other boards and if that version looks better to you.
I cannnot say much about the code, it seems that you have addressed all the comments on the previous version (especially about the ulpi genericity). I can however confirm that it still works well on mx31moboard.
Again, #1, #2 and #4 are supposed to go thru the USB folks' channel, while the rest might be picked by Sascha Hauer eventually. Thanks, Daniel [PATCH 1/5] USB OTG: add support for ulpi connected external transceivers [PATCH 2/5] USB OTG: Add generic driver for ULPI OTG transceiver [PATCH 3/5] MXC: Add support for ULPI Viewports [PATCH 4/5] USB: Add EHCI support for MX27 and MX31 based boards [PATCH 5/5] MX3: add USB support for lilly1131
Val -- Valentin Longchamp, PhD Student, EPFL-STI-LSRO1 valentin.longchamp@xxxxxxx, Phone: +41216937827 http://people.epfl.ch/valentin.longchamp MEA3485, Station 9, CH-1015 Lausanne -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
