[PATCH 04/12] usb: dwc2: Add exit clock gating from wakeup interrupt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Added exit from clock gating mode when wakeup interrupt
is detected. To exit from the clock gating
in device mode "dwc2_gadget_exit_clock_gating()"
function is used with rem_wakeup parameter 0. To exit
clock gating in host mode "dwc2_host_exit_clock_gating()"
with rem_wakeup parameter 1.

Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
---
 drivers/usb/dwc2/core_intr.c | 33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index ab7fe303c0f9..c764407e7633 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -415,17 +415,24 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 	if (dwc2_is_device_mode(hsotg)) {
 		dev_dbg(hsotg->dev, "DSTS=0x%0x\n",
 			dwc2_readl(hsotg, DSTS));
-		if (hsotg->lx_state == DWC2_L2 && hsotg->in_ppd) {
-			u32 dctl = dwc2_readl(hsotg, DCTL);
-			/* Clear Remote Wakeup Signaling */
-			dctl &= ~DCTL_RMTWKUPSIG;
-			dwc2_writel(hsotg, dctl, DCTL);
-			ret = dwc2_exit_partial_power_down(hsotg, 1,
-							   true);
-			if (ret)
-				dev_err(hsotg->dev,
-					"exit partial_power_down failed\n");
-			call_gadget(hsotg, resume);
+		if (hsotg->lx_state == DWC2_L2) {
+			if (hsotg->in_ppd) {
+				u32 dctl = dwc2_readl(hsotg, DCTL);
+				/* Clear Remote Wakeup Signaling */
+				dctl &= ~DCTL_RMTWKUPSIG;
+				dwc2_writel(hsotg, dctl, DCTL);
+				ret = dwc2_exit_partial_power_down(hsotg, 1,
+								   true);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit partial_power_down failed\n");
+				call_gadget(hsotg, resume);
+			}
+
+			/* Exit gadget mode clock gating. */
+			if (hsotg->params.power_down ==
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
+				dwc2_gadget_exit_clock_gating(hsotg, 0);
 		} else {
 			/* Change to L0 state */
 			hsotg->lx_state = DWC2_L0;
@@ -440,6 +447,10 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 						"exit partial_power_down failed\n");
 			}
 
+			if (hsotg->params.power_down ==
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
+				dwc2_host_exit_clock_gating(hsotg, 1);
+
 			/*
 			 * If we've got this quirk then the PHY is stuck upon
 			 * wakeup.  Assert reset.  This will propagate out and
-- 
2.25.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux