If core doesn't support hibernation or partial power
down power saving options, power can still be saved
using clock gating on all the clocks.
- Added entering clock gating state from USB_SUSPEND
interrupt.
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
---
drivers/usb/dwc2/core_intr.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index 8c0152b514be..ab7fe303c0f9 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -529,14 +529,18 @@ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg)
/* Ask phy to be suspended */
if (!IS_ERR_OR_NULL(hsotg->uphy))
usb_phy_set_suspend(hsotg->uphy, true);
- }
-
- if (hsotg->hw_params.hibernation) {
+ } else if (hsotg->hw_params.hibernation) {
ret = dwc2_enter_hibernation(hsotg, 0);
if (ret && ret != -ENOTSUPP)
dev_err(hsotg->dev,
"%s: enter hibernation failed\n",
__func__);
+ } else {
+ /*
+ * If not hibernation nor partial power down are supported,
+ * clock gating is used to save power.
+ */
+ dwc2_gadget_enter_clock_gating(hsotg);
}
skip_power_saving:
/*
--
2.25.1
